BoardConfig.mk

# Copyright (C) 2015 The CyanogenMod Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

#
# This file sets variables that control the way modules are built
# thorughout the system. It should not be used to conditionally
# disable makefiles (the proper mechanism to control what gets
# included in a build is to use PRODUCT_PACKAGES in a product
# definition file).
#

# Inherit from oppo-common
-include device/oppo/common/BoardConfigCommon.mk

TARGET_OTA_ASSERT_DEVICE := OnePlus2,oneplus2

PLATFORM_PATH := device/oneplus/oneplus2

BOARD_VENDOR := oneplus

# Firmware
ADD_RADIO_FILES := true
TARGET_RELEASETOOLS_EXTENSIONS := device/oneplus/oneplus2

# Assertions
TARGET_BOARD_INFO_FILE ?= $(PLATFORM_PATH)/board-info.txt

# Bootloader
TARGET_BOOTLOADER_BOARD_NAME := MSM8994
TARGET_NO_BOOTLOADER := true

# Platform
TARGET_BOARD_PLATFORM := msm8994
TARGET_BOARD_PLATFORM_GPU := qcom-adreno430
TARGET_KEYMASTER_WAIT_FOR_QSEE := true

# Architecture
TARGET_ARCH := arm64
TARGET_ARCH_VARIANT := armv8-a
TARGET_CPU_ABI := arm64-v8a
TARGET_CPU_ABI2 :=
TARGET_CPU_VARIANT := generic

TARGET_2ND_ARCH := arm
TARGET_2ND_ARCH_VARIANT := armv7-a-neon
TARGET_2ND_CPU_ABI := armeabi-v7a
TARGET_2ND_CPU_ABI2 := armeabi
TARGET_2ND_CPU_VARIANT := cortex-a53.a57

TARGET_CPU_CORTEX_A53 := true

TARGET_BOARD_SUFFIX := _64
TARGET_USES_64_BIT_BINDER := true

# Kernel
BOARD_KERNEL_CMDLINE := androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 boot_cpus=0-5 androidboot.selinux=permissive
BOARD_KERNEL_BASE := 0x00000000
BOARD_KERNEL_PAGESIZE := 4096
BOARD_KERNEL_IMAGE_NAME := Image.gz-dtb
BOARD_RAMDISK_OFFSET := 0x01000000
TARGET_KERNEL_ARCH := arm64
TARGET_KERNEL_HEADER_ARCH := arm64
BOARD_MKBOOTIMG_ARGS := --tags_offset 0x00000100
TARGET_KERNEL_SOURCE := kernel/oneplus/msm8994
TARGET_KERNEL_CONFIG := cm_oneplus2_defconfig
TARGET_KERNEL_CROSS_COMPILE_PREFIX := aarch64-linux-android-
TARGET_USES_UNCOMPRESSED_KERNEL := true

# Kernel Toolchain
KERNEL_TOOLCHAIN := $(ANDROID_BUILD_TOP)/prebuilts/gcc/$(HOST_OS)-x86/aarch64/aarch64-linux-android-4.9-kernel/bin
KERNEL_TOOLCHAIN_PREFIX := aarch64-linux-android-

# QCOM hardware
BOARD_USES_QCOM_HARDWARE := true

# ANT+
BOARD_ANT_WIRELESS_DEVICE := "qualcomm-uart"

# Audio
AUDIO_FEATURE_ENABLED_ACDB_LICENSE := true
AUDIO_FEATURE_ENABLED_ANC_HEADSET := true
AUDIO_FEATURE_ENABLED_COMPRESS_CAPTURE := true
AUDIO_FEATURE_ENABLED_COMPRESS_VOIP := true
AUDIO_FEATURE_ENABLED_CUSTOMSTEREO := true
AUDIO_FEATURE_ENABLED_DS2_DOLBY_DAP := true
AUDIO_FEATURE_ENABLED_EXTN_FLAC_DECODER := true
AUDIO_FEATURE_ENABLED_EXTN_FORMATS := true
AUDIO_FEATURE_ENABLED_EXTN_RESAMPLER := false
AUDIO_FEATURE_ENABLED_FLAC_OFFLOAD := true
AUDIO_FEATURE_ENABLED_FLUENCE := true
AUDIO_FEATURE_ENABLED_HDMI_SPK := true
AUDIO_FEATURE_ENABLED_HDMI_EDID := true
AUDIO_FEATURE_ENABLED_HFP := true
AUDIO_FEATURE_ENABLED_HW_ACCELERATED_EFFECTS := false
AUDIO_FEATURE_ENABLED_INCALL_MUSIC := false
AUDIO_FEATURE_ENABLED_KPI_OPTIMIZE := true
AUDIO_FEATURE_ENABLED_MULTI_VOICE_SESSIONS := true
AUDIO_FEATURE_ENABLED_MULTIPLE_TUNNEL := true
AUDIO_FEATURE_ENABLED_PCM_OFFLOAD := true
AUDIO_FEATURE_ENABLED_PCM_OFFLOAD_24 := true
AUDIO_FEATURE_ENABLED_PROXY_DEVICE := true
AUDIO_FEATURE_ENABLED_SPKR_PROTECTION := true

