plugins.yaml

SampleActor:
  description: A sample Actor for CraftBeerPi
  api: 3.0
  author: CraftBeerPi
  repo_url: https://github.com/craftbeerpi/sample_actor

AmazonAlexaPlugin:
  description: Amazon Alexa Plugin. Control CraftBeerPi via Alexa Skill. See https://github.com/craftbeerpi/alexa for installation instructions
  api: 3.0
  author: CraftBeerPi
  repo_url: https://github.com/craftbeerpi/alexa.git

AlarmClock:
  description: Pause process until a set time, e.g. set up night before to brew in the morning.
  api: 3.0
  author: Christopher Speck
  repo_url: https://github.com/cgspeck/cbpi-alarm-clock.git

HTTPSensor:
  description: HTTP Sensor Endpoint for CraftBeerPi to allow other service to push data via HTTP to CraftBeerPi
  api: 3.0
  author: CraftBeerPi
  repo_url: https://github.com/craftbeerpi/http_sensor.git

PIDArduino:
  description: PID Logic proted from Arduino. 
  api: 3.0
  author: CraftBeerPi
  repo_url: https://github.com/Manuel83/cbpi-PIDArduino.git  

PIDFermentationChamber:
  description: PID for Fermentation
  api: 3.0
  author: Carl Allen
  repo_url: https://github.com/carlallen/cbpi_PIDFermentationChamber

InvertPWM:
  description: Inverted Acgtor PWM
  api: 3.0
  author: Christopher Seesser
  repo_url: https://github.com/seesser/InvertPWM

SimpleBoilLogic:
  description: Simple logic to set the heater power setting during the ramp up period and then have it scaled back to a boiling power setting.
  api: 3.0
  author: Luke Mullan
  repo_url: https://github.com/jalim/SimpleBoilLogic.git

BlynkConnector:
  description: Connect your brewing controller to Blynk App - www.Blynk.cc
  api: 3.0
  author: Joe Alloway
  repo_url: https://github.com/IndyJoeA/cbpi_BlynkPlugin.git

WIFISocketActor:
  description: Connect Edimax wifi socket to CraftBeerPi
  api: 3.0
  author: CraftBeerPi
  repo_url: https://github.com/Manuel83/cbpi-WIFISocket.git
  
GembirdUSBActor:
  description: Connect Gembird USB socket to CraftBeerPi. Please read the documentation. Run 'apt-get install sispmctl' in a terminal window to install the missing libs.
  api: 3.0
  author: CraftBeerPi
  repo_url: https://github.com/Manuel83/cbpi-GembridUSB.git

Mod_PWM:
  description: This is an add on for the CraftBeerPi 3 that is a modded form of the GPIOPWM. This Pugin makes it possible to run the Mod_PWM_Logic that adds power reduction and power ramp up to the GPIOPWM actor. Please set you heater actor the Mod_PWM and your kettle logic to Mod_PWM_Logic.
  api: 3.0
  author: Christopher Seesser
  repo_url: https://github.com/seesser/Mod_PWM.git

IFTTT-Notification:
  description: IFTTT Push Notifications for Craftbeerpi
  api: 3.0
  author:  Luke Mullan
  repo_url: https://github.com/jalim/IFTTT-Notifications.git
  
Flowmeter:
  description: Flowmeter support for CraftBeerpi
  api: 3.0
  author:  Ola Wallin
  repo_url: https://github.com/nanab/Flowmeter.git  

iSpindel:
  description: iSpindel Hydrometer support. https://github.com/universam1/iSpindel
  api: 3.0
  author: Joe Alloway
  repo_url: https://github.com/IndyJoeA/cbpi_iSpindel.git

Socket433MHz:
  description: BETA - 433MHz Socket Actor Plugin. Switch 433MHz sockets
  api: 3.0
  author: CraftBeerPi
  repo_url: https://github.com/Manuel83/cbpi-socket433mhz.git

PiFaceActor:
  description: BETA - PiFace Support
  api: 3.0
  author: CraftBeerPi
  repo_url: https://github.com/Manuel83/cbpi-pifaceactor.git
 
HendiControl:
  description: Hendi Induction Cooker Controller
  api: 3.0
  author: Anders Holmström
  repo_url: https://github.com/AHm74/hendictrl.git

PIDAutoTune:
  description: PIDAutoTune Plugin to find the pefect PID Parameters
  api: 3.0
  author: Joe Alloway
  repo_url: https://github.com/IndyJoeA/cbpi_PIDAutoTune.git

