Skip to content

Latest commit

 

History

History
121 lines (101 loc) · 5.24 KB

README.md

File metadata and controls

121 lines (101 loc) · 5.24 KB
Raw

RiscV Emulator

This is an (WIP) implementation of a interpreting simulator of the RiscV ISA. In a sense this is an educational reimplementation of https://github.com/riscv-software-src/riscv-isa-sim in Rust.

The current state is that this project is abandoned with its current feature set, which is enough to run machine mode and user mode RV64IM_Zicsr_Zifencei code with some of the most important csrs implemented.

Goals

Support running xv6, which runs on the virt qemu board. See https://www.qemu.org/docs/master/system/target-riscv.html#risc-v-cpu-firmware. It also uses a virtio block device. I modified the Makefile to run on march=rv64ima_zicsr_zifencei. xv6 uses the following csrs: "medeleg, mepc, mhartid, mideleg, mie, mscratch, mstatus, mtvec, pmpaddr0, pmpcfg0, satp, scause, sepc, sie, sip, sscratch, sstatus, stval, stvec"

Execution Environment Spec

TODO

  • Supervisor Mode
  • A mock
  • Virtual Memory
  • PLIC/CLIC
  • Timer Interrupt, proper csr, mstatus: TW & WFI, ...
  • Virtio block device
  • UART
  • Use Wrapping as the integer type (?)
  • C

Tests

There are some tests here: https://github.com/riscv-software-src/riscv-tests that runs on TVMs which I don't find specified.

But there is also a https://riscof.readthedocs.io/en/stable/arch-tests.html with RISCV-config.

TVM rv32ui reverse engineering

The program should load to 0x80000000, both in 32 and 64 bit, and start execution there. However, it is PIC (except for optional memory protection I think).

CSRs

  • mhartid must read 0, else the test stalls.
  • mtvec must be writable. It is used to skip potentially illegal instructions.
  • satp is set to zero or skipped if this traps.
  • pmpaddr0 and pmpcfg0 are set to -1 and 31 respectively or skipped if they trap.
  • mie must be writable. Set to 0 to disable interrupts.
  • medeleg and mideleg are set to 0 or skipped if they trap.
  • stvec is maybe set to 0 (Not sure since there seems to be dead code there).
  • mstatus is set to 0 (probaly to return to the lowest priviledge).
  • mepc is set to the address of the first test. Then a mret is executed, dropping priviledge and start the testing.

Trap vector

The trap vector is directly mapped to 0x80000004 after init. Interupts 8, 9 & 11 (the three ECALL variants) call write_tohost. The rest I don't get. Its seems wrong. Exception get a code 1337.

Host communication

write_tohost writes a word in gp to 0x80001000, probably a memory mapped output.

If the program is run in 64 bit, error code 1 is written. If at the end of execution, gp is zero, the program stalls. Else it returns 1 on success or 2*TestcaseNumber + 1 on failure. Plus is tests some registers.

GNU Toolchain installation

for https://github.com/riscv-collab/riscv-gnu-toolchain I apt installed the following:

autoconf/jammy,jammy 2.71-2 all
automake/jammy,jammy 1:1.16.5-1.3 all
autotools-dev/jammy,jammy 20220109.1 all
bison/jammy 2:3.8.2+dfsg-1build1 amd64
build-essential/jammy 12.9ubuntu3 amd64
flex/jammy 2.6.4-8build2 amd64
gawk/jammy 1:5.1.0-1build3 amd64
gperf/jammy 3.1-1build1 amd64
libgmp-dev/jammy 2:6.2.1+dfsg-3ubuntu1 amd64
libmpc-dev/jammy 1.2.1-2build1 amd64
libmpfr-dev/jammy 4.1.0-3build3 amd64
libtool/jammy,jammy 2.4.6-15build2 all
ninja-build/jammy 1.10.1-1 amd64
patchutils/jammy 0.4.2-1build2 amd64
texinfo/jammy 6.8-4build1 amd64
zlib1g-dev/jammy-updates,jammy-security 1:1.2.11.dfsg-2ubuntu9.2 amd64

The following additional packages will be installed:
  dpkg-dev fakeroot libalgorithm-diff-perl libalgorithm-diff-xs-perl libalgorithm-merge-perl
  libfakeroot libfl-dev libfl2 libgmpxx4ldbl libltdl-dev libsigsegv2 libtext-unidecode-perl
  libxml-libxml-perl libxml-namespacesupport-perl libxml-sax-base-perl libxml-sax-expat-perl
  libxml-sax-perl lto-disabled-list m4 tex-common
Suggested packages:
  autoconf-archive gnu-standards autoconf-doc gettext bison-doc debian-keyring flex-doc
  gawk-doc gmp-doc libgmp10-doc libtool-doc libmpfr-doc gfortran | fortran95-compiler gcj-jdk
  libxml-sax-expatxs-perl m4-doc debhelper texlive-base texlive-latex-base
  texlive-plain-generic texlive-fonts-recommended
The following NEW packages will be installed:
  autoconf automake autotools-dev bison build-essential dpkg-dev fakeroot flex gawk gperf
  libalgorithm-diff-perl libalgorithm-diff-xs-perl libalgorithm-merge-perl libfakeroot
  libfl-dev libfl2 libgmp-dev libgmpxx4ldbl libltdl-dev libmpc-dev libmpfr-dev libsigsegv2
  libtext-unidecode-perl libtool libxml-libxml-perl libxml-namespacesupport-perl
  libxml-sax-base-perl libxml-sax-expat-perl libxml-sax-perl lto-disabled-list m4 ninja-build
  patchutils tex-common texinfo zlib1g-dev
0 upgraded, 36 newly installed, 0 to remove and 7 not upgraded.