Bluetooth BMS install stalled

[rldoose]

I'm attempting to get a BLE BMS setup for the first time. File /data/etc/dbus-serialbattery/config.ini reads as follows.

[DEFAULT]
MAX_BATTERY_CHARGE_CURRENT = 50.0
MAX_BATTERY_DISCHARGE_CURRENT = 60.0
MIN_CELL_VOLTAGE = 2.5
MAX_CELL_VOLTAGE = 3.650
FLOAT_CELL_VOLTAGE = 3.375
BLUETOOTH_BMS = LltJbd_Ble C3:27:20:37:C1:A4

After running /data/etc/dbus-serialbattery/reinstall-local.sh, the install gets to the state below:
Found 1 Bluetooth BMS in the config file!

Installing required packages...
Downloading https://updates.victronenergy.com/feeds/venus/release/packages/dunfell/all/Packages.gz.
Updated source 'all'.
Downloading https://updates.victronenergy.com/feeds/venus/release/packages/dunfell/cortexa7hf-neon-vfpv4/Packages.gz.
Updated source 'cortexa7hf-neon-vfpv4'.
Downloading https://updates.victronenergy.com/feeds/venus/release/packages/dunfell/raspberrypi2/Packages.gz.
Updated source 'raspberrypi2'.
Installing python3-xmlrpc (3.8.14) on root
Downloading https://updates.victronenergy.com/feeds/venus/release/packages/dunfell/cortexa7hf-neon-vfpv4/python3-xmlrpc_3.8.14-r0_cortexa7hf-neon-vfpv4.ipk.
Installing libjitterentropy2 (2.2.0) on root
Downloading https://updates.victronenergy.com/feeds/venus/release/packages/dunfell/cortexa7hf-neon-vfpv4/libjitterentropy2_2.2.0-r0_cortexa7hf-neon-vfpv4.ipk.
Installing libsysfs2 (2.1.0) on root
Downloading https://updates.victronenergy.com/feeds/venus/release/packages/dunfell/cortexa7hf-neon-vfpv4/libsysfs2_2.1.0-r5_cortexa7hf-neon-vfpv4.ipk.
Installing python3-pip (20.0.2) on root
Downloading https://updates.victronenergy.com/feeds/venus/release/packages/dunfell/cortexa7hf-neon-vfpv4/python3-pip_20.0.2-r0_cortexa7hf-neon-vfpv4.ipk.
Installing rng-tools (6.9) on root
Downloading https://updates.victronenergy.com/feeds/venus/release/packages/dunfell/cortexa7hf-neon-vfpv4/rng-tools_6.9-r0_cortexa7hf-neon-vfpv4.ipk.
Configuring libjitterentropy2.
Configuring libsysfs2.
Configuring rng-tools.
Adding system startup for /etc/init.d/rng-tools.
Starting random number generator daemon.
Configuring python3-xmlrpc.
Configuring python3-pip.
Collecting bleak
Downloading bleak-0.21.1-py3-none-any.whl (137 kB)
|████████████████████████████████| 137 kB 286 kB/s
Collecting typing-extensions>=4.7.0; python_version < "3.12"
Downloading typing_extensions-4.8.0-py3-none-any.whl (31 kB)
Collecting dbus-fast<3,>=1.83.0; platform_system == "Linux"
Downloading dbus_fast-2.14.0.tar.gz (68 kB)
|████████████████████████████████| 68 kB 289 kB/s
Installing build dependencies ... done
Getting requirements to build wheel ... done
Preparing wheel metadata ... done
Collecting async-timeout<5,>=3.0.0; python_version < "3.11"
Downloading async_timeout-4.0.3-py3-none-any.whl (5.7 kB)
Building wheels for collected packages: dbus-fast
Building wheel for dbus-fast (PEP 517) ... -

Any idea why it is hanging?
Thanks,
Reagan

[mr-manuel]

By looking at my crystal ball I assume that you are trying to install v1.0.20230531 and you are trying to install it on a weaker device like a Cerbo :-D This is a know issue and is fixed in the latest nightly of the dev branch.

Please read also the pinned discussion #856

[rldoose]

I really tried hard to meticulously fill your form.  Apologies if I missed the  version.  I do know that Raspberry Pi was selected as my hardware.  And, as I stated, I tried it on both RPi 3&4.

[mr-manuel]

Sorry but you did not mention, that you opened also a issue #861. In this thread the info is missing. If you don't link it, we cannot know all.

[rldoose]

My apologies. Thought I was just asking for community ideas. Did not realize this one would end up a support request.

…

On Nov 11, 2023, at 13:48, Manuel ***@***.***> wrote: Sorry but you did not mention, that you opened also a issue #861 <#861>. In this thread the info is missing. If you don't link it, we cannot know all. — Reply to this email directly, view it on GitHub <#860 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ACBAH45FBG25KN4CIKGYNJ3YD7JBBAVCNFSM6AAAAAA7GYGFFCVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TKNBSGA4DM>. You are receiving this because you authored the thread.

[mr-manuel]

Did you try the nightly?

[rldoose]

I have it installed, but need to connect it to battery. Under transit in RV, so no Wi-Fi to RPi. Will setup Starlink tonight and try then. Thanks for checking! Reagan Sent from iPhone

…

On Sun, Nov 12, 2023 at 03:47 Manuel ***@***.***> wrote: Did you try the nightly? — Reply to this email directly, view it on GitHub <#860 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ACBAH43TZDEHFWU2W2C5MMLYECLK7AVCNFSM6AAAAAA7GYGFFCVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TKNBUGUZDA> . You are receiving this because you authored the thread.Message ID: ***@***.*** com>

[rldoose]

I tried the nightly build. No initial success, but before I do further troubleshooting, I have a question. If “svstat /service/dbus-serialbattery.tty*” indicates the the driver is changing the PID about every 60 seconds, indicating “your driver is not stable and has a problem”, then something is wrong and must be fixed before further troubleshooting correct? BTW, I’m now back to trying the serial connection and have #861 open on that.

…

On Nov 12, 2023, at 03:47, Manuel ***@***.***> wrote: Did you try the nightly? — Reply to this email directly, view it on GitHub <#860 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ACBAH43TZDEHFWU2W2C5MMLYECLK7AVCNFSM6AAAAAA7GYGFFCVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TKNBUGUZDA>. You are receiving this because you authored the thread.

[mr-manuel]

Just check the logs instead of svstat :-)