Problem iso orangepi 3 lts

[Seb-tech77]

Hello, I have a problem when writing the image of orange pi 3 lts on my sd card, balena etcher puts me an error while with other images it works perfectly. Could you help me?

Cordially

[MichaIng]

Thanks for reporting. Does it work with rufus?

[Seb-tech77]

Indeed, I had not tested with rufus, it seems to work. I would test to see if the boot card correctly

[MichaIng]

I remember such was reported before. I guess we need to check which problem extractly BelanaEtcher has with our .img.xz files. Btw did you extract it beforehand or selected the xz archive as is?

[Seb-tech77]

Hello, I extracted the disk image from the archive and copied it with balenaetcher

[MichaIng]

Ah okay, so the archive is not the problem. Probably the last partition needs to be a little larger than the last filesystem. We currently size it tight.

[Seb-tech77]

okay, no worries. I'll do this with rufus then if it works. Thanks for your help

[MichaIng]

And did it work with Rufus?

[Seb-tech77]

Hi, sorry I totally forgot to test.

I tested starting up with rufus and it boots fine and I get no errors.