Android 14 solutions

[AndreyPavlenko]

For rooted devices with Magisk:

• Download the latest LSPosed zygisk module - https://github.com/LSPosed/LSPosed/releases.
• Launch Magisk Manager, go to Modules and install the module.
• Go to settings, enable Zygisk and reboot.
• Install the latest Fermata Auto - https://github.com/AndreyPavlenko/Fermata/releases.
• After the installation, LSPosed should detect a new module.
• Launch the LSPosed manager. If you can't find the launcher, dial *#*#5776733#*#*.
• Go to modules, enable Fermata Auto and restart.

For non-rooted devices:

0. Easy solution - use the AAWireless device and enable dev mode in the device settings.

Duplicating this post by @cosminmocan here:

Been following this thread and saw a few things that kept repeating, and I can only imagine how annoying it must be for people trying to help others and the dev himself, because of that , i will try to make a short summary of the 'possibilities' people have in order to have the video back, also , I will split them in 2 :

2. Main phone, probably with android 14, NOT ROOTED

   Method A: Using DHU connect to your phone, and start fermata FS app, disconnect the phone and voilla , next time you use your phone, your phone will auto start fermata
   BONUS: Use the following command to always allow screen projection to fermata:
   adb shell appops set me.aap.fermata.auto.dear.google.why PROJECT_MEDIA allow

   [Method B]: This works only if your vehicle supports wired android auto, as you will need to BUY a dongle created by another awesome android auto developer, the dongle is called AAWireless. The way this would work is that the dongle acts as a man-in-the-middle and present to the phone as DHU, with developer mode activated, and thaths why you will see all the apps that you usually see with the emulator

3. Secondary phone, can be older, can be extremely cheap if bought second hand with cracked screen.

   Method: You will first need to root this phone, after rooting there are probably more variants of getting it up and running, I will present mine, which is likely outdated but works.

   1. The rooting part will be different for each phone and os version, for this example, the one I used is note9 that i got for free with a 75% working screen
   2. Using king installer I installed the latest fermata auto and control
   3. I have also installed AA AIO TWEAKER
   4. With the Aio Tweaker , i patched fermata to be available in android auto
   5. Open fermata, configure as you need
   6. Go to your car connect this phone, either wired or wireless to be used for android auto
   7. Enjoy fermata
      Bonus: Most cars support multiple phones connected, so you can still connect you main phone for calls, and if you stick a data sim your second phone, you would also be able to have waze running on it.

For me, the the secondary phone method was the only option, as bmw in their infinite wisdom only support wireless android auto, so i keep the phone in my car connected constantly(it only charges when the ignition is on) and everything works wonderful, this also allowed me to have some tasker profiles that send the location of the car every time the usb connection is interrupted via telegram 🗺️

I really hope the above would prevent the same questions from being answered over and over again, and I really hope people will not start making youtube videos again as those only attract bad attention

[2da2sa]

What's DHU?

[2da2sa]

If i root s23 ultra i see fermata? Besarse i see fermata media servicr but not working in auto screen

[AndreyPavlenko]

Yes. Added instruction for rooted devices.

[JVKeller]

Has anyone tried downgrading AA to see if it will go back to working as intended?

I tried installing an older version, but I didn't have the tools on hand to remove 11.

[Ekremyildirim20]

Bendeki redmi not 12 pro 5g cihazda miui 14 android 13 te fermaoto 1.9.9 video ve ses çalıyor.
Hieprios 1.0.3 android 14 fermaoto video çalışmıyor sadece ses çalıyor.
Geri miui 14 android 13 işletim sistemine döndüğümde fermaoto yeniden ses ve video çalıyor.

[Respect911]

Following the first path described above, I understand that if I install the emulator on the computer, run the program, disconnect the phone, then when I get in the car and connect the phone, it should work and I will see Fermata in Android Auto too, correct? I have wireless connection in my car, so when I get in the car, Android Auto launches immediately. After downloading the Fermata player from Google Play, I saw the player but Fermata Auto is missing. If I perform all operations described in method one, should everything work?

[porkis1974]

For rooted devices with Magisk:

• Download the latest LSPosed zygisk module - https://github.com/LSPosed/LSPosed/releases.
• Launch Magisk Manager, go to Modules and install the module.
• Go to settings, enable Zygisk and reboot.
• Install the latest Fermata Auto - https://github.com/AndreyPavlenko/Fermata/releases.
• After the installation, LSPosed should detect a new module.
• Launch the LSPosed manager. If you can't find the launcher, dial *#*#5776733#*#*.
• Go to modules, enable Fermata Auto and restart.

For non-rooted devices:

Duplicating this post by @cosminmocan here:

Been following this thread and saw a few things that kept repeating, and I can only imagine how annoying it must be for people trying to help others and the dev himself, because of that , i will try to make a short summary of the 'possibilities' people have in order to have the video back, also , I will split them in 2 :

1. Main phone, probably with android 14, NOT ROOTED
   Method A: Using DHU connect to your phone, and start fermata FS app, disconnect the phone and voilla , next time you use your phone, your phone will auto start fermata
   BONUS: Use the following command to always allow screen projection to fermata:
   adb shell appops set me.aap.fermata.auto.dear.google.why PROJECT_MEDIA allow
   [Method B]: This works only if your vehicle supports wired android auto, as you will need to BUY a dongle created by another awesome android auto developer, the dongle is called AAWireless. The way this would work is that the dongle acts as a man-in-the-middle and present to the phone as DHU, with developer mode activated, and thaths why you will see all the apps that you usually see with the emulator

2. Secondary phone, can be older, can be extremely cheap if bought second hand with cracked screen.
   Method: You will first need to root this phone, after rooting there are probably more variants of getting it up and running, I will present mine, which is likely outdated but works.

