Skip to content

Latest commit

 

History

History
412 lines (269 loc) · 20.7 KB

README.md

File metadata and controls

412 lines (269 loc) · 20.7 KB
Raw

Aries Cloud Agent Python (ACA-Py) Demos

There are several demos available for ACA-Py mostly (but not only) aimed at developers learning how to deploy an instance of the agent and an ACA-Py controller to implement an application.

Table of Contents

The IIWBook Demo

The IIWBook demo is a real (play) self-sovereign identity demonstration. During the demo, you will get a mobile agent (sorry - IOS only right now), and use that agent to connect with several enterprise services to collect and prove credentials. The two services in the demo (the email verification service and IIWBook) are both instances of ACA-Py, and all the agents are using DIDComm to communicate. Learn about and run the demo at https://vonx.io/how_to/iiwbook. Developers, when you are ready, check out the code in the repos of the two services to see how they implement Django web server-based controller and agent.

The Alice/Faber Python demo

The Alice/Faber demo is the (in)famous first verifiable credentials demo. Alice, a former student of Faber College ("Knowledge is Good"), connects with the College, is issued a credential about her degree and then is asked by the College for a proof. There are a variety of ways of running the demo. The easiest is in your browser using a site ("Play with VON") that let's you run docker containers without installing anything. Alternatively, you can run locally on docker (our recommendation), or using python on your local machine. Each approach is covered below.

Running in a Browser

In your browser, go to the docker playground service Play with VON (from the BC Gov). On the title screen, click "Start". On the next screen, click (in the left menu) "+Add a new instance". That will start up a terminal in your browser. Run the following commands to start the Faber agent:

git clone https://github.com/hyperledger/aries-cloudagent-python
cd aries-cloudagent-python/demo
LEDGER_URL=http://dev.greenlight.bcovrin.vonx.io ./run_demo faber

Now to start Alice's agent. Click the "+Add a new instance" button again to open another terminal session. Run the following commands to start Alice's agent:

git clone https://github.com/hyperledger/aries-cloudagent-python
cd aries-cloudagent-python/demo
LEDGER_URL=http://dev.greenlight.bcovrin.vonx.io ./run_demo alice

Alice's agent is now running.

Jump to the Follow the Script section below for further instructions.

Running in Docker

Running the demo in docker requires having a von-network (a Hyperledger Indy public ledger sandbox) instance running in docker locally. See the Running the Network Locally section of the von-network readme file for more info.

Open three bash shells. For Windows users, git-bash is highly recommended. bash is the default shell in Linux and Mac terminal sessions.

In the first terminal window, start von-network by following the Running the Network Locally instructions.

In the second terminal, change directory into demo directory of your clone of this repository. Start the faber agent by issuing the following command:

  ./run_demo faber

In the third terminal, change directory into demo directory of your clone of this repository. Start the alice agent by issuing the following command:

  ./run_demo alice

Jump to the Follow the Script section below for further instructions.

Running Locally

The following is an approach to to running the Alice and Faber demo using Python3 running on a bare machine. There are other ways to run the components, but this covers the general approach.

Installing Prerequisites

We assume you have a running Python 3 environment. To install the prerequisites specific to running the agent/controller examples in your Python environment, run the following command from this repo's demo folder. The precise command to run may vary based on your Python environment setup.

pip3 install -r demo/requirements.txt

While that process will include the installation of the Indy python prerequisite, you still have to build and install the libindy code for your platform. Follow the installation instructions in the indy-sdk repo for your platform.

Start a local indy ledger

Use instructions in the indy-sdk repo to run a local ledger.

Genesis File handling

An Aries agent (or other client) connecting to an Indy ledger must know the contents of the genesis file for the ledger. The genesis file lets the agent/client know the IP addresses of the initial nodes of the ledger, and the agent/client sends ledger requests to those IP addresses. When using the indy-sdk ledger, look for the instructions in that repo for how to find/update the ledger genesis file, and note the path to that file on your local system.

