Skip to content

Latest commit

 

History

History
177 lines (107 loc) · 12.5 KB

ABOUT.md

File metadata and controls

177 lines (107 loc) · 12.5 KB
Raw

Action: Manage Groups.io lists From GitHub, autogenerate a member directory of group members

This GitHub Action enables you to manage membership of Groups.io lists using a YAML file in a GitHub repo. It also autogenerates a nicely formatted directory.

Note: A Groups.io Premium or Enterprise subscription is required for this to work, as it uses the "Direct Add" functionality of Groups.io.

At a high level, this Action parses a directory of YAML files containing Groups.io subgroup membership data. It then updates each Groups.io subgroup appropriately, adding and removing list subscribers.

Once the subgroups are managed, it then autogenerates a directory README.md in markdown. Users can opt to add additional information, such as their roles in the project, their preferred pronouns, where to find them on Twitter or LinkedIn, a profile photo, etc.

In order to manage a subgroup, you must add a moderator account to the group with certain permissions (more below). To avoid undesirable outcomes, this Action can only manage subgroups which contain this moderator.

The YAML file uses a flexible and intuitive structure:

minimal-subgroup:
  name: A minimal subgroup
  description: This is an example of the bare minimum information required
  list-members:
    - email: [email protected]
      name: Member Name
    - email: [email protected]
      name: Member2 Name
...

... and so on. This script will keep group members' emails synced to the relevant subgroups. Group members with Moderator or Owner status are ignored.

In addition, this Action can manage a meta list containing all of the members.

Prerequisites

You need a Premium or Enterprise Groups.io subscription:

The Direct Add functionality is only available to Premium and Enterprise subscribers. This Action won't work on free accounts.

You should create a groups.io account with moderator permissions:

You must have a groups.io account with sufficient permissions to add and remove members from the subgroups you plan to manage. You should create a dummy account for this purpose, because although the credentials are encrypted using GitHub Secrets, you shouldn't be using your credentials for GitHub Actions.

At a high level, you will create a new user, and make it a moderator on the main list with a limited set of permissions. You'll then Direct Add that user to each subgroup you want to manage, make it a moderator in these subgroups, and again grant it a limited set of permissions.

You may be tempted to just make it a group Owner. Please don't. It will work, but it grants anyone with access to this configuration file the ability to add/remove users from any list in your group. You don't want this.

Here's how to do this:

  1. Use Direct Add to add a user on main, for example (with email delivery disabled):

    Don't forget to disable all of the email notifications sent to moderators.

  2. Give this user a really strong password. You can do this by visiting the login page through an incognito window, requesting a password link for the new user, and then opening the reset link in the incognito window. Don't forget to save the user/password combo, because you'll need them later.

  3. Once you've created this account, make it a moderator in the main group, and grant it only these permissions:

    • Invite Members
    • Modify Group Settings
    • View Member List

  4. Next, navigate to a Subgroup you want this Action to manage. Use Direct Add to add the account to the subgroup, change it to a Moderator within the subgroup, and grant the following permissions only:

    • Add Members
    • Remove Members

  5. Repeat the previous step with each subgroup you want this file to manage. Don't forget to add your meta list, too.

You need to find your internal Group name:

Groups.io uses a special internal name for your group. It is not the name which appears on the website, nor is it your URL. You can find it by going to Settings » Export Group Data. Select "Group Info" and wait for the download. In the zip file, look for group.json and find the value of name:. That is your group name.

You need to restrict membership and tell your users they now manage their list membership via GitHub

When a list is managed by the Action, it has to be the only thing managing membership. This is because it adds or removes members solely based upon the contents of the YAML file. You need to configure the subgroup information page to inform users they cannot join through the Groups.io interface, and point them to your YAML file.

  1. Under your Subgroup settings, make sure Restricted membership is checked.

  2. Update the Group Description to include a link to this repo where membership is managed.

  3. For regular groups, make the following updates:

    1. Update the Group Description and Welcome Message to include this text:

      This is a public list for coordination between PROJECT NAME maintainers.

      Membership in this project list is managed through the FOUNDATION NAME directory only. You can add or remove yourself from this list by opening a PR against this group. If configured, you will also be added to a meta list of all project leadership. To remain subscribed to this group but remove yourself from the meta list, add "include-on-meta-list: False" under your email in the group definition on GitHub.

      Please note that unsubscribing through Groups.io will not be permanent, as you will be re-joined when the group is synced. The only way to permanently unsubscribe is to remove yourself from the directory.

    2. Update the Message Footer to include this text:

      Your membership in this group is configured through https://github.com/FOUNDATIONORG/directory/groups only. Please open a PR to add, change, or remove your group subscriptions. Please note that unsubscribing through Groups.io will not be permanent, as you will be re-joined when the group is synced. The only way to permanently unsubscribe is to remove yourself from the directory.