   1. The rooting part will be different for each phone and os version, for this example, the one I used is note9 that i got for free with a 75% working screen
   2. Using king installer I installed the latest fermata auto and control
   3. I have also installed AA AIO TWEAKER
   4. With the Aio Tweaker , i patched fermata to be available in android auto
   5. Open fermata, configure as you need
   6. Go to your car connect this phone, either wired or wireless to be used for android auto
   7. Enjoy fermata
      Bonus: Most cars support multiple phones connected, so you can still connect you main phone for calls, and if you stick a data sim your second phone, you would also be able to have waze running on it.

For me, the the secondary phone method was the only option, as bmw in their infinite wisdom only support wireless android auto, so i keep the phone in my car connected constantly(it only charges when the ignition is on) and everything works wonderful, this also allowed me to have some tasker profiles that send the location of the car every time the usb connection is interrupted via telegram 🗺️

I really hope the above would prevent the same questions from being answered over and over again, and I really hope people will not start making youtube videos again as those only attract bad attention

Good afternoon, I tried method A with DHU, I started Fermata and is works, I checked and it was on the AA phone also. After few seconds I disconnect the phone it disappears again from the app on Android Auto.
@AndreyPavlenko
thanks for any help.
Andrea

[AndreyPavlenko]

You should not start any other app in AA, otherwise, you have to repeat the procedure with DHU.

[porkis1974]

Thanks for answer.
I tried again and I did It. As long as the phone Is connected on PC and AA Is running on DHU I see Fermata also on the phone, then when I unplug the phone disapoear. I opened only fermata, but of course other apps such Google Maps opens by default. 😐

[AndreyPavlenko]

The main idea is to launch Fermata FS Mirror on DHU. On the next connection to the car, it will be started automatically instead of gmaps.

[AndreyPavlenko]

But if I hit any of the buttons at the bottom like Maps

This is a known issue. Fermata Mirror FS is built as a navigation app, that's why AA starts it on connect. As a workaround, do not start any AA apps, use the mirrored apps from the phone.

[AndreyPavlenko]

A simple solution is AA Wireless.

[CodexHere]

I wanted to update my findings by going through my steps. Between the docs here, and the docs on the Google SDK site, I didn't feel like it was a clear enough tutorial for the users here and wanted to formalize something more thorougly documented.

⚠ First and foremost I'm running linux, and YMMV ⚠

---

Set Up PC

1 - Install Android Studio through flatpak. It was quick and painless.

If you're running Windows or OSX be sure to read the official site for install steps.

flatpak install com.google.AndroidStudio

Go through all the intial setup with the defaults. Close after this, we have a little bit of configuration to do.

2 - Set up the path inclusion for adb. This depends on your shell and how you have things configured:

PATH="$PATH:<...>:$HOME/Android/Sdk/platform-tools"

Don't forget to restart your terminal to pick up this new path!

3 - Run Android Studio and install DHU:

I started by following the official documentation as linked in the thread, but the docs are a tiny bit stale and weren't straightforward enough.

3a - Open Android Studio

You should have already gone through initial SDK install in Step 1!

If the full studio opens (ie, to a project) just go to Settings. If you're presented with a "Welcome" popup, click "Customize" and at the very bottom All Settings...

You do NOT need a project!

3b - Install DHU:

The docs show the wrong location for DHU - it's located in Language & Frameworks > Android SDK, then you'll want to click the SDK Tool tab in the middle. Install it, and you should be good. I didn't need to change exec permissions. You can close Android Studio now.

Connect to your Device

Android Studio, and the path configuration, should allow us access to adb.

1 - Enable Developer Options on your device. Look it up, but generally you tap the "Software Version" a bunch of times until it tells you you have enabled it. Some devices and OS' may do it a tiny bit different or it might be hidden, so do some google-fu if you can't figure it out.

2 - In Developer Options enable "USB Debugging", and optionally "Wireless Debugging" if you want to go... wireless!

If using Wireless Debugging, enable it and click the left side of the menu item to view Pair/Connect information:

# If never Paired before, on your device click "Pair device with pairing code".
# Use the IP/PORT/Code combination in place of below:
$ adb pair 192.168.1.10:42513 377728   
# Next, on your device get the IP/Port from the Wireless Debugging menu:
$ adb connect 192.168.1.10:41435
connected to 192.168.1.10:41435

NOTE: IP, ports, and Pairing Codes are shown on your device, use that and not what's listed here!

If USB Debugging, it should prompt you on the device. If it doesn't and defaults to file transfer, or to charging only, look at your notifications. You can enable debugging over USB by tapping it and choosing the option.

3 - Ensure you're connected and see your device listed:

$ adb devices
List of devices attached
192.168.1.10:41435      device

If you don't see your device, you will need to start doing some research and put in effort - you cannot continue if you cannot connect!

Install & Prep Fermata Auto

1 - Install KingInstaller.

2 - Using KingInstaller on the device, Install Fermata Auto

NOTE: After selecting the APK and selecting "Install", you'll need to choose the default installer. The KingInstaller should have "USE THE OTHER ONE", don't use that one as it says!

3 - Open Fermata Auto and make sure it works. You can set up folders and whatnot if you want, that's not really the point here though.

