General configuration questions.

[cr4shydlo]

I have a few questions.

How can I create a control panel for LEDs (color, brightness, etc.) - I have an entity from WLED, but when I select it, I can only turn the LEDs on/off.
How can I use one of the 2 buttons as a relay? The left button should turn on the LEDs, which works, but I want the right button to always trigger the relay, not just when there is no connection with HA.
How can I adjust the internal temperature sensor of the display?
Thanks for your help.

[cr4shydlo]

"1. It seems to me that I also know how to do it, you need to press and hold to open the color configuration. Is it possible to add this setting to the main panel so I don't have to hold it down? And can I set the color of the lamp icon to match the color of the LEDs?"
"2. I already have it figured out, I'll just set the entity to NS2 relay. And if there's no connection, it will still work anyway."

[edwardtfn]

Under the device page (Settings > Devices & Services > ESPHome) you have a slider connected to the temperature compensation for that sensor.