Expansion board for Raspberry PI allowing to use coaxial SMA output instead of direct wire connection to GPIO to connect radio equipment (antennas, amplifiers, switches, etc.) when working with the rpitx package.
The PCB is installed by attaching to the GPIO of the Raspberry PI and can be additionally fixed by using the holes on the Raspberry PI and expansion board side.
In Datasheets and Schematics directories, you can find all necessary technical documentation for the used components and schematic files in PDF format. If you only need GERBER files, you can find them in the appropriate Gerbers directory. In the EasyEDA directory, you can find a list of files for implementing the ready device (files can be imported into EasyEDA editor). Based on submitted files, you can order PCB from factory manufacturing make the device independently.
PCB versions:
- PCB_rpitx-coax-pcb-NOFILTER - no filtering, only output to SMA connector
- PCB_rpitx-coax-pcb-GP1212-GP731 - the radio path passes through a filter in the GP1212 / GP731 case
RF connector: SMA
Feed line: 50 Ohm coaxial cable
Used PCB Material: FR-4
PCB thickness: 1.6 mm
PCB copper weight: 1 oz
rpitx project page at GitHub
Buy filters in GP1212 / GP731 case
- E-mail: [email protected]
- Telegram: https://t.me/igrikxd
- LinkedIn: https://www.linkedin.com/in/igor-yatsevich/