AUR or Prebuilt repo please? #1

shadichy · 2021-12-07T02:42:21Z

yes.

This patch implements deduplication feature in zram. The purpose of this work is naturally to save amount of memory usage by zram. Android is one of the biggest users to use zram as swap and it's really important to save amount of memory usage. There is a paper that reports that duplication ratio of Android's memory content is rather high [1]. And, there is a similar work on zswap that also reports that experiments has shown that around 10-15% of pages stored in zswp are duplicates and deduplicate them provides some benefits [2]. Also, there is a different kind of workload that uses zram as blockdev and store build outputs into it to reduce wear-out problem of real blockdev. In this workload, deduplication hit is very high due to temporary files and intermediate object files. Detailed analysis is on the bottom of this description. Anyway, if we can detect duplicated content and avoid to store duplicated content at different memory space, we can save memory. This patch tries to do that. Implementation is almost simple and intuitive but I should note one thing about implementation detail. To check duplication, this patch uses checksum of the page and collision of this checksum could be possible. There would be many choices to handle this situation but this patch chooses to allow entry with duplicated checksum to be added to the hash, but, not to compare all entries with duplicated checksum when checking duplication. I guess that checksum collision is quite rare event and we don't need to pay any attention to such a case. Therefore, I decided the most simplest way to implement the feature. If there is a different opinion, I can accept and go that way. Following is the result of this patch. Test result #1 (Swap): Android Marshmallow, emulator, x86_64, Backporting to kernel v3.18 orig_data_size: 145297408 compr_data_size: 32408125 mem_used_total: 32276480 dup_data_size: 3188134 meta_data_size: 1444272 Last two metrics added to mm_stat are related to this work. First one, dup_data_size, is amount of saved memory by avoiding to store duplicated page. Later one, meta_data_size, is the amount of data structure to support deduplication. If dup > meta, we can judge that the patch improves memory usage. In Adnroid, we can save 5% of memory usage by this work. Test result #2 (Blockdev): build the kernel and store output to ext4 FS on zram <no-dedup> Elapsed time: 249 s mm_stat: 430845952 191014886 196898816 0 196898816 28320 0 0 0 <dedup> Elapsed time: 250 s mm_stat: 430505984 190971334 148365312 0 148365312 28404 0 47287038 3945792 There is no performance degradation and save 23% memory. Test result #3 (Blockdev): copy android build output dir(out/host) to ext4 FS on zram <no-dedup> Elapsed time: out/host: 88 s mm_stat: 8834420736 3658184579 3834208256 0 3834208256 32889 0 0 0 <dedup> Elapsed time: out/host: 100 s mm_stat: 8832929792 3657329322 2832015360 0 2832015360 32609 0 952568877 80880336 It shows performance degradation roughly 13% and save 24% memory. Maybe, it is due to overhead of calculating checksum and comparison. Test result #4 (Blockdev): copy android build output dir(out/target/common) to ext4 FS on zram <no-dedup> Elapsed time: out/host: 203 s mm_stat: 4041678848 2310355010 2346577920 0 2346582016 500 4 0 0 <dedup> Elapsed time: out/host: 201 s mm_stat: 4041666560 2310488276 1338150912 0 1338150912 476 0 989088794 24564336 Memory is saved by 42% and performance is the same. Even if there is overhead of calculating checksum and comparison, large hit ratio compensate it since hit leads to less compression attempt. I checked the detailed reason of savings on kernel build workload and there are some cases that deduplication happens. 