AUDIO_USE_LL_AS_PRIMARY_OUTPUT := true
BOARD_USES_ALSA_AUDIO := true
USE_CUSTOM_AUDIO_POLICY := 1

# Bluetooth
BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := $(PLATFORM_PATH)/bluetooth
BOARD_HAS_QCA_BT_ROME := true
BOARD_HAVE_BLUETOOTH := true
BOARD_HAVE_BLUETOOTH_QCOM := true
QCOM_BT_USE_BTNV := true
QCOM_BT_USE_SMD_TTY := true

# Camera
USE_DEVICE_SPECIFIC_CAMERA := true

# Charger
BOARD_CHARGER_DISABLE_INIT_BLANK := true
BOARD_HEALTHD_CUSTOM_CHARGER_RES := $(PLATFORM_PATH)/charger/images

# CNE and DPM
TARGET_LDPRELOAD := libNimsWrap.so
BOARD_USES_QCNE := true

# Cpusets
ENABLE_CPUSETS := true

# GPS
TARGET_NO_RPC := true
USE_DEVICE_SPECIFIC_GPS := true

# Graphics
NUM_FRAMEBUFFER_SURFACE_BUFFERS := 3
TARGET_USES_ION := true
TARGET_USES_NEW_ION_API :=true
TARGET_USES_C2D_COMPOSITION := true
USE_OPENGL_RENDERER := true

MAX_EGL_CACHE_KEY_SIZE := 12*1024
MAX_EGL_CACHE_SIZE := 2048*1024

HAVE_ADRENO_SOURCE:= false
OVERRIDE_RS_DRIVER:= libRSDriver_adreno.so

# Include path
TARGET_SPECIFIC_HEADER_PATH := $(PLATFORM_PATH)/include

# Init
TARGET_UNIFIED_DEVICE := true
TARGET_INIT_VENDOR_LIB := libinit_msm
TARGET_PLATFORM_DEVICE_BASE := /devices/soc.0/
TARGET_LIBINIT_DEFINES_FILE := $(PLATFORM_PATH)/init/init_oneplus2.cpp

# Keystore
TARGET_PROVIDES_KEYMASTER := true

# Lights
TARGET_PROVIDES_LIBLIGHT := true

# RIL
TARGET_RIL_VARIANT := caf

# RPC
TARGET_NO_RPC := true

# Sensors
USE_SENSOR_MULTI_HAL := true

# Enable dexpreopt to speed boot time
ifeq ($(HOST_OS),linux)
  ifeq ($(call match-word-in-list,$(TARGET_BUILD_VARIANT),user),true)
    ifeq ($(WITH_DEXPREOPT),)
      WITH_DEXPREOPT := true
    endif
  endif
endif

# Wifi
BOARD_HAS_QCOM_WLAN := true
BOARD_HAS_QCOM_WLAN_SDK := true
BOARD_WLAN_DEVICE := qcwcn
BOARD_HOSTAPD_DRIVER := NL80211
BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_$(BOARD_WLAN_DEVICE)
BOARD_WPA_SUPPLICANT_DRIVER := NL80211
BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_$(BOARD_WLAN_DEVICE)
TARGET_USES_WCNSS_CTRL := true
TARGET_USES_QCOM_WCNSS_QMI := true
WIFI_DRIVER_FW_PATH_AP := "ap"
WIFI_DRIVER_FW_PATH_STA := "sta"
WIFI_DRIVER_FW_PATH_P2P := "p2p"
WPA_SUPPLICANT_VERSION := VER_0_8_X
CONFIG_EAP_PROXY := qmi
CONFIG_EAP_PROXY_DUAL_SIM := true
CONFIG_EAP_PROXY_AKA_PRIME := true
CONFIG_EAP_PROXY_MSM8994_TARGET := true

