Request Failed with status 401 - Unauthorized Error

[mattfox27]

Getting this Request Failed with status 401 - Unauthorized error?

[BigThunderSR]

This will need to be addressed in the OnStarJS library, so I have opened samrum/OnStarJS#255 in that project.

[BigThunderSR]

The fix from @nilathedragon worked. Thanks much!!!

[mattfox27]

The fix from @nilathedragon worked. Thanks much!!!

whats the fix?

[almoney]

Thank you for working this!

[BigThunderSR]

The fix from @nilathedragon worked. Thanks much!!!

whats the fix?

The fix is in
samrum/OnStarJS#256 which I implemented in the embedded OnStarJS version of this onstar2mqtt version.

[aminorjourney]

Heck yes @nilathedragon - Furries (and Scalies) saving the world again :)

Note to those having issues: I found I had to regenerate my UUID for everything to update, but that might have just been coincidental. I wasn't getting any polling from OnStar until I regenerated the UUID, now it's working perfectly!

[Maliron]

I am getting "Request Failed with status 403 - Forbidden" when trying to send a command. I even tried using a new UUID, any ideas?

[BigThunderSR]

I am getting "Request Failed with status 403 - Forbidden" when trying to send a command. I even tried using a new UUID, any ideas?

This usually happens when there's a typo in the VIN. Have you double checked your VIN for accuracy? Also, make sure you log into the official GM app and make sure your login works there as well.

[Maliron]

Well, go figure. Turns out my remote access expired yesterday and didn't auto renew. That would do it. Lol! Thanks. Seriously considering making my own "cloud" connection that talks to the CANBUS. I imagine a cheap LTE SIM is cheaper than $150 a year. Wouldn't have to fight the API anymore whenever they roll the app ID too.On Jul 26, 2024 4:31 PM, BigThunderSR ***@***.***> wrote: I am getting "Request Failed with status 403 - Forbidden" when trying to send a command. I even tried using a new UUID, any ideas? This usually happens when there's a typo in the VIN. Have you double checked your VIN for accuracy? Also, make sure you log into the official GM app and make sure your login works there as well. —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: ***@***.***>

[aminorjourney]

There’s a project called OVMS openvehicles/Open-Vehicle-Monitoring-System-3#704

Development for Bolt EV is there, albeit limited. It does not use OnStar.

That said, THIS project here is super important because not everyone is happy adding hardware and will happily use OnStar as long as it works… however long that may or may not be ;)

[Maliron]

I'm all over this. Thanks!On Jul 26, 2024 10:21 PM, Aminorjourney ***@***.***> wrote: There’s a project called OVMS openvehicles/Open-Vehicle-Monitoring-System-3#704 Development for Bolt EV is there, albeit limited. It does not use OnStar. —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: ***@***.***>