The envrionment variable GENESIS_FILE is used to let the Aries demo agents know the location of the genesis file. Use the path to that file as value of the GENESIS_FILE environment variable in the instructions below. You might want to copy that file to be local to the demo so the path is shorter.

Run a local Postgres instance

The demo uses the postgres database the wallet persistence. Use the Docker Hub certified postgres image to start up a postgres instance to be used for the wallet storage:

docker run --name some-postgres -e POSTGRES_PASSWORD=mysecretpassword -d -p 5432:5432 postgres -c 'log_statement=all' -c 'logging_collector=on' -c 'log_destination=stderr'

Optional: Run a von-network ledger browser

If you want to be able to browse your local ledger as you run the demo, clone the von-network repo, go into the root of the cloned instance and run the following command, replacing the /path/to/local-genesis.txt with a path to the same genesis file as was used in starting the ledger.

GENESIS_FILE=/path/to/local-genesis.txt PORT=9000 REGISTER_NEW_DIDS=true python -m server.server

Run the Alice and Faber Controllers/Agents

With the rest of the pieces running, you can run the Alice and Faber controllers and agents. To do so, cd into the demo folder your clone of this repo in two terminal windows and run the following, replacing the /path/to/local-genesis.txt.

GENESIS_FILE=/path/to/local-genesis.txt DEFAULT_POSTGRES=true python3 -m runners.faber --port 8020
GENESIS_FILE=/path/to/local-genesis.txt DEFAULT_POSTGRES=true python3 -m runners.alice --port 8030

Note that Alice and Faber will each use 5 ports, e.g. using the parameter ... --port 8020 actually uses ports 8020 through 8024. Feel free to use different ports if you want.

Everything running? See the Follow the Script section below for further instructions.

If the demo fails with an error that references the genesis file, a timeout connecting to the Indy Pool, or an Indy 307 error, it's likely a problem with the genesis file handling. Things to check:

  • Review the instructions for running the ledger with indy-sdk. Is it running properly?
  • Is the /path/to/local-genesis.txt file correct in your start commands?
  • Look at the IP addresses in the genesis file you are using, and make sure that those IP addresses are accessible from the location you are running the Aries demo
  • Check to make sure that all of the nodes of the ledger started. We've seen examples of only some of the nodes starting up, triggering an Indy 307 error.

Follow The Script

With both the Alice and Faber agents started, go to the Faber terminal window. The Faber agent has created and displayed an invitation. Copy this invitation and paste it at the Alice prompt. The agents will connect and then show a menu of options:

Faber:

    (1) Issue Credential
    (2) Send Proof Request
    (3) Send Message
    (4) Create New Invitation
    (T) Toggle tracing on credential/proof exchange
    (X) Exit?

Alice:

    (3) Send Message
    (4) Input New Invitation
    (X) Exit?

Exchanging Messages

Feel free to use the "3" option to send messages back and forth between the agents. Fun, eh? Those are secure, end-to-end encrypted messages.

Issuing and Proving Credentials

When ready to test the credentials exchange protocols, go to the Faber prompt, enter "1" to send a credential, and then "2" to request a proof.

You don't need to do anything with Alice's agent - her agent is implemented to automatically receive credentials and respond to proof requests.

Note there is an option "2a" to initiate a connectionless proof - you can execute this option but it will only work end-to-end when connecting to Faber from a mobile agent.

Additional Options in the Alice/Faber demo

You can enable support for various ACA-Py features by providing additional command-line arguements when starting up alice or faber.

Note that when the controller starts up the agent, it prints out the ACA-Py startup command with all parameters - you can inspect this command to see what parameters are provided in each case. For more details on the parameters, just start ACA-Py with the --help parameter, for example:

./scripts/run_docker start --help

Revocation

To enable support for revoking credentials, run the faber demo with the --revocation option:

./run_demo faber --revocation

Note that you don't specify this option with alice because it's only applicable for the credential issuer (who has to enable revocation when creating a credential definition, and explicitely revoke credentials as appropriate; alice doesn't have to do anything special when revocation is enabled).

