squashed gingerbread

Change-Id: I0e9aecd3083e7362305f788a378046d347a739c2

Android.mk

@@ -0,0 +1,45 @@
+# Copyright (C) 2010 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+LOCAL_PATH := $(call my-dir)
+
+ifeq ($(TARGET_DEVICE),captivatemtd)
+
+include $(CLEAR_VARS)
+LOCAL_SRC_FILES := s3c-keypad.kcm
+LOCAL_MODULE_TAGS := optional
+include $(BUILD_KEY_CHAR_MAP)
+
+include $(CLEAR_VARS)
+LOCAL_SRC_FILES := cypress-touchkey.kcm
+LOCAL_MODULE_TAGS := optional
+include $(BUILD_KEY_CHAR_MAP)
+
+include $(CLEAR_VARS)
+LOCAL_SRC_FILES := sec_jack.kcm
+LOCAL_MODULE_TAGS := optional
+include $(BUILD_KEY_CHAR_MAP)
+
+include $(CLEAR_VARS)
+LOCAL_SRC_FILES := setup_fs.c
+LOCAL_MODULE := setup_fs
+LOCAL_MODULE_TAGS := optional
+#LOCAL_SHARED_LIBRARIES += libext4_utils libz
+include $(BUILD_EXECUTABLE)
+
+ifneq ($(TARGET_SIMULATOR),true)
+include $(call all-makefiles-under,$(LOCAL_PATH))
+endif
+
+endif

AndroidBoard.mk

@@ -0,0 +1,8 @@
+LOCAL_PATH := $(call my-dir)
+
+include $(CLEAR_VARS)
+
+ALL_PREBUILT += $(INSTALLED_KERNEL_TARGET)
+
+# include the non-open-source counterpart to this file
+-include vendor/samsung/captivatemtd/AndroidBoardVendor.mk

AndroidProducts.mk

@@ -0,0 +1,29 @@
+#
+# Copyright (C) 2008 The Android Open-Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+#
+# This file should set PRODUCT_MAKEFILES to a list of product makefiles
+# to expose to the build system.  LOCAL_DIR will already be set to
+# the directory containing this file.
+#
+# This file may not rely on the value of any variable other than
+# LOCAL_DIR; do not use any conditionals, and do not look up the
+# value of any variable that isn't set in this file or in a file that
+# it includes.
+#
+
+PRODUCT_MAKEFILES := \
+    $(LOCAL_DIR)/full_captivatemtd.mk

BoardConfig.mk

@@ -0,0 +1,98 @@
+# Copyright (C) 2007 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# BoardConfig.mk
+#
+# Product-specific compile-time definitions.
+#
+
+# Set this up here so that BoardVendorConfig.mk can override it
+BOARD_USES_GENERIC_AUDIO := false
+
+BOARD_USES_LIBSECRIL_STUB := true
+
+# Use the non-open-source parts, if they're present
+-include vendor/samsung/captivatemtd/BoardConfigVendor.mk
+
+TARGET_CPU_ABI := armeabi-v7a
+TARGET_CPU_ABI2 := armeabi
+TARGET_ARCH_VARIANT := armv7-a-neon
+ARCH_ARM_HAVE_TLS_REGISTER := true
+TARGET_GLOBAL_CFLAGS += -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp
+TARGET_GLOBAL_CPPFLAGS += -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp
+
+TARGET_NO_BOOTLOADER := true
+TARGET_NO_RADIOIMAGE := true
+
+TARGET_PROVIDES_INIT := true
+TARGET_BOARD_PLATFORM := s5pv210
+TARGET_BOOTLOADER_BOARD_NAME := aries
+TARGET_RECOVERY_INITRC := device/samsung/aries-common/recovery.rc
+
+BOARD_MOBILEDATA_INTERFACE_NAME = "pdp0"
+
+# Releasetools
+TARGET_RELEASETOOL_OTA_FROM_TARGET_SCRIPT := ./device/samsung/aries-common/releasetools/aries_ota_from_target_files
+TARGET_RELEASETOOL_IMG_FROM_TARGET_SCRIPT := ./device/samsung/aries-common/releasetools/aries_img_from_target_files
+
+# Camera
+USE_CAMERA_STUB := false
+ifeq ($(USE_CAMERA_STUB),false)
+BOARD_CAMERA_LIBRARIES := libcamera
+endif
+
+# Bluetooth
+BOARD_HAVE_BLUETOOTH := true
+BOARD_HAVE_BLUETOOTH_BCM := true
+
+# Video Devices
+BOARD_USES_OVERLAY := true
+BOARD_V4L2_DEVICE := /dev/video1
+BOARD_CAMERA_DEVICE := /dev/video0
+
+BOARD_NAND_PAGE_SIZE := 4096 -s 128
+BOARD_KERNEL_BASE := 0x32000000
+BOARD_KERNEL_PAGESIZE := 4096
+BOARD_KERNEL_CMDLINE := console=ttyFIQ0,115200 init=/init no_console_suspend
+TARGET_PREBUILT_KERNEL := device/samsung/captivatemtd/kernel
+
+BOARD_BOOTIMAGE_PARTITION_SIZE := 7864320
+BOARD_SYSTEMIMAGE_PARTITION_SIZE := 196608000
+BOARD_USERDATAIMAGE_PARTITION_SIZE := 2013265920
+BOARD_FLASH_BLOCK_SIZE := 4096
+
+# Connectivity - Wi-Fi
+WPA_SUPPLICANT_VERSION := VER_0_6_X
+BOARD_WPA_SUPPLICANT_DRIVER := WEXT
+BOARD_WLAN_DEVICE := bcm4329
+WIFI_DRIVER_MODULE_PATH     := "/system/lib/modules/bcm4329.ko"
+WIFI_DRIVER_FW_STA_PATH     := "/vendor/firmware/fw_bcm4329.bin"
+WIFI_DRIVER_FW_AP_PATH      := "/vendor/firmware/fw_bcm4329_apsta.bin"
+WIFI_DRIVER_MODULE_NAME     :=  "bcm4329"
+WIFI_DRIVER_MODULE_ARG      :=  "firmware_path=/vendor/firmware/fw_bcm4329.bin nvram_path=/vendor/firmware/nvram_net.txt"
+
+# Vold
+BOARD_VOLD_EMMC_SHARES_DEV_MAJOR := true
+
+# Recovery
+TARGET_USERIMAGES_USE_EXT4 := true
+BOARD_HAS_NO_SELECT_BUTTON := true
+BOARD_USES_BML_OVER_MTD := true
+BOARD_CUSTOM_BOOTIMG_MK := device/samsung/aries-common/shbootimg.mk
+TARGET_RECOVERY_PRE_COMMAND := "echo 1 > /cache/.startrecovery; sync;"
+
+# Include aries specific stuff
+-include device/samsung/aries-common/Android.mk
+
+TARGET_OTA_ASSERT_DEVICE := captivate,captivatemtd,SGH-I896,SGH-I897

