Can't validate/install EPS Home

[pkacp1]

Hi team,

Can you please help me to find a solution for this? when I try to install ESP on new NS Panel ESP Home gives me this error while validating yaml:

`INFO Reading configuration /config/esphome/nspanel-3.yaml...
INFO Updating https://github.com/Blackymas/NSPanel_HA_Blueprint@main
WARNING GPIO4 is a Strapping PIN and should be avoided.
Attaching external pullup/down resistors to strapping pins can cause unexpected failures.
See https://esphome.io/guides/faq.html#why-am-i-getting-a-warning-about-strapping-pins
Failed config

esphome: None
  name: nspanel_3
  
  [min_version] is an invalid option for [esphome]. Please check the indentation.
  min_version: 2022.10.2 None
  build_path: .esphome/build/nspanel_3
script: [source /config/esphome/.esphome/packages/566b10a3/nspanel_esphome.yaml:977]
  
  'id' is a required option for [script].
  - [source /config/esphome/.esphome/packages/566b10a3/nspanel_esphome.yaml:977]
    
    Unable to find action with the name 'id'.
    id: page_timer [source /config/esphome/.esphome/packages/566b10a3/nspanel_esphome.yaml:977]
    mode: restart
    parameters: 
      delay: int
    then: 
      - lambda: ESP_LOGD("nspanel", "start page-timer delay %i", int(id(page_timeout).state));
      - delay: !lambda |-
          return delay *1000;
      - lambda: |-
          if (id(disp1_currentpage).state == "home" or id(disp1_currentpage).state == "screensaver" or id(disp1_currentpage).state == "boot" or int(id(page_timeout).state) == 0) {
            ESP_LOGD("nspanel", "no page-jump");
          } else {
            ESP_LOGD("nspanel", "timer->home");
            id(disp1).send_command_printf("page 0");
          }`

Any ideas what's wrong?

[pkacp1]

I was old version of ESP Home ;)