You need to run a revocation registry in order to support revocation - the details are described in the Alice gets a Phone demo instructions.

Faber will setup support for revocation automatically, and you will see an extra option in faber's menu to revoke a credential:

    (1) Issue Credential
    (2) Send Proof Request
    (3) Send Message
    (4) Create New Invitation
    (5) Revoke Credential
    (6) Publish Revocations
    (T) Toggle tracing on credential/proof exchange
    (X) Exit?

When you issue a credential, make a note of the Revocation registry ID and Credential revocation ID:

Faber      | Revocation registry ID: WGmUNAdH2ZfeGvacFoMVVP:4:WGmUNAdH2ZfeGvacFoMVVP:3:CL:38:Faber.Agent.degree_schema:CL_ACCUM:15ca49ed-1250-4608-9e8f-c0d52d7260c3
Faber      | Credential revocation ID: 1

When you revoke a credential you will need to provide those values:

[1/2/3/4/5/6/T/X] 5

Enter revocation registry ID: WGmUNAdH2ZfeGvacFoMVVP:4:WGmUNAdH2ZfeGvacFoMVVP:3:CL:38:Faber.Agent.degree_schema:CL_ACCUM:15ca49ed-1250-4608-9e8f-c0d52d7260c3
Enter credential revocation ID: 1
Publish now? [Y/N]: y

Note that you need to Publish the revocation information to the ledger. Once you've revoked a credential any proof which uses this credential will fail to verify.

DID Exchange

You can enable DID Exchange using the --did-exchange parameter for the alice and faber demos.

This will use the new DID Exchange protocol when establishing connections between the agents, rather than the older Connection protocol. There is no other affect on the operation of the agents.

Note that you can't (currently) use the DID Exchange protocol to connect with any of the available mobile agents.

Endorser

This is described in Endorser.md

Run Askar Backend

This runs using the askar libraries instead of indy-sdk:

./run_demo faber --wallet-type askar

Mediation

To enable mediation, run the alice or faber demo with the --mediation option:

./run_demo faber --mediation

This will start up a second "mediator" agent and automatically set the alice/faber connection to use the mediator.

Multi-tenancy

To enable support for multi-tenancy, run the alice or faber demo with the --multitenant option:

./run_demo faber --multitenant

(This option can be used with both (or either) alice and/or faber.)

Multi-ledger

To enable multiple ledger mode, run the alice or faber demo with the --multi-ledger option:

./run_demo faber --multi-ledger

The configuration file for setting up multiple ledgers (for the demo) can be found at ./demo/multiple_ledger_config.yml.

You will see an additional menu option to create new sub-wallets (or they can be considered to be "virtual agents").

Faber:

    (1) Issue Credential
    (2) Send Proof Request
    (3) Send Message
    (4) Create New Invitation
    (W) Create and/or Enable Wallet
    (T) Toggle tracing on credential/proof exchange
    (X) Exit?

Alice:

    (3) Send Message
    (4) Input New Invitation
    (W) Create and/or Enable Wallet
    (X) Exit?

When you create a new wallet, you just need to provide the wallet name. (If you provide the name of an existing wallet then the controller will "activate" that wallet and make it the current wallet.)

[1/2/3/4/W/T/X] w

Enter wallet name: new_wallet_12

Faber      | Register or switch to wallet new_wallet_12
Faber      | Created new profile
Faber      | Profile backend: indy
Faber      | Profile name: new_wallet_12
Faber      | No public DID
... etc

Note that faber will create a public DID for this wallet, and will create a schema and credential definition.

Once you have created a new wallet, you must establish a connection between alice and faber (remember that this is a new "virtual agent" and doesn't know anything about connections established for other "agents").