PushoverNotification:
  description: Forward notifications to Pushover
  api: 3.0
  author: Luke Mullan
  repo_url: https://github.com/jalim/cbpi-Pushover.git

GPIOCompressor:
  description: This plugin adds Actors for controlling compressors (like refridgerators/freezers). To prevent damage to the compressor, you should not turn the compressor on and off repeatedly. It's best to have a delay between cycles. This actor allows for that delay
  api: 3.0
  author: Carl Allen
  repo_url: https://github.com/carlallen/cbpi_GPIOCompressor.git  

PT100Sensor:
  description: This is a simple sensor for craftbeerpi which uses a max31865 chip to run pt100 probes.
  api: 3.0
  author: Joe Pearce
  repo_url: https://github.com/thegreathoe/cbpi-pt100-sensor.git
  
LCDDisplay:
  description: With this add-on you can display your Brewing steps temperatures on a 20x4 i2c LCD Display. The script will loop thru your kettles or fermenters and display the target and current temperatur. If no brewing process is running it will show Brewery name, IP address and Date/Time
  api: 3.0
  author: Jan Battermann and Remo Breitenmoser
  repo_url: https://github.com/JamFfm/craftbeerpiLCD.git
  
AdvancedOvershootKettleLogic:
  description: Advanced Overshoot Logic 
  api: 3.0
  author: CraftBeerPi
  repo_url: https://github.com/Manuel83/cbpi-overshoot-advanced.git 

ToggleStep:
  description: This is a very simple plugin that adds a Step to CraftBeerPi called ToggleStep. This step will turn on, turn off, or set the power on any actor, and then immediately continue with the next step. This is useful if you have a need to turn something on like a pump, but then continue execution of other steps without turning that device back off. Or you could turn something on and set the power, and then use another ToggleStep later to turn it back off.
  api: 3.0
  author: Joe Alloway
  repo_url: https://github.com/IndyJoeA/cbpi_ToggleStep.git

PIDBoil:
  description: If the target Temperature is above a confgurable threshold the PID will be ignord and heater is swtiched on constandtly. This is helpflul if you use the same kettle for mashing and boiling
  api: 3.0
  author: CraftBeerPi
  repo_url: https://github.com/Manuel83/cbpi-pidboil.git

Groups:
  description: With this plugin you can create both Actor Groups and Sensor Groups. When you group actors together, a single group will turn on, turn off, or set power on all actors at the same time. When you group sensors together, a single group will show the average of the sensors within that group. You can even create groups where the members of that group are other groups.
  api: 3.0
  author: Joe Alloway
  repo_url: https://github.com/IndyJoeA/cbpi_Groups.git

HTTPActor:
  description: The HTTPActor plugin allows CraftBeerPi to send commands to any device that accepts HTTP requests so that devices can be controlled remotely. It can be configured to communicate with any device where the HTTP API is known, whether local or internet based.
  api: 3.0
  author: Joe Alloway
  repo_url: https://github.com/IndyJoeA/cbpi_HTTPActor.git

TiltHydrometerPlugin:
  description: Allows your Tilt digital hydrometer to send data to CraftBeerPi 3.0, such as the current temperature and gravity readings. The plugin allows you to create multiple sensors, each of which is associated with a different data type that the Tilt is capturing, so that you can use these sensors as you would any other sensor in CraftBeerPi. You can also use multiple Tilt devices for different fermentation chambers at the same time. See below for setup instructions and some screenshots of the configuration options.
  api: 3.0
  author: Joe Alloway
  repo_url: https://github.com/IndyJoeA/cbpi_Tilt.git

SystemTemp:
  description: This adds a new sensor type SystemTemp sensor which reports the system temp from your raspberry pi
  api: 3.0
  author: Carl Allen
  repo_url: https://github.com/carlallen/cbpi_SystemTemp.git

SwitchSensorMashStep:
  description: This is a very simple plugin that adds a second temperature sensor to the MashStep. This step set the kettle temperature based on the sensor previously assigned to the kettle and turn on a secondary actor (ex. pump, etc.). Then the step timer will not start until the secondary sensor value is equal to the kettle sensor value. This is would be useful for a HERMES or similiar system in which you are not directly heating your mash or you are not directly heating your mash with a high-powered heat source.
  api: 3.0
  author: Ian Colville
  repo_url: https://github.com/swimIan/SwitchSensorMashStep.git

GPIOSystem:
  description: This plugin writes to native system files to control GPIO output (rather than relying on RPi.GPIO), allowing it to be used on non-Pi based setups.
  api: 3.0
  author: Peter Marinec
  repo_url: https://github.com/chiefwigms/GPIOSystem.git

