Skip to content

Latest commit

 

History

History
167 lines (119 loc) · 5.1 KB

README.md

File metadata and controls

167 lines (119 loc) · 5.1 KB
Raw

\mainpage Main Page

LED Driver 11 Click

LED Driver 11 Click is a compact add-on board that simplifies the control of multiple LEDs. This board features the WLMDU9456001JT (172946001), a fully integrated constant current LED driver with the buck switching regulator and inductor in a single package from Würth Elektronik.

Click Product page

Click library

  • Author : Stefan Filipovic
  • Date : Jul 2021.
  • Type : I2C type

Software Support

We provide a library for the LEDDriver11 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Library Description

This library contains API for LEDDriver11 Click driver.

Standard key functions :

  • leddriver11_cfg_setup Config Object Initialization function.
void leddriver11_cfg_setup ( leddriver11_cfg_t *cfg );
  • leddriver11_init Initialization function.
err_t leddriver11_init ( leddriver11_t *ctx, leddriver11_cfg_t *cfg );
  • leddriver11_default_cfg Click Default Configuration function.
err_t leddriver11_default_cfg ( leddriver11_t *ctx );

Example key functions :

  • leddriver11_pwm_start This function starts the PWM moudle output.
err_t leddriver11_pwm_start ( leddriver11_t *ctx );
  • leddriver11_set_current This function sets the LEDs current via a 12-bit DAC module.
err_t leddriver11_set_current ( leddriver11_t *ctx, uint16_t curr );
  • leddriver11_set_duty_cycle This function sets the PWM duty cycle in percentages ( Range[ 0..1 ] ).
err_t leddriver11_set_duty_cycle ( leddriver11_t *ctx, float duty_cycle );

Example Description

This example demonstrates the use of LED Driver 11 Click board.

The demo application is composed of two sections :

Application Init

Initializes the driver and executes the Click default configuration which starts the PWM module and sets the LEDs current to minimum.

void application_init ( void )
{
    log_cfg_t log_cfg;                  /**< Logger config object. */
    leddriver11_cfg_t leddriver11_cfg;  /**< Click config object. */

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );

    // Click initialization.
    leddriver11_cfg_setup( &leddriver11_cfg );
    LEDDRIVER11_MAP_MIKROBUS( leddriver11_cfg, MIKROBUS_1 );
    err_t init_flag = leddriver11_init( &leddriver11, &leddriver11_cfg );
    if ( I2C_MASTER_ERROR == init_flag ) 
    {
        log_error( &logger, " Application Init Error. " );
        log_info( &logger, " Please, run program again... " );

        for ( ; ; );
    }

    leddriver11_default_cfg ( &leddriver11 );
    log_printf( &logger, " Dimming the LEDs light...\r\n" );
}

Application Task

Controls the LEDs brightness by changing the PWM duty cycle. The PWM duty cycle percentage will be logged on the USB UART.

void application_task ( void )
{
    static int16_t duty_cnt = 1;
    static int8_t duty_inc = 1;
    float duty = duty_cnt / 10.0;
    
    leddriver11_set_duty_cycle ( &leddriver11, duty );
    log_printf( &logger, "> Duty: %u%%\r\n", ( uint16_t )( duty_cnt * 10 ) );
    
    Delay_ms ( 500 );
    
    if ( 10 == duty_cnt ) 
    {
        duty_inc = -1;
    }
    else if ( 0 == duty_cnt ) 
    {
        duty_inc = 1;
    }
    duty_cnt += duty_inc;
}

The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Other Mikroe Libraries used in the example:

  • MikroSDK.Board
  • MikroSDK.Log
  • Click.LEDDriver11

Additional notes and informations

Depending on the development board you are using, you may need USB UART Click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.