In faber, create a new invitation:

[1/2/3/4/W/T/X] 4

(... creates a new invitation ...)

In alice, accept the invitation:

[1/2/3/4/W/T/X] 4

(... enter the new invitation string ...)

You can inspect the additional multi-tenancy admin API's (i.e. the "agency API" by opening either agent's swagger page in your browser:

Show me a screenshot - multi-tenancy via admin API Multi-tenancy via Admin API

Note that with multi-tenancy enabled:

  • The "base" wallet will have access to this new "agency API" - the agent's admin key, if enabled, must be provided in a header
  • "Base wallet" API calls are handled here
  • The "sub-wallets" will have access to the "normal" ACA-Py admin API - to identify the sub-wallet, a JWT token must be provided, this token is created upon creation of the new wallet (see: this code here)
  • "Sub-wallet" API calls are handled here

Documentation on ACA-Py's multi-tenancy support can be found here.

Multi-tenancy with Mediation!!!

There are two options for configuring mediation with multi-tenancy, documented here.

This demo implements option #2 - each sub-wallet is configured with a separate connection to the mediator.

Run the demo (Alice or Faber) specifying both options:

./run_demo faber --multitenant --mediation

This works exactly as the vanilla multi-tenancy, except that all connections are mediated.

Learning about the Alice/Faber code

These Alice and Faber scripts (in the demo/runners folder) implement the controller and run the agent as a sub-process (see the documentation for aca-py). The controller publishes a REST service to receive web hook callbacks from their agent. Note that this architecture, running the agent as a sub-process, is a variation on the documented architecture of running the controller and agent as separate processes/containers.

The controllers for this demo can be found in the alice.py and faber.py files. Alice and Faber are instances of the agent class found in agent.py.

OpenAPI (Swagger) Demo

Developing an ACA-Py controller is much like developing a web app that uses a REST API. As you develop, you will want an easy way to test out the behaviour of the API. That's where the industry-standard OpenAPI (aka Swagger) UI comes in. ACA-Py (optionally) exposes an OpenAPI UI in ACA-Py that you can use to learn the ins and outs of the API. This Aries OpenAPI demo shows how you can use the OpenAPI UI with an ACA-Py agent by walking through the connectiing, issuing a credential, and presenting a proof sequence.

Performance Demo

Another example in the demo/runners folder is performance.py, that is used to test out the performance of interacting agents. The script starts up agents for Alice and Faber, initializes them, and then runs through an interaction some number of times. In this case, Faber issues a credential to Alice 300 times.

To run the demo, make sure that you shut down any running Alice/Faber agents. Then, follow the same steps to start the Alice/Faber demo, but:

  • When starting the first agent, replace the agent name (e.g. faber) with performance.
  • Don't start the second agent (alice) at all.

The script starts both agents, runs the performance test, spits out performance results and shuts down the agents. Note that this is just one demonstration of how performance metrics tracking can be done with ACA-Py.

A second version of the performance test can be run by adding the parameter --routing to the invocation above. The parameter triggers the example to run with Alice using a routing agent such that all messages pass through the routing agent between Alice and Faber. This is a good, simple example of how routing can be implemented with DIDComm agents.

Coding Challenge: Adding ACME

Now that you have a solid foundation in using ACA-Py, time for a coding challenge. In this challenge, we extend the Alice-Faber command line demo by adding in ACME Corp, a place where Alice wants to work. The demo adds:

  • ACME inviting Alice to connect
  • ACME requesting a proof of her College degree
  • ACME issuing Alice a credential after she is hired.

The framework for the code is in the acme.py file, but the code is incomplete. Using the knowledge you gained from running demo and viewing the alice.py and faber.py code, fill in the blanks for the code. When you are ready to test your work:

  • Use the instructions above to start the Alice/Faber demo (above).
  • Start another terminal session and run the same commands as for "Alice", but replace "alice" with "acme".

All done? Checkout how we added the missing code segments here.