4 (optional) - I had to "Disable Permission Monitoring" in Developer Options to run the following adb command:

# Allows app to capture the device's screen/audio
adb shell appops set me.aap.fermata.auto.dear.google.why PROJECT_MEDIA allow

Otherwise I was getting the error:

Exception occurred while executing 'set':
java.lang.SecurityException: uid 2000 does not have android.permission.MANAGE_APP_OPS_MODES.
	at android.app.ContextImpl.enforce(ContextImpl.java:2376)
	at android.app.ContextImpl.enforcePermission(ContextImpl.java:2385)
	at com.android.server.appop.AppOpsService.enforceManageAppOpsModes(AppOpsService.java:1805)
	at com.android.server.appop.AppOpsService.setMode(AppOpsService.java:1998)
	at com.android.server.appop.AppOpsService.setMode(AppOpsService.java:1986)
	at com.android.server.appop.AppOpsService.onShellCommand(AppOpsService.java:4756)
	at com.android.server.appop.AppOpsService$Shell.onCommand(AppOpsService.java:4525)
	at com.android.modules.utils.BasicShellCommandHandler.exec(BasicShellCommandHandler.java:97)
	at android.os.ShellCommand.exec(ShellCommand.java:38)
	at com.android.server.appop.AppOpsService.onShellCommand(AppOpsService.java:4697)
	at android.os.Binder.shellCommand(Binder.java:1092)
	at android.os.Binder.onTransact(Binder.java:912)
	at com.android.internal.app.IAppOpsService$Stub.onTransact(IAppOpsService.java:1120)
	at android.os.Binder.execTransactInternal(Binder.java:1392)
	at android.os.Binder.execTransact(Binder.java:1299)

Connect DHU to your Device

As noted in the official docs, the install path for DHU is in <SDK_LOCATION>/extras/google/auto/. You can either put this in your path, or you can navigate your terminal to the folder.

1 - Open Android Auto. Just like the Android Dev Options, YMMV as to where to find it. For me, it was Settings > Connection & sharing > Android Auto.

2 - Enable Android Auto Dev Options. Also like the standard Android Dev Options, we need to tap the "Version" menu item at the bottom a bunch until it's enabled.

Once it's enabled, tapping it will expand the pane and you'll see all the apps, their versions, and permissions available on your Device.

2b - Enable "Unknown Sources" in the Android Auto Dev Options. This will allow the Fermata Media Service to be accessible on your Head Unit, as well as allow the "Auto Play Music on Connect" feature of Android Auto.

3 - Start the Head Unit Server. The 3 Dot Menu in the top right of Android Auto settings will have the option "Start head unit server". You'll see a toast message pop up saying it's starting, and the option should now read "Stop head unit server".

4 - If you're wanting to access your device through the Wireless debug bridge, we need to forward the Head Unit Server socket port to our local system for DHU to access as a local socket:

If you're connecting via USB, this stepp can be stepped!

adb forward tcp:5277 tcp:5277

5 - Start DHU!

# if wireless
~/Android/Sdk/extras/google/auto/desktop-head-unit --bridge

# if usb
~/Android/Sdk/extras/google/auto/desktop-head-unit -u

6 - Launch Fermata FS! This will launch the mirroring app and let you pick the available apps on the "Dashboard"

7 - Disconnect PC (close window if wireless).

8 - Connect to Car, and Fermata FS should launch!

---

Known Issues:

• Pressing any of the Nav Buttons at the bottom of the HUD (such as Maps, etc), or exit the Fermata app (with the included button), and often even just disconnecting will break the process and you will simply need to run DHU and launch Fermata FS again.

• Hitting HOME too many times can sometimes make the buttons permanently disappear, and won't relaunch Fermata Mirror for some reason. I don't do this too often so it's not a big eal.

• YMMV, but screen touch sensitivity/accuracy is not very good for me. Sliding volume doesn't feel very good, if possible in most cases. Various UI interactions don't really work all that well because of this as well (ie, resizing panels in Fermata Auto).

[GoktugUnd]

Hello mate, thank you for detailed explanation. Very much appretiated. I'am on Xiaomi 13T Pro (HyperOS9 Android version 14UP1A
I manage to go through all steps and see all Fermata applications on the AA "Customise Launcher" menu on the phone while I am connected. I don't touch any other app on the "Desktop Head Unit" and just disconnect. As soon as I disconnect all Fermata applications except "Fermata Media Service" gets lost.

I haven't tried connecting to the car yet (in repair service now) but this was the situation when I lost Fermata last week after updating to v1.9 without knowing the issues with Android 14 :-(

Should I not continue to see the Fermata Apps appearing on the "Customise Launcher" menu on AA after I disconnect?

[CodexHere]

I can't pretend to fully understand how it works, but that was the same behavior I got as well. Upon unplugging, the apps will seemingly disappear. With the "Unknown Sources" enabled in AA (not android, but AA), you'll see the Fermata Media Service as an app still, without that you won't and it won't auto-start your music upon pluging in if you have that feature enabled.

It's incredibly flakey right now, and honestly outside of playing music through the media service I don't have much use for it right now. I miss being able to watch videos and use Youtube whenever I wanted, but as often as it crashes and inaccessible my Android Studio is on the road, there's not much I can do about it right now.

Hopefully the dev can figure things out to make it easier for us!

[Zetakidida]

everybody around the world is waiting for a permanent non root solution for A14.

[maripic69]

Чакаме Андрей Павленко да направи нещо,но той идва Android 15!

[jeffreytanuwidjaja]

For rooted devices with Magisk:

• Download the latest LSPosed zygisk module - https://github.com/LSPosed/LSPosed/releases.
• Launch Magisk Manager, go to Modules and install the module.
• Go to settings, enable Zygisk and reboot.
• Install the latest Fermata Auto - https://github.com/AndreyPavlenko/Fermata/releases.
• After the installation, LSPosed should detect a new module.
• Launch the LSPosed manager. If you can't find the launcher, dial *#*#5776733#*#*.
• Go to modules, enable Fermata Auto and restart.