# Partitions
BOARD_BOOTIMAGE_PARTITION_SIZE := 67108864
BOARD_CACHEIMAGE_PARTITION_SIZE := 268435456
BOARD_RECOVERYIMAGE_PARTITION_SIZE := 67108864
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 2684354560
BOARD_USERDATAIMAGE_PARTITION_SIZE := 59047394304
BOARD_FLASH_BLOCK_SIZE := 262144
TARGET_USERIMAGES_USE_EXT4 := true
TARGET_USERIMAGES_USE_F2FS := true

# Crypto
TARGET_HW_DISK_ENCRYPTION := true

# Recovery
#TARGET_RECOVERY_FSTAB := $(PLATFORM_PATH)/rootdir/etc/fstab.qcom
# TWRP
TW_THEME := portrait_hdpi
BOARD_HAS_NO_REAL_SDCARD := true
TARGET_RECOVERY_QCOM_RTC_FIX := true
TARGET_RECOVERY_PIXEL_FORMAT := "RGBA_8888"
TW_BRIGHTNESS_PATH := /sys/class/leds/lcd-backlight/brightness
TW_MAX_BRIGHTNESS := 255
TW_DEFAULT_BRIGHTNESS := 100
TW_DEFAULT_LANGUAGE := en-US
TW_EXTRA_LANGUAGES := true
TW_INCLUDE_CRYPTO := true
TWHAVE_SELINUX := true
TW_TARGET_USES_QCOM_BSP := true

# MR config. MultiROM also uses parts of TWRP config
TARGET_RECOVERY_IS_MULTIROM := true
MR_ALLOW_NKK71_NOKEXEC_WORKAROUND := true
MR_CONTINUOUS_FB_UPDATE := true
MR_DPI := xhdpi
MR_DPI_FONT := 340
MR_USE_MROM_FSTAB := true
MR_FSTAB := device/oneplus/oneplus2/multirom/mrom.fstab
MR_INPUT_TYPE := type_b
MR_INIT_DEVICES := $(PLATFORM_PATH)/multirom/mr_init_devices.c
MR_KEXEC_MEM_MIN := 0x1fd00000
MR_KEXEC_DTB := true
MR_DEVICE_HOOKS := $(PLATFORM_PATH)/multirom/mr_hooks.c
MR_DEVICE_HOOKS_VER := 4
MR_DEVICE_VARIANTS := OnePlus2, oneplus2
MR_USE_QCOM_OVERLAY := true
MR_QCOM_OVERLAY_HEADER := $(PLATFORM_PATH)/multirom/mr_qcom_overlay.h
MR_QCOM_OVERLAY_CUSTOM_PIXEL_FORMAT := MDP_RGBX_8888
NEW_ION_HEAP := true
MR_QCOM_OVERLAY_HEAP_ID_MASK := 1
# bootmenu
DEVICE_RESOLUTION := 1080x1920
MR_PIXEL_FORMAT := "ABGR_8888"
RECOVERY_GRAPHICS_USE_LINELENGTH := true
# Versioning
include $(PLATFORM_PATH)/multirom/MR_REC_VERSION.mk
BOARD_MKBOOTIMG_ARGS += --board mrom$(MR_REC_VERSION)
MR_REC_VERSION := $(shell date -u +%Y%m%d)-01
MR_DEVICE_SPECIFIC_VERSION := b

#Force populating /dev/block/platform/msm_sdcc.1/by-name
#from the emmc
#MR_POPULATE_BY_NAME_PATH := "/dev/block/platform/soc.0/f9824900.sdhci/by-name"

# SELinux
include device/qcom/sepolicy/sepolicy.mk

BOARD_SEPOLICY_DIRS += $(PLATFORM_PATH)/sepolicy

# Time services
BOARD_USES_QC_TIME_SERVICES := true

# CM Hardware
BOARD_HARDWARE_CLASS += $(PLATFORM_PATH)/cmhw
TARGET_TAP_TO_WAKE_NODE := "/proc/touchpanel/double_tap_enable"

# inherit from the proprietary version
-include vendor/oneplus/oneplus2/BoardConfigVendor.mk