CleanSpec.mk

@@ -0,0 +1,60 @@
+# Copyright (C) 2007 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# If you don't need to do a full clean build but would like to touch
+# a file or delete some intermediate files, add a clean step to the end
+# of the list.  These steps will only be run once, if they haven't been
+# run before.
+#
+# E.g.:
+#     $(call add-clean-step, touch -c external/sqlite/sqlite3.h)
+#     $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES/libz_intermediates)
+#
+# Always use "touch -c" and "rm -f" or "rm -rf" to gracefully deal with
+# files that are missing or have been moved.
+#
+# Use $(PRODUCT_OUT) to get to the "out/target/product/blah/" directory.
+# Use $(OUT_DIR) to refer to the "out" directory.
+#
+# If you need to re-do something that's already mentioned, just copy
+# the command and add it to the bottom of the list.  E.g., if a change
+# that you made last week required touching a file and a change you
+# made today requires touching the same file, just copy the old
+# touch step and add it to the end of the list.
+#
+# ************************************************
+# NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST
+# ************************************************
+
+# For example:
+#$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/AndroidTests_intermediates)
+#$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/core_intermediates)
+#$(call add-clean-step, find $(OUT_DIR) -type f -name "IGTalkSession*" -print0 | xargs -0 rm -f)
+#$(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/*)
+$(call add-clean-step, find $(PRODUCT_OUT) -name "*.apk" | xargs rm)
+
+# ************************************************
+# NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST
+# ************************************************
+$(call add-clean-step, rm -rf $(TARGET_OUT)/build.prop)
+$(call add-clean-step, rm -rf $(OUT_DIR)/target/product/captivatemtd/obj/SHARED_LIBRARIES/libaudio_intermediates)
+$(call add-clean-step, rm -rf $(OUT_DIR)/target/product/captivatemtd/obj/SHARED_LIBRARIES/libaudio_intermediates)
+$(call add-clean-step, rm -rf $(OUT_DIR)/target/product/captivatemtd/obj/STATIC_LIBRARIES/libasound_intermediates)
+$(call add-clean-step, rm -rf $(OUT_DIR)/target/product/captivatemtd/obj/EXECUTABLES/alsa_*)
+$(call add-clean-step, rm -rf $(OUT_DIR)/target/product/captivatemtd/system/bin/alsa_*)
+$(call add-clean-step, rm -rf $(OUT_DIR)/target/product/captivatemtd/system/etc/asound.conf)
+$(call add-clean-step, rm -rf $(OUT_DIR)/target/product/captivatemtd/system/usr/share/alsa)
+$(call add-clean-step, rm -rf $(OUT_DIR)/target/product/captivatemtd/obj/PACKAGING/systemimage_intermediates)
+$(call add-clean-step, rm -rf $(OUT_DIR)/target/product/captivatemtd/obj/SHARED_LIBRARIES/libaudio_intermediates)

aries-keypad.kl

@@ -0,0 +1,7 @@
+key 115    VOLUME_UP      WAKE
+key 114    VOLUME_DOWN    WAKE
+key 116    POWER          WAKE
+key 139    MENU           VIRTUAL
+key 102    HOME           VIRTUAL
+key 158    BACK           VIRTUAL
+key 217    SEARCH         VIRTUAL