1) *.cmd Build command is usually similar in one directory so content of these file are very similar. In my system, more than 789 lines in fs/ext4/.namei.o.cmd and fs/ext4/.inode.o.cmd are the same in 944 and 938 lines of the file, respectively. 2) intermediate object files built-in.o and temporary object file have the similar contents. More than 50% of fs/ext4/ext4.o is the same with fs/ext4/built-in.o. 3) vmlinux .tmp_vmlinux1 and .tmp_vmlinux2 and arch/x86/boo/compressed/vmlinux.bin have the similar contents. Android test has similar case that some of object files(.class and .so) are similar with another ones. (./host/linux-x86/lib/libartd.so and ./host/linux-x86-lib/libartd-comiler.so) Anyway, benefit seems to be largely dependent on the workload so following patch will make this feature optional. However, this feature can help some usecases so is deserved to be merged. [1]: MemScope: Analyzing Memory Duplication on Android Systems, dl.acm.org/citation.cfm?id=2797023 [2]: zswap: Optimize compressed pool memory utilization, lkml.kernel.org/r/1341407574.7551.1471584870761.JavaMail.weblogic@epwas3p2 Change-Id: I8fe80c956c33f88a6af337d50d9e210e5c35ce37 Reviewed-by: Sergey Senozhatsky <[email protected]> Acked-by: Minchan Kim <[email protected]> Signed-off-by: Joonsoo Kim <[email protected]> Link: https://lore.kernel.org/patchwork/patch/787162/ Patch-mainline: linux-kernel@ Thu, 11 May 2017 22:30:26 Signed-off-by: Charan Teja Reddy <[email protected]> Signed-off-by: Park Ju Hyung <[email protected]> Signed-off-by: Alexander Winkowski <[email protected]>

[ Upstream commit b70a99f ] Call trace seen when creating NPIV ports, only 32 out of 64 show online. stag work was not initialized for vport, hence initialize the stag work. WARNING: CPU: 8 PID: 645 at kernel/workqueue.c:1635 __queue_delayed_work+0x68/0x80 CPU: 8 PID: 645 Comm: kworker/8:1 Kdump: loaded Tainted: G IOE --------- -- 4.18.0-348.el8.x86_64 #1 Hardware name: Dell Inc. PowerEdge MX740c/0177V9, BIOS 2.12.2 07/09/2021 Workqueue: events fc_lport_timeout [libfc] RIP: 0010:__queue_delayed_work+0x68/0x80 Code: 89 b2 88 00 00 00 44 89 82 90 00 00 00 48 01 c8 48 89 42 50 41 81 f8 00 20 00 00 75 1d e9 60 24 07 00 44 89 c7 e9 98 f6 ff ff <0f> 0b eb c5 0f 0b eb a1 0f 0b eb a7 0f 0b eb ac 44 89 c6 e9 40 23 RSP: 0018:ffffae514bc3be40 EFLAGS: 00010006 RAX: ffff8d25d6143750 RBX: 0000000000000202 RCX: 0000000000000002 RDX: ffff8d2e31383748 RSI: ffff8d25c000d600 RDI: ffff8d2e31383788 RBP: ffff8d2e31380de0 R08: 0000000000002000 R09: ffff8d2e31383750 R10: ffffffffc0c957e0 R11: ffff8d2624800000 R12: ffff8d2e31380a58 R13: ffff8d2d915eb000 R14: ffff8d25c499b5c0 R15: ffff8d2e31380e18 FS: 0000000000000000(0000) GS:ffff8d2d1fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055fd0484b8b8 CR3: 00000008ffc10006 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: queue_delayed_work_on+0x36/0x40 qedf_elsct_send+0x57/0x60 [qedf] fc_lport_enter_flogi+0x90/0xc0 [libfc] fc_lport_timeout+0xb7/0x140 [libfc] process_one_work+0x1a7/0x360 ? create_worker+0x1a0/0x1a0 worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x116/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x35/0x40 ---[ end trace 008f00f722f2c2ff ]-- Initialize stag work for all the vports. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: Nilesh Javali <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 5239ab6 ] Hung task call trace was seen during LOGO processing. [ 974.309060] [0000:00:00.0]:[qedf_eh_device_reset:868]: 1:0:2:0: LUN RESET Issued... [ 974.309065] [0000:00:00.0]:[qedf_initiate_tmf:2422]: tm_flags 0x10 sc_cmd 00000000c16b930f op = 0x2a target_id = 0x2 lun=0 [ 974.309178] [0000:00:00.0]:[qedf_initiate_tmf:2431]: portid=016900 tm_flags =LUN RESET [ 974.309222] [0000:00:00.0]:[qedf_initiate_tmf:2438]: orig io_req = 00000000ec78df8f xid = 0x180 ref_cnt = 1. [ 974.309625] host1: rport 016900: Received LOGO request while in state Ready [ 974.309627] host1: rport 016900: Delete port [ 974.309642] host1: rport 016900: work event 3 [ 974.309644] host1: rport 016900: lld callback ev 3 [ 974.313243] [0000:61:00.2]:[qedf_execute_tmf:2383]:1: fcport is uploading, not executing flush. [ 974.313295] [0000:61:00.2]:[qedf_execute_tmf:2400]:1: task mgmt command success... [ 984.031088] INFO: task jbd2/dm-15-8:7645 blocked for more than 120 seconds. [ 984.031136] Not tainted 4.18.0-305.el8.x86_64 #1 [ 984.031166] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 984.031209] jbd2/dm-15-8 D 0 7645 2 0x80004080 [ 984.031212] Call Trace: [ 984.031222] __schedule+0x2c4/0x700 [ 984.031230] ? unfreeze_partials.isra.83+0x16e/0x1a0 [ 984.031233] ? bit_wait_timeout+0x90/0x90 [ 984.031235] schedule+0x38/0xa0 [ 984.031238] io_schedule+0x12/0x40 [ 984.031240] bit_wait_io+0xd/0x50 [ 984.031243] __wait_on_bit+0x6c/0x80 [ 984.031248] ? free_buffer_head+0x21/0x50 [ 984.031251] out_of_line_wait_on_bit+0x91/0xb0 [ 984.031257] ? init_wait_var_entry+0x50/0x50 [ 984.031268] jbd2_journal_commit_transaction+0x112e/0x19f0 [jbd2] [ 984.031280] kjournald2+0xbd/0x270 [jbd2] [ 984.031284] ? finish_wait+0x80/0x80 [ 984.031291] ? commit_timeout+0x10/0x10 [jbd2] [ 984.031294] kthread+0x116/0x130 [ 984.031300] ? kthread_flush_work_fn+0x10/0x10 [ 984.031305] ret_from_fork+0x1f/0x40 There was a ref count issue when LOGO is received during TMF. This leads to one of the I/Os hanging with the driver. Fix the ref count. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: Nilesh Javali <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 6a0c617 ] Fix the following false positive warning: ============================= WARNING: suspicious RCU usage 5.16.0-rc4+ #57 Not tainted ----------------------------- arch/x86/kvm/../../../virt/kvm/eventfd.c:484 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by fc_vcpu 0/330: #0: ffff8884835fc0b0 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x88/0x6f0 [kvm] #1: ffffc90004c0bb68 (&kvm->srcu){....}-{0:0}, at: vcpu_enter_guest+0x600/0x1860 [kvm] #2: ffffc90004c0c1d0 (&kvm->irq_srcu){....}-{0:0}, at: kvm_notify_acked_irq+0x36/0x180 [kvm] stack backtrace: CPU: 26 PID: 330 Comm: fc_vcpu 0 Not tainted 5.16.0-rc4+ Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x44/0x57 kvm_notify_acked_gsi+0x6b/0x70 [kvm] kvm_notify_acked_irq+0x8d/0x180 [kvm] kvm_ioapic_update_eoi+0x92/0x240 [kvm] kvm_apic_set_eoi_accelerated+0x2a/0xe0 [kvm] handle_apic_eoi_induced+0x3d/0x60 [kvm_intel] vmx_handle_exit+0x19c/0x6a0 [kvm_intel] vcpu_enter_guest+0x66e/0x1860 [kvm] kvm_arch_vcpu_ioctl_run+0x438/0x7f0 [kvm] kvm_vcpu_ioctl+0x38a/0x6f0 [kvm] __x64_sys_ioctl+0x89/0xc0 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Since kvm_unregister_irq_ack_notifier() does synchronize_srcu(&kvm->irq_srcu), kvm->irq_ack_notifier_list is protected by kvm->irq_srcu. In fact, kvm->irq_srcu SRCU read lock is held in kvm_notify_acked_irq(), making it a false positive warning. So use hlist_for_each_entry_srcu() instead of hlist_for_each_entry_rcu(). Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Hou Wenlong <[email protected]> Message-Id: <f98bac4f5052bad2c26df9ad50f7019e40434512.1643265976.git.houwenlong.hwl@antgroup.com> Signed-off-by: Paolo Bonzini <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit f53a2ce ] As explained in commits: 74b6d7d ("net: dsa: realtek: register the MDIO bus under devres") 5135e96 ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The mv88e6xxx is an MDIO device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the Marvell switch driver on shutdown. systemd-shutdown[1]: Powering off. mv88e6085 0x0000000008b96000:00 sw_gl0: Link is Down fsl-mc dpbp.9: Removing from iommu group 7 fsl-mc dpbp.8: Removing from iommu group 7 ------------[ cut here ]------------ kernel BUG at drivers/net/phy/mdio_bus.c:677! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.16.5-00040-gdc05f73788e5 #15 pc : mdiobus_free+0x44/0x50 lr : devm_mdiobus_free+0x10/0x20 Call trace: mdiobus_free+0x44/0x50 devm_mdiobus_free+0x10/0x20 devres_release_all+0xa0/0x100 __device_release_driver+0x190/0x220 device_release_driver_internal+0xac/0xb0 device_links_unbind_consumers+0xd4/0x100 __device_release_driver+0x4c/0x220 device_release_driver_internal+0xac/0xb0 device_links_unbind_consumers+0xd4/0x100 __device_release_driver+0x94/0x220 device_release_driver+0x28/0x40 bus_remove_device+0x118/0x124 device_del+0x174/0x420 fsl_mc_device_remove+0x24/0x40 __fsl_mc_device_remove+0xc/0x20 device_for_each_child+0x58/0xa0 dprc_remove+0x90/0xb0 fsl_mc_driver_remove+0x20/0x5c __device_release_driver+0x21c/0x220 device_release_driver+0x28/0x40 bus_remove_device+0x118/0x124 device_del+0x174/0x420 fsl_mc_bus_remove+0x80/0x100 fsl_mc_bus_shutdown+0xc/0x1c platform_shutdown+0x20/0x30 device_shutdown+0x154/0x330 kernel_power_off+0x34/0x6c __do_sys_reboot+0x15c/0x250 __arm64_sys_reboot+0x20/0x30 invoke_syscall.constprop.0+0x4c/0xe0 do_el0_svc+0x4c/0x150 el0_svc+0x24/0xb0 el0t_64_sync_handler+0xa8/0xb0 el0t_64_sync+0x178/0x17c So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The Marvell driver already has a good structure for mdiobus removal, so just plug in mdiobus_free and get rid of devres. Fixes: ac3a68d ("net: phy: don't abuse devres in devm_mdiobus_register()") Reported-by: Rafael Richter <[email protected]> Signed-off-by: Vladimir Oltean <[email protected]> Tested-by: Daniel Klauer <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 0764db9 upstream. Alexander reported a circular lock dependency revealed by the mmap1 ltp test: LOCKDEP_CIRCULAR (suite: ltp, case: mtest06 (mmap1)) WARNING: possible circular locking dependency detected 5.17.0-20220113.rc0.git0.f2211f194038.300.fc35.s390x+debug #1 Not tainted ------------------------------------------------------ mmap1/202299 is trying to acquire lock: 00000001892c0188 (css_set_lock){..-.}-{2:2}, at: obj_cgroup_release+0x4a/0xe0 but task is already holding lock: 00000000ca3b3818 (&sighand->siglock){-.-.}-{2:2}, at: force_sig_info_to_task+0x38/0x180 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&sighand->siglock){-.-.}-{2:2}: __lock_acquire+0x604/0xbd8 lock_acquire.part.0+0xe2/0x238 lock_acquire+0xb0/0x200 _raw_spin_lock_irqsave+0x6a/0xd8 __lock_task_sighand+0x90/0x190 cgroup_freeze_task+0x2e/0x90 cgroup_migrate_execute+0x11c/0x608 cgroup_update_dfl_csses+0x246/0x270 cgroup_subtree_control_write+0x238/0x518 kernfs_fop_write_iter+0x13e/0x1e0 new_sync_write+0x100/0x190 vfs_write+0x22c/0x2d8 ksys_write+0x6c/0xf8 __do_syscall+0x1da/0x208 system_call+0x82/0xb0 -> #0 (css_set_lock){..-.}-{2:2}: check_prev_add+0xe0/0xed8 validate_chain+0x736/0xb20 __lock_acquire+0x604/0xbd8 lock_acquire.part.0+0xe2/0x238 lock_acquire+0xb0/0x200 _raw_spin_lock_irqsave+0x6a/0xd8 obj_cgroup_release+0x4a/0xe0 percpu_ref_put_many.constprop.0+0x150/0x168 drain_obj_stock+0x94/0xe8 refill_obj_stock+0x94/0x278 obj_cgroup_charge+0x164/0x1d8 kmem_cache_alloc+0xac/0x528 __sigqueue_alloc+0x150/0x308 __send_signal+0x260/0x550 send_signal+0x7e/0x348 force_sig_info_to_task+0x104