For non-rooted devices:

0. Easy solution - use the AAWireless device and enable dev mode in the device settings.

Duplicating this post by @cosminmocan here:

Been following this thread and saw a few things that kept repeating, and I can only imagine how annoying it must be for people trying to help others and the dev himself, because of that , i will try to make a short summary of the 'possibilities' people have in order to have the video back, also , I will split them in 2 :

2. Main phone, probably with android 14, NOT ROOTED
   Method A: Using DHU connect to your phone, and start fermata FS app, disconnect the phone and voilla , next time you use your phone, your phone will auto start fermata
   BONUS: Use the following command to always allow screen projection to fermata:
   adb shell appops set me.aap.fermata.auto.dear.google.why PROJECT_MEDIA allow
   [Method B]: This works only if your vehicle supports wired android auto, as you will need to BUY a dongle created by another awesome android auto developer, the dongle is called AAWireless. The way this would work is that the dongle acts as a man-in-the-middle and present to the phone as DHU, with developer mode activated, and thaths why you will see all the apps that you usually see with the emulator

3. Secondary phone, can be older, can be extremely cheap if bought second hand with cracked screen.
   Method: You will first need to root this phone, after rooting there are probably more variants of getting it up and running, I will present mine, which is likely outdated but works.

   1. The rooting part will be different for each phone and os version, for this example, the one I used is note9 that i got for free with a 75% working screen
   2. Using king installer I installed the latest fermata auto and control
   3. I have also installed AA AIO TWEAKER
   4. With the Aio Tweaker , i patched fermata to be available in android auto
   5. Open fermata, configure as you need
   6. Go to your car connect this phone, either wired or wireless to be used for android auto
   7. Enjoy fermata
      Bonus: Most cars support multiple phones connected, so you can still connect you main phone for calls, and if you stick a data sim your second phone, you would also be able to have waze running on it.

For me, the the secondary phone method was the only option, as bmw in their infinite wisdom only support wireless android auto, so i keep the phone in my car connected constantly(it only charges when the ignition is on) and everything works wonderful, this also allowed me to have some tasker profiles that send the location of the car every time the usb connection is interrupted via telegram 🗺️

I really hope the above would prevent the same questions from being answered over and over again, and I really hope people will not start making youtube videos again as those only attract bad attention

Hello I follow your steps on rooted device with magisk on Xiaomi 11, but not working, should I install fermata using king installer?

[AndreyPavlenko]

Hello. No, you don't need KingInstaller. Do you see the Fermata Auto module in LSPosed manager? Is it enabled? Are there any log messages from the module?

[IvarKast]

Just a warning for Android 14 Root Users. Update to Android Auto 12.2.

I initially thought that it was not working because I could never see Fermata Auto in the applications. The issue turned out to be that Google Play was only offering an update to version 12.1. After noticing this, I manually updated to version 12.2 by downloading the APK, and it is now functioning properly.

Steps to follow:

1. Install Fermata Auto 1.9.9 without Kingstaller or anything else.
2. Activate the LSPosed module.
3. Restart your phone.

That's all. Thank you very much for the previous information.

[GoktugUnd]

Hi, I need the secondary phone method but connect the car via "Wireless Android Auto". I have and old Samsung S9 Plus phone for this purpose. I don't want to but a new data line but use my company phone's data line. As Wireless AA needs to connect through phone's Wi-Fi module I need to connect the company phone via Bluetooth. But Samsung S9 forces to turn wifi off to be able to connect Bluetooth internet sharing. This is not the case for my primary Android phone. Do any of you have an idea how this can be solved?

[Alejandro2454]

Use netshare app El jue, 4 jul 2024 09:08, GoktugUnd ***@***.***> escribió:

…

Hi, I need the secondary phone method but connect the car via "Wireless Android Auto". I have and old Samsung S9 Plus phone for this purpose. I don't want to but a new data line but use my company phone's data line. As Wireless AA needs to connect through phone's Wi-Fi module I need to connect the company phone via Bluetooth. But Samsung S9 forces to turn wifi off to be able to connect Bluetooth internet sharing. This is not the case for my primary Android phone. Do any of you have an idea how this can be solved? — Reply to this email directly, view it on GitHub <#432 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/APMCG7A3VJKMAVI7YGRUK6DZKVCMTAVCNFSM6AAAAABEM7TTBSVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TSNJZGA2DI> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.*** com>

[GoktugUnd]

On the Samsung S9 or the phone I will connect which is an Iphone...

[GoktugUnd]

Noted... I will look for it through web thank you. But the Samsung will connect to the other phone via Bluetooth and the car via Wi-Fi. So can't understand how Netshare app on Samsung will help solve that. As far I could read at first glance, Netshare is used to set up internet sharing on the Samsung. I need Samsung to connect other devices both at the same time. Am I missing something?

[Alejandro2454]

En el Samsung S9 El jue, 4 jul 2024 10:43, GoktugUnd ***@***.***> escribió:

…

On the Samsung S9 or the phone I will connect which is an Iphone... — Reply to this email directly, view it on GitHub <#432 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/APMCG7CMPB2DAJQO4WLOLLDZKVNSHAVCNFSM6AAAAABEM7TTBSVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TSNJZHEZTG> . You are receiving this because you commented.Message ID: ***@***.***>

[Roscopct]

Buongiorno.. chiedo il vostro aiuto per capire dove inserire la stringa del bonus e ringrazio...

BONUS : utilizza il seguente comando per consentire sempre la proiezione sullo schermo di Fermata:
adb shell appops set me.aap.fermata.auto.dear.google.why PROJECT_MEDIA allow

[DanCasterIt]

Hi, I have an MG ZS car and a Google pixel 6 pro phone with Android 14 (build AP2A.240705.004) and Android Auto 12.2.642414-release.