    3. Update the Goodbye Message to include this text:

      You have been unsubscribed from the YOURLISTADDRESS list. If this was an error, please add yourself to the FOUNDATION NAME directory or email CONTACT to restore your access.

  4. For the meta list, make the following updates:

    1. Update the Group Description and welcome message to include this text:

      This is a public list for coordination between leadership groups in FOUNDATION NAME.

      Membership in this meta list is managed through the FOUNDATION NAME directory only. You can add or remove yourself from any project list by opening a PR against a group. You are added to this meta list when you add yourself to one or more groups in the directory, unless "include-on-meta-list: False" is under your email in the group definition on GitHub. Members are automatically removed when they are no longer in any groups in the directory.

      To remain subscribed to your group but remove yourself from this meta list, add "include-on-meta-list: False" under your email in the group definition on GitHub.

      Please note that unsubscribing through Groups.io will not be permanent, as you will be re-joined when the group is synced. The only way to permanently unsubscribe is to remove yourself from the directory.

    2. Update the Message Footer to include this text:

      You are a member of this list because you are in a group at https://github.com/FOUNDATIONORG/directory/groups. Please open a PR to add, change, or remove your group subscriptions. Please note that unsubscribing through Groups.io will not be permanent, as you will be re-joined when the group is synced. The only way to permanently unsubscribe is to remove yourself from the directory.

      To remain subscribed to your group but remove yourself from this meta list, add "include-on-meta-list: False" under your email in the group definition on GitHub.

Installation

  1. Make a backup of your group membership, just in case. Do this from the Settings panel of your main group.

  2. Clone the upstream template to a new repo within your organization called directory.

  3. (Optional) Update the text of groups/assets/INDEX_TEMPLATE.txt.default if you want. You should rename the file to INDEX_TEMPLATE.txt or something similar so it isn't overwritten if you merge in upstream changes. Keep track of the new filename for the next step.

  4. Update groups/assets/config.yml with your settings, including the renamed index template (if applicable).

  5. In the directory repo on GitHub, create a branch protection rule to prevent pushing directly to master. (This is because the directory is created when you push to a branch, and Groups.io is updated when those changes are merged.)

    1. In the directory repo, go to Settings.
    2. Under Branch protection rules click Add rule.
    3. Branch name pattern is master.
    4. Select the box Allow force pushes (this ensures the action can always overwrite README.md and others).

  6. Add the moderator account and password you created above as GitHub Secrets:

    1. In the directory repo, go to Settings.

    2. Under Secrets click Add a new secret and add the following two secrets:

      Name: GROUPSIO_USERNAME Value: (the moderator username you created earlier)

      Name: GROUPSIO_PASSWORD Value: (the moderator password you created earlier)

Configuring groups

  1. Create your YAML files to match the subgroups you created in advance. You can use groups/minimal_group_example.yml.txt, groups/full_group_example.yml.txt to help you get started. You can define multiple groups in one file, or have multiple files. Any file in groups/ with a .yml extension will be parsed, although files that don't contain the right info will be ignored.

    IMPORTANT: If you are managing a group which already exists, make sure those members are defined in one of the .yml files before you go to the next step. Once you start a sync, it will prune anybody who doesn't appear in the YAML file.

    The only exception is Groups.io moderators and admins. They are never pruned, even if they don't appear in a YAML file.

  2. Once you're done, open a PR and follow the instructions.

That should be everything you need to get going. Once you open a PR that changes a .yml file in groups/, it will attempt to build a directory. When that branch is merged to master, it will update Groups.io.

Please note that you cannot make any manual changes to the auto-generated directory. When this Action rebuilds the README.md and directory files, it will overwrite anything which is there.

About the meta list

If you configure a meta list on Groups.io and add it to config.yml, all group members will also be added to that list. This can be a useful way to distribute Foundation-wide information.

It is strongly recommended that you set the moderation flag to ensure that users aren't spammed, or hit with a Reply-all storm.

Users can keep their list subscription but not be included on the meta list by adding include-on-meta-list: False to their group file:

    - email: [email protected]
      name: Person2 Name
      include-on-meta-list: False

A final note on unsubscribing

Despite all of the text above, the About page, the welcome message, and the message footer, you may have users who ask why Groups.io unsubscribe doesn't permanently remove them. This is because the script always adds anyone defined in GitHub if they aren't in the Groups.io list. The only permanent way to unsubscribe is to be removed from the GitHub list definition.

Contact info

If you have an issue and it is not security-related, please open an issue at https://github.com/LF-Projects/directory/issues. If it is security-related, please contact me directly at [email protected].

Brian Warner | The Linux Foundation | [email protected], [email protected] | @realBrianWarner