Best Orca Slicer Configuration for Sovol SV06 Plus
If you've landed on this page, it's likely because you've struggled to locate a reliable SOVOL SV06 profile compatible with Orca Slicer for your Klipper/Mainsail setup. If that's the case, you're in the right place – please continue reading below!
If you don't have already Orca Slicer you can download from: https://github.com/SoftFever/OrcaSlicer/releases Once you Install follow the steps below!
Orca Profile Settings
Strength Recommendation
Speed Recommendation
Support Recommendation
Regarding the Support tab, it's typically set up on a per-model basis. If you're wondering whether to add support to a particular model, it's advisable to refer to the recommendations provided by the designer of that specific model. Make adjustments according to their suggested settings.
Others Recommendation
In the "Others" section, the sole adjustment required is modifying the Brim type. By default, it is configured to Auto, but if the model possesses a substantial base, consider switching it to No-Brim. This prevents any potential mess around the model.
--------------- PRINTER SETTINGS IN ORCA SLICER ---------------
Basic Information
Machine G-code Settings
Machine start G-code
M104 S0 ; Stops SuperSlicer from sending temp waits separately
M140 S0
print_start EXTRUDER=[first_layer_temperature] BED=[first_layer_bed_temperature]
Machine end G-code
PRINT_END
Extruder Settings This Secion is Extremly Important this will save you from your nozzile hitting your model and braking and causing fail prints.
Motion ability Settings This Secion is Extremly Important will help you with Speed, Acceleration & Jerk limitation.
** MAINSAIL PRINTER.CFG Settings**
in printer.cfg file I will include my current file how ever make sure you back up yours if you want to copy and use my file.
Only thing you going to need to update is the follow:
[printer]
kinematics: cartesian
max_velocity: 300
max_accel: 4000
max_z_velocity: 10
max_z_accel: 45
square_corner_velocity: 8
If you have any suggestions, please don't hesitate to reach out. Additionally, if you would like to contribute more content to this page, feel free to do so!
That is all folks ** ENOY!!! **