Even when enabling the developer mode in the AAWireless app, I found no-way to make "Fermata Auto" working correctly. Only the "Fermata Media Service" icon appears instead of four ones on the head-unit screen and if I open it, only a black screen appears and if I play a YouTube video, it just reproduces the audio. I further needed to enable the developer mode on Android Auto to make the app icon appear on the head-unit screen, just enabling developer mode on the AAWireless app wasn't enough. Is there anything I can do to fix the issue?

[SandbarSittin]

Hello, huge fan of this application.

Recently purchased an AAWireless adapter, and have been enjoying it up until a few days ago where the app disappeared. A little over a week ago I updated the Android Auto app to the latest (10.12 I believe), and then lost Fermato Auto from my list. I uninstalled all the updates and manually loaded an older version of the app and it came back. However, it appears that a server-side update was pushed to make Fermata Auto disappear again. I've tried to downgrade again and haven't had any luck. Has anyone else had this issue? Is there something I can do to fix it?

[Cidem5225]

Hello friends, I would like to explain how I run Fermata Mirror on Android 14. I have wireless Android Auto in my car. First of all, you download the Headunit Reloaded application to the phone. After opening the application, you click on self mode. You will see the Android Auto emulator. Then you click on Fermata FS. Then exit the application and install Android in the car. Connect to auto. When connecting, you first give permission from your phone and you will see fermata fs and fermata mirror.

[maripic69]

Какво значи това?. "След това излезте от приложението и инсталирайте Android в колата. "

[ShaDisNX255]

Какво значи това?. "След това излезте от приложението и инсталирайте Android в колата. "

It means exit the application and then start Auto Auto in your car and connect your device.

[Cidem5225]

Sorry for my English. I wanted to say this. Connect to Android Auto in the car. 16 Ağu 2024 Cum 21:17 tarihinde maripic69 ***@***.***> şunu yazdı:

…

Какво значи това?. "След това излезте от приложението и инсталирайте Android в колата. " — Reply to this email directly, view it on GitHub <#432 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BJ7I4BMKDBAXZB637LDAVQ3ZRY637AVCNFSM6AAAAABEM7TTBSVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTAMZWGE4TENQ> . You are receiving this because you commented.Message ID: ***@***.***>

[Carlos1988rm]

Para android 15 hay solución o más de lo mismo?

[netzmark]

@AndreyPavlenko
What am I doing wrong or missed to do.
Xiaomi Mi9, Android11, Rooted, Magisk 25, LSposed1.9.2 module active, Fermata1.9.9 taken from here (no KingInstaller used).
Android Auto 12.9 release currently.
LSposed shows "Fermata Auto - Android Auto hooks".
But, I don't get "Fermata Mirror" or "Fermata FS" apk "icons", "Fermata Auto" only". And the same in AA launcher I can see only "Fermata Media services" aplication possible to choose. In the car, if I run Fermata over AA, there is no visible the "play" switch (the one with triangle". However, if I run some Youtube music on the phone - an audio is transmitted to the car through Fermata.
Should I install something more?

[Carlos1988rm]

Módulo fermata te falta El vie, 1 nov 2024, 14:50, netzmark ***@***.***> escribió:

…

@AndreyPavlenko <https://github.com/AndreyPavlenko> What am I doing wrong or missed to do. Xiaomi Mi9, Android11, Rooted, Magisk 25, LSposed1.9.2 module active, Fermata1.9.9 taken from here (no KingInstaller used). Android Auto 12.9 release currently. LSposed shows "Fermata Auto - Android Auto hooks". But, I don't get "Fermata Mirror" or "Fermata FS" apk "icons", "Fermata Auto" only". And the same in AA launcher I can see only "Fermata Media services" aplication possible to choose. In the car, if I run Fermata over AA, there is no visible the "play" switch (the one with triangle". However, if I run some Youtube music on the phone - an audio is transmitted to the car through Fermata. Should I install something more? — Reply to this email directly, view it on GitHub <#432 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AVYWEOHPQRHDHTSNFTZTXUDZ6OBLDAVCNFSM6AAAAABEM7TTBSVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCMJSGI2DEOA> . You are receiving this because you commented.Message ID: ***@***.***>

[netzmark]

Which module do you mean exactly? There are YT movies showing it working properly under Andr14 even, and with all three sub aplications visible? Should I try with F1.8 so or some other module you mean?

[netzmark]

So finally, after several tries, I've got 5 services available in AA launcher and the only one on the phone visible (blue Fer Auto). An AA:

• Fer Control (almost empty screen after opening)
• Fer Media Services (without Play switch)
• Fer Auto (fully working incl video streamings)
• Fer FS Mirror and Fer Mirror - both doing their job identicaly.
  The last three, Auto and Mirrors, only when connected over AAwireless dev mode. I thought it's only for And14 trick...
  No idea yet how to remove the Control at least - after uninstal the Control is still existing in AA...

[awais-amjed]

I also wanted to post my solution to Android 14 issues, I upgraded from Android 13 and I already had the latest version of Fermata Auto installed in Android 13. Never touched Fermata after upgrading to android 14, and it still works like a charm to this day lol, upgraded in like March of this year.

So maybe just install Android 13, install Fermata Auto using Kinginstaller and just upgrade to Android 14, and never touch the Fermata app lol (Well as long as youtube doesn't break something again).

