IWantToHelp

[Chasedog98]

Updated list of known Serial Commands:
M6030 "Photon/AA-TEST-PRINTS/_ShallowAnglesAATest_0X.photon" (starts a print file name imeddiatly)
M6032 "Photon/AA-TEST-PRINTS/_ShallowAnglesAATest_0X.photon" (Reads a File Into Memory to be started with M6045) R: (file length in bytes)
M20 (List SD Card)
M23 (Select File on SD Card)
M24 (Starts printing the M6032 open file on memory)
M25 (Pause Print)
M27 (Report SD print status) (M27 S4 - Report 4 seconds, M27 S0 - Stop reporting, M27 C - Report currently open filename)
M6045 I4000 "M24" (Waits the Delay set time and Starts Printing the M6032 open file on memory)
M30 (Delete file from SD Card)
M33 (Stops print)
M106 (Turn on Fan, Only works during print)
M107 (Turn off Fan, Only works during print)
M114 (Get current position)
M115 (Firmware Info)
M4001 (returns the configured stepper movement for all axis) R: (X:0.011430 Y:0.011430 Z:0.000625 E:0.001340 T:0/0/0/155/1 U:'GBK' B:1)
M105 (returns sensor temperatures) R: (ok T:161 /0 B:164 /0 @:0 B@:0)
M8512 "configFile.gcode" (Dumps the current config.gcode EEPROM data into a file)
G28 Z (Home Z Axis)
G0 Z10 (Move Z axis at max speed)
G0 Z10 F600 (Move Z axis at F speed)
M6040 I100 (Reboot I defines the delay before restart)
M7506 I636264 T0 //0; 1; color_flip, (Changes UI colours Negative/Positive/or switch watever its on)
M9005 '"Networkname","Password"'
G90 Absolute Positioning
G91 Incremental Positioning