Discussion thread: coming soon...
Donate:
Latest version V3.0.0 (26.09.2023)
- critical fix, com port open error on some PC's
- Connect your DJI Remote Controller to your PC and use it to play simulators
- Confirmed DJI Mavic 3 RC231
- For Mavic Mini or a Python interface, take a look at justin97530/miniDjiController
- For DJI Mini 2 or a Python interface, take a look at usatenko/DjiMini2RCasJoystick
- For DJI Phantom 3 take a look at mishavoloshchuk/mDjiController
This is a program that connects to your DJI Mavic 3 Remote Controller (RC-N1) as a XBox360 gamepad, reads the stick positions and tells Windows that position.
Installation / Usage
-
Install packages before usage:
-
dji-assistant-2-consumer-drones-series and close it after installation https://www.dji.com/downloads/softwares/dji-assistant-2-consumer-drones-series
-
python 3.9 or 3.x
-
pip3 install vgamepad
-
pip3 install pyserial
-
Power on RC-N1
-
Connect via bottom type-C
-
run main.py
-
run yor simulator
for restart game or recover drone: use camera wheel, left scroll
App searching by itself for the serial port with description "DJI USB VCOM For Protocol"
make sure your device attached via bottom Type-C connector
Preset:
Mode 2
Acro
Zero throttle at stick center