MQTTPlugin:
  description: This plugins allows to connect to an MQTT Message broker to receive sensor data and invoke actors. Please see github how to install additional missing libs
  api: 3.0
  author: CraftBeerPi
  repo_url: https://github.com/Manuel83/cbpi-mqtt.git

HTTPAuth:
  description: This plugin password protects your entire CraftBeerPi installation. This is a must have if you want to make your installation globally accessible.
  api: 3.0
  author: Carl Allen
  repo_url: https://github.com/carlallen/cbpi_HTTPAuth.git

OWFSTemperaturePlugin:
  description: temperature plugin for cbpi. Using owfs.
  api: 3.0
  author: Co de Waal
  repo_url: https://github.com/cow77/cbpi_owfs_Temp.git

BrewPi_SSR:
  description: This is the code for a BrewPi plugin for the CraftBeerPi brewing/fermentation controller to make it possible to use BrewPi SSR's. This are 1-wire based SSR-controllers. Normally connected using the "w1-" file based 1-wire software of the pi, but also by connecting using a i2c-hub (The 1 Wire Pi Plus from AB Electronics UK). This creates a more reliable 1-wire infrastructure incase a larger network is needed. It then use owfs and pyowfs.
  api: 3.0
  author: Co de Waal
  repo_url: https://github.com/cow77/cbpi_BrewPi_SSR.git

BrewPi_Valve:
  description: This is the code for a BrewPi Valve-controller plugin for the CraftBeerPi brewing/fermentation controller to make it possible to use BrewPi Valves.
  api: 3.0
  author: Co de Waal
  repo_url: https://github.com/cow77/cbpi_BrewPi_Valve.git

HTTPActor_CompressorDelay:
  description: The HTTPActor with Compressor Delay plugin allows CraftBeerPi to send commands to any device that accepts HTTP requests so that devices can be controlled remotely, and can be configured with a delay timer. It can be configured to communicate with any device where the HTTP API is known, whether local or internet based. The delay ensures that you can use this with Wifi sockets connected to compressor based cooling devices.
  api: 3.0
  author: Daniel McInteer
  repo_url: https://github.com/wgtndan/cbpi_HTTPActor_CompressorDelay.git

OneWireWithFilter:
  description: This is basically the default one wire senore plugin but with two additional config parameter to filter wrong values
  api: 3.0
  author: CraftBeerPi
  repo_url: https://github.com/Manuel83/cbpi-onewire-with-filter.git

TPLinkPlugin:
  description: The TPLinkPlugin allows CraftBeerPi to use the TPLink Wi-Fi Smart Plugs
  api: 3.0
  author: Atle Ravndal
  repo_url: https://github.com/aravndal/TPLinkPlug.git
  
AdafruitDHT_Plugin:
  description: AdafruitDHT Plugin for combind humidity and temperature sensor
  api: 3.0
  author: Manuel Fritsch 
  repo_url: https://github.com/Manuel83/cbpi-Adafruit_DHT.git  

ThingSpeak:
  description: The ThingSpeak Plugin allows CraftBeerPi 3.0 to send sensor data to ThingSpeak.com
  api: 3.0
  author: Atle Ravndal
  repo_url: https://github.com/aravndal/ThingSpeak.git

TimedAgitator:
  description: This simple plugin allows you to switch on and off a agitator by timer. 
  api: 3.0
  author: Miracel Vip
  repo_url: https://github.com/MiracelVip/cbpi-TimedAgitator.git

Silvercrest433Mhz:
  description: This is an actor plugin for CraftbeerPi 3.0, which aims to provide a way to switch radio sockets on and off. Right now there is only one supported set, the silvercrest RCP DP3 3711-A.
  api: 3.0
  author: Clemens Krack
  repo_url: https://github.com/ckrack/cbpi-433silvercrest.git

BoilStepWithCountdownTimers:
  description: Boil step with hop additions that countdown to end of boil plus extra reminders (e.g prep yeast, prep fermenter, etc).
  api: 3.0
  author: Christopher Speck
  repo_url: https://github.com/cgspeck/cbpi-boilstep-with-countdown.git

BoilStepWithHopDroper:
  description: A custom boil step with hop dropper
  api: 3.0
  author: CraftBeerPi
  repo_url: https://github.com/Manuel83/cbpi-boil-hopdropper.git