[netzmark]

Video content of YouTube breaks/freezes for a moment in every several seconds while an audio is very constant. Is it normal due to limited AAwireless band (5GHz anyway)? Or depends on some settings yet? Yes I know that my phone is already relatively old - but it's still quite good Snapdragon855 and 6G of RAM. So it seems to me the phone itself should be not the culprit here.

(There is no higher Android than 11 for my phone).

[Pax97]

Solution Android 14 - OneUI 6.1: Tested on fw G991BXXSDGXI5, Samsung s21

• Install Magisk v28: https://github.com/topjohnwu/Magisk/releases/download/v28.0/Magisk-v28.0.apk
• Enable Zygisk
• Install LSPosed v1.9.3_mod_7244: https://github.com/mywalkb/LSPosed_mod/releases/download/v1.9.3_mod/LSPosed-v1.9.3_mod-7244-riru-release.zip
• Install Fermata v1.9.9: https://github.com/AndreyPavlenko/Fermata/releases/download/1.9.9/fermata-1.9.9-auto-universal-arm64.apk
• Install Let-Me-Downgrade-1.0.5: https://github.com/DavidBerdik/Let-Me-Downgrade/releases/download/1.0.5/Let-Me-Downgrade-1.0.5.apk
• Enable App-Downgrades
• Install Android Auto v12.3.642624
  

[AndreyPavlenko]

Hm, I tested it today with AA 13.1.

[Pax97]

Hm, I tested it today with AA 13.1.

On DHU or Car?

[AndreyPavlenko]

Car

[Pax97]

With the current AA version it works perfectly on the DHU but not with my car. Maybe the reason lies in my car software or Samsung. But with version 12.3 works fine in my case.

[Tanipat]

Android 14 Tab S8 ultra rooted not work as your instruction. Zygisk enable and cannot install riru version module, how you install riru module when zygisk enable?

Update: i use Lsposed 1.93 lastest update. and your method work to just downgrade android auto, anyhow on my porsche it force me to update back to lastest version of android auto. still working after update though Fermata is full function now.

Do you have any work around to make Netflix work. for me only youtube and tv apps work other streaming and netflix show black screen on my car screen. i try browser on Fermata also cannot connect as it request to update browser

[Carlos1988rm]

No, solo funcionará Fermata mirror y a veces no siempre El vie, 15 nov 2024, 11:23, Respect911 ***@***.***> escribió:

…

Following the first path described above, I understand that if I install the emulator on the computer, run the program, disconnect the phone, then when I get in the car and connect the phone, it should work and I will see Fermata in Android Auto too, correct? I have wireless connection in my car, so when I get in the car, Android Auto launches immediately. After downloading the Fermata player from Google Play, I saw the player but Fermata Auto is missing. If I perform all operations described in method one, should everything work? — Reply to this email directly, view it on GitHub <#432 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AVYWEOEV2KYYBOAGC5DD6QD2AXDSNAVCNFSM6AAAAABEM7TTBSVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCMRWGUZDQNQ> . You are receiving this because you commented.Message ID: ***@***.***>

[smok1971]

Dla ukorzenionych urządzeń z Magisk:

* Pobierz najnowszy moduł LSPosed zygisk - https://github.com/LSPosed/LSPosed/releases.

* Uruchom Magisk Manager, przejdź do Moduły i zainstaluj moduł.

* Przejdź do ustawień, włącz Zygisk i ponownie uruchomij.

* Zainstaluj najnowsze Fermata Auto - https://github.com/AndreyPavlenko/Fermata/releases.

* Po instalacji LSPosed powinien wykryć nowy moduł.

* Uruchom menedżera LSPosed. Jeśli nie możesz znaleźć wyrzutni, wybierz `*#*#5776733#*#*`..

* Przejdź do modułów, włącz Fermata Auto i ponownie uruchomij.

Dla nieukorzenionych urządzeń:

0. Easy solution - użyj urządzenia [AAWireless](https://www.aawireless.io/) i włącz tryb dev w ustawieniach urządzenia.

Duplikowanie tego postu przez .cosminmocan tutaj:

Poszkopałem ten wątek i zobaczyłem kilka rzeczy, które powtarzały się, i mogę sobie tylko wyobrazić, jak irytujące musi być, jeśli ludzie próbują pomóc innym i samemu sobie, z tego powodu, spróbuję zrobić krótkie podsumowanie "możliwości" ludzi, aby mieć wideo, również rozdzielę je w 2:

2. Telefon główny, prawdopodobnie z Androidem 14, nie ROOTED
   [Metoda A:](https://github.com/AndreyPavlenko/Fermata/issues/327#issuecomment-1916776751) Korzystając z [połączenia DHU](https://developer.android.com/training/cars/testing/dhu) z telefonem i uruchom aplikację fermata FS, odłącz telefon i voilla, następnym razem, gdy użyje telefonu, telefon automatycznie uruchomi fermatę
   [BONUS:](https://github.com/AndreyPavlenko/Fermata/issues/327#issuecomment-1918036233) Użyj następującego polecenia, aby zawsze zezwolić na projekcję ekranu do fermata:
   `adb shell appops set me.aap.fermata.auto.dear.google.why PROJECT_MEDIA allow`
   [[Method B]](https://github.com/AndreyPavlenko/Fermata/issues/327#issuecomment-1924189144): Działa to tylko wtedy, gdy pojazd obsługuje przewodowy samochód z Androidem, ponieważ musisz skłonić klucz stworzony przez innego niesamowitego programistę samochodu z Androidem, klucz do jest nazywany [AAWireless](https://www.aawireless.io/). Sposób, w jaki to działa, polega na tym, że klucz do pracy działa jak człowiek w środku i obecny dla telefonu jako DHU, z aktywowanym trybem programisty i dlatego zobaczysz wszystkie aplikacje, które zwykle widzisz za pomocą emulatora

3. Telefon wtórny, może być starszy, może być bardzo tani, jeśli kupiony z drugiej ręki z pękniętym ekranem.
   Metoda: Najpierw będziesz musiał zakorzenić ten telefon, po zakorzenieniu prawdopodobnie jest więcej wariantów jego uruchamiania, zaprezentuję swoje, co prawdopodobnie jest przestarzały, ale działa.
   
