Home
Minino features different modules that can take advantage of them to perform security analysis and audit workflows. Additionally, you can use their I2C, UART, and digital pins to retrieve data from any other external modules.
Minino is an outstanding tool where you can visualize and navigate through the menus with the buttons on the board. Additionally, Minino is portable and there is no need to be connected through USB to work (can be powered by 3xAAA batteries).
Minino's features utilize the ESP32's and the GPS module's (ATGM336H) capabilities for network security testing to identify and address vulnerabilities, especially on Wi-Fi networks.
Minino has a preloaded firmware that includes the features described in this wiki. However, you can build your own firmware using the ESP-IDF framework or Arduino. However, we will focus on the ESP-IDF framework in this guide.
Compatible with CatSniffer's PyCatSniffer and Wireshark, reading the sniffed data is easier than ever.
Important
The microcontroller on this board runs at 3.3V, which means that you must never apply more than 3.3V to its Digital and Analog pins.
| Board | |||
|---|---|---|---|
| Name | Minino | ||
| Microcontroller | |||
| ESP32-C6 | |||
| USB connector | |||
| USB-C | |||
| Pins | |||
| Digital I/O Pins | 1 (D11) | ||
| Connectivity | |||
| WiFi | ESP32-C6-WROOM-1 ESPRESSIF module | ||
| GPS | ATGM336H Zhongkewei module | ||
| Communication | |||
| UART | Yes | ||
| I2C | Yes | ||
| Power | |||
| I/O Voltage | 3.3V | ||
| Supported battery | 3xAAA, holder included | ||
| Clock speed | |||
| Main Processor | ESP32-C6 up to 160 MHz | ||
| Memory | |||
| ESP32-C6 | 512KB HP SRAM | ||
| Dimensions | |||
| Width | 82.5 mm | ||
| Length | 110 mm | ||
| CAD Files |
Thank you for reading our Wiki!