DependentActor:
  description: This CraftBeerPi 3.0 plugin provides a new actor type called DependentActor. DependentActors are containers for existing Base Actors, which will only power ON if their Actor Dependency is in the correct state. The Actor Dependency must be ON if it is set as a prerequisite, and OFF if it is set as a restriction.
  api: 3.0
  author: Justin Angevaare
  repo_url: https://github.com/jangevaare/cbpi-DependentActor.git

CascadePID:
  description: This CraftBeerPi 3.0 plugin provides a new KettleController type called CascadePID. The main purpose of this plugin is for sophisticated mash temperature control within popular RIMS and HERMS-based breweries, however it may have additional purposes.
  api: 3.0
  author: Justin Angevaare
  repo_url: https://github.com/jangevaare/cbpi-CascadePID.git

OneWireAdvanced:
  description: "This CraftBeerPi 3.0 plugin provides a new sensor type called OneWireAdvanced. This plugin attempts to provide even more control over DS18B20 temperature readings in CraftBeerPi. It allows setting of: sensor bias, sensor precision, exponential moving average, low and high value filters, update interval, and alert options."
  api: 3.0
  author: Justin Angevaare
  repo_url: https://github.com/jangevaare/cbpi-OneWireAdvanced.git
  
OnAtStartup:
  description: This CraftBeerPi 3.0 plugin turns the selected actor on with it's initialization with a specified power level. Nothing more, nothing less. It is intended to be hidden from the dashboard. May be used to automatically turn on a panel fan controlled by a GPIO, for instance.
  api: 3.0
  author: Justin Angevaare
  repo_url: https://github.com/jangevaare/cbpi-OnAtStartup.git

PIDSmartBoilWithPump:
  description: This plugin uses the PID alogrithm during mash phase, then once boiling temperature is called for 100% power, and once a boiling threshold is reached scales down to a configurable value. This plugin also controls the pump for you automatically, running the pump during mash with configurable rests, then running the pump during boil ramp up until a configurable threshold is reached.
  api: 3.0
  author: Christopher Speck
  repo_url: https://github.com/cgspeck/cbpi-pidsmartboil-withpump.git

TFTDisplay:
  description: With this add-on you can display a temperature graph of a kettle (its sensor) or of a fermenter on a 240 x 320 TFT SPI display. It is based on the ILI9341 controller.
  api: 3.0
  author: Jan Battermann
  repo_url: https://github.com/JamFfm/TFTDisplay.git
  
Generic433MHzSocket:
  description: Controls generic 433MHz sockets with flexible configuration 
  api: 3.0
  author: Filipe Matos
  repo_url: https://github.com/filipematos95/cbpi-generic-socket433

CBPi-Wii:
  description: This plugin extends the CraftBeerPi software by a sensor in order to monitor weight changes (KG/LBS) using a Nintento Wii Balance Board. 
  api: 3.0
  author: Frederick-Claud Dimmer
  repo_url: https://github.com/peakMeissner/cbpi-Wii
  
PHMeasure:
  description: With this add-on you can display pH values and the coresponding voltage via a MCP3008 analog/digital converter
  api: 3.0
  author: Jan Battermann
  repo_url: https://github.com/JamFfm/PHMeasure.git

GlycolChillerController:
  description: GlycolChillerController which just controls a chiller. 
  api: 3.0
  author: CraftBeerPi
  repo_url: https://github.com/Manuel83/glycol_chiller_controller.git

DynDns:
  description: DynDns
  api: 3.0
  author: MiracelVip
  repo_url: https://github.com/MiracelVip/cbpi-DynDns.git

ExtendedMenu:
  description: ExtendedMenu
  api: 3.0
  author: MiracelVip
  repo_url: https://github.com/MiracelVip/cbpi-ExtendedMenu.git

GPIObutton:
  description: This is a CraftBeerPi 3.0 sensor that allows you to have up to 4 physical buttons in order to accept GPIO button press after which it performs an API call.
  api: 3.0
  author: Jan Haudhuyze
  repo_url: https://github.com/jhhbe/cbpi.git
  
SayItPlugin:
  description: A simple notification reader for for CraftBeerPi3
  api: 3.0
  author: Lawrence N Wagy
  repo_url: https://github.com/lwagy/SayIt.git

BrewersFriend:
  description: A simple notification reader for for CraftBeerPi3
  api: 3.0
  author: Carl Allen
  repo_url: https://github.com/carlallen/cbpi_BrewersFriend.git
  
Nexa433:
  description: Plugin for HomeEasy/Nexa 433 mhz self-learning power sockets
  api: 3.0
  author: Michael Mackiewicz
  repo_url: https://github.com/Lai1337/cbpi-homeeasy_nexa433.git