   1. Część rootingowa będzie inna dla każdego telefonu i wersji os, na tym przykładzie ta, której użyłem, to notatka9, którą dostałem za darmo z 75% pracującym ekranem
   2. Za pomocą instalatora king zainstalowałem najnowszą auto i kontrolę fermatmaty
   3. Zainstalowałem również [AA AIO TWEAKER](https://github.com/shmykelsa/AA-Tweaker)
   4. Dzięki Aio Tweaker , załatałem fermatę, aby być dostępnym w auto android
   5. Otwórz fermata, skonfiguruj w razie potrzeby
   6. Przejdź do samochodu podłącz ten telefon, przewodowy lub bezprzewodowy, aby być używany do samochodu Android
   7. Ciesz się fermatą
      Bonus: Większość samochodów obsługuje wiele podłączonych telefonów, dzięki czemu nadal możesz podłączyć główny telefon do połączeń, a jeśli przykleisz dane do drugiego telefonu, będziesz mógł również mieć na nim waze.

Dla mnie metoda telefonu wtórna była jedyną opcją, ponieważ bmw w ich nieskończonej mądrości obsługuje tylko bezprzewodowy samochód z Androidem, więc trzymam telefon w moim samochodzie stale podłączonym (na ładuje się tylko, gdy zapłon jest włączona) i wszystko działa wspaniale, to również pozwoliło mi mieć kilka profili tasker, które wysyłają lokalizację samochodu za każdym razem, gdy połączenie usb jest przerywane za pomocą telegramu.
without root, Android 14 phone,
Method A: Using a DHU connection, it works wired and wirelessly, but the screen on the car's display is smaller, how to enlarge it to fill the entire infotainment screen

Dla ukorzenionych urządzeń z Magisk:

* Pobierz najnowszy moduł LSPosed zygisk - https://github.com/LSPosed/LSPosed/releases.

* Uruchom Magisk Manager, przejdź do Moduły i zainstaluj moduł.

* Przejdź do ustawień, włącz Zygisk i ponownie uruchomij.

* Zainstaluj najnowsze Fermata Auto - https://github.com/AndreyPavlenko/Fermata/releases.

* Po instalacji LSPosed powinien wykryć nowy moduł.

* Uruchom menedżera LSPosed. Jeśli nie możesz znaleźć wyrzutni, wybierz `*#*#5776733#*#*`..

* Przejdź do modułów, włącz Fermata Auto i ponownie uruchomij.

Dla nieukorzenionych urządzeń:

0. Easy solution - użyj urządzenia [AAWireless](https://www.aawireless.io/) i włącz tryb dev w ustawieniach urządzenia.

Duplikowanie tego postu przez .cosminmocan tutaj:

Poszkopałem ten wątek i zobaczyłem kilka rzeczy, które powtarzały się, i mogę sobie tylko wyobrazić, jak irytujące musi być, jeśli ludzie próbują pomóc innym i samemu sobie, z tego powodu, spróbuję zrobić krótkie podsumowanie "możliwości" ludzi, aby mieć wideo, również rozdzielę je w 2:

2. Telefon główny, prawdopodobnie z Androidem 14, nie ROOTED
   [Metoda A:](https://github.com/AndreyPavlenko/Fermata/issues/327#issuecomment-1916776751) Korzystając z [połączenia DHU](https://developer.android.com/training/cars/testing/dhu) z telefonem i uruchom aplikację fermata FS, odłącz telefon i voilla, następnym razem, gdy użyje telefonu, telefon automatycznie uruchomi fermatę
   [BONUS:](https://github.com/AndreyPavlenko/Fermata/issues/327#issuecomment-1918036233) Użyj następującego polecenia, aby zawsze zezwolić na projekcję ekranu do fermata:
   `adb shell appops set me.aap.fermata.auto.dear.google.why PROJECT_MEDIA allow`
   [[Method B]](https://github.com/AndreyPavlenko/Fermata/issues/327#issuecomment-1924189144): Działa to tylko wtedy, gdy pojazd obsługuje przewodowy samochód z Androidem, ponieważ musisz skłonić klucz stworzony przez innego niesamowitego programistę samochodu z Androidem, klucz do jest nazywany [AAWireless](https://www.aawireless.io/). Sposób, w jaki to działa, polega na tym, że klucz do pracy działa jak człowiek w środku i obecny dla telefonu jako DHU, z aktywowanym trybem programisty i dlatego zobaczysz wszystkie aplikacje, które zwykle widzisz za pomocą emulatora

3. Telefon wtórny, może być starszy, może być bardzo tani, jeśli kupiony z drugiej ręki z pękniętym ekranem.
   Metoda: Najpierw będziesz musiał zakorzenić ten telefon, po zakorzenieniu prawdopodobnie jest więcej wariantów jego uruchamiania, zaprezentuję swoje, co prawdopodobnie jest przestarzały, ale działa.
   
   1. Część rootingowa będzie inna dla każdego telefonu i wersji os, na tym przykładzie ta, której użyłem, to notatka9, którą dostałem za darmo z 75% pracującym ekranem
   2. Za pomocą instalatora king zainstalowałem najnowszą auto i kontrolę fermatmaty
   3. Zainstalowałem również [AA AIO TWEAKER](https://github.com/shmykelsa/AA-Tweaker)
   4. Dzięki Aio Tweaker , załatałem fermatę, aby być dostępnym w auto android
   5. Otwórz fermata, skonfiguruj w razie potrzeby
   6. Przejdź do samochodu podłącz ten telefon, przewodowy lub bezprzewodowy, aby być używany do samochodu Android
   7. Ciesz się fermatą
      Bonus: Większość samochodów obsługuje wiele podłączonych telefonów, dzięki czemu nadal możesz podłączyć główny telefon do połączeń, a jeśli przykleisz dane do drugiego telefonu, będziesz mógł również mieć na nim waze.

Dla mnie metoda telefonu wtórna była jedyną opcją, ponieważ bmw w ich nieskończonej mądrości obsługuje tylko bezprzewodowy samochód z Androidem, więc trzymam telefon w moim samochodzie stale podłączonym (na ładuje się tylko, gdy zapłon jest włączona) i wszystko działa wspaniale, to również pozwoliło mi mieć kilka profili tasker, które wysyłają lokalizację samochodu za każdym razem, gdy połączenie usb jest przerywane za pomocą telegramu.

Naprawdę mam nadzieję, że powyższe zapobiegnie rozpatrzeniu tych samych pytań w kółko i naprawdę mam nadzieję, że ludzie nie zaczną ponownie robić filmów z YouTube, ponieważ te tylko przyciągają złą uwagę.

For rooted devices with Magisk:

* Download the latest LSPosed zygisk module - https://github.com/LSPosed/LSPosed/releases.

* Launch Magisk Manager, go to Modules and install the module.

* Go to settings, enable Zygisk and reboot.

* Install the latest Fermata Auto - https://github.com/AndreyPavlenko/Fermata/releases.

* After the installation, LSPosed should detect a new module.

* Launch the LSPosed manager. If you can't find the launcher, dial `*#*#5776733#*#*`.

* Go to modules, enable Fermata Auto and restart.

For non-rooted devices:

0. Easy solution - use the [AAWireless](https://www.aawireless.io/) device and enable dev mode in the device settings.

Duplicating this post by @cosminmocan here:

Been following this thread and saw a few things that kept repeating, and I can only imagine how annoying it must be for people trying to help others and the dev himself, because of that , i will try to make a short summary of the 'possibilities' people have in order to have the video back, also , I will split them in 2 :

2. Main phone, probably with android 14, NOT ROOTED
   [Method A](https://github.com/AndreyPavlenko/Fermata/issues/327#issuecomment-1916776751): Using [DHU](https://developer.android.com/training/cars/testing/dhu) connect to your phone, and start fermata FS app, disconnect the phone and voilla , next time you use your phone, your phone will auto start fermata
   [BONUS](https://github.com/AndreyPavlenko/Fermata/issues/327#issuecomment-1918036233): Use the following command to always allow screen projection to fermata:
   `adb shell appops set me.aap.fermata.auto.dear.google.why PROJECT_MEDIA allow`
   [[Method B]](https://github.com/AndreyPavlenko/Fermata/issues/327#issuecomment-1924189144): This works only if your vehicle supports wired android auto, as you will need to BUY a dongle created by another awesome android auto developer, the dongle is called [AAWireless](https://www.aawireless.io/). The way this would work is that the dongle acts as a man-in-the-middle and present to the phone as DHU, with developer mode activated, and thaths why you will see all the apps that you usually see with the emulator

3. Secondary phone, can be older, can be extremely cheap if bought second hand with cracked screen.
   Method: You will first need to root this phone, after rooting there are probably more variants of getting it up and running, I will present mine, which is likely outdated but works.
   
   1. The rooting part will be different for each phone and os version, for this example, the one I used is note9 that i got for free with a 75% working screen
   2. Using king installer I installed the latest fermata auto and control
   3. I have also installed [AA AIO TWEAKER ](https://github.com/shmykelsa/AA-Tweaker)
   4. With the Aio Tweaker , i patched fermata to be available  in android auto
   5. Open fermata, configure as you need
   6. Go to your car connect this phone, either wired or wireless to be used for android auto
   7. Enjoy fermata
      Bonus: Most cars support multiple phones connected, so you can still connect you main phone for calls, and if you stick a data sim your second phone, you would also be able to have waze running on it.

For me, the the secondary phone method was the only option, as bmw in their infinite wisdom only support wireless android auto, so i keep the phone in my car connected constantly(it only charges when the ignition is on) and everything works wonderful, this also allowed me to have some tasker profiles that send the location of the car every time the usb connection is interrupted via telegram 🗺️

I really hope the above would prevent the same questions from being answered over and over again, and I really hope people will not start making youtube videos again as those only attract bad attention

without root, Android 14 phone,
Method A: Using a DHU connection, it works wired and wirelessly, but the screen on the car's display is smaller, how to enlarge it to fill the entire infotainment screen

[smok1971]

without root, Android 14 phone,
Method A: Using a DHU connection, it works wired and wirelessly, but the screen on the car's display is smaller, how to enlarge it to fill the entire infotainment screen

[Venomas200]

Hi today inwas received AAWIRELESS. And here a problems, my car BMW support wireless AA, and I cannot connect dongle with my car. Any solutions, phone S23 Ultra now im running on Android 13 but when I go to A14 what's I can do?

[Tanipat]

I have rooted S8 Tab ultra work full function for Fermata now. I want to know, when screen mirroring i want my tablet to not dim screen. I know it is set to dim in 30 seconds but i want option not to dim as well, where can i set this? Thanks

[AndreyPavlenko]

Currently there is no setting for this, 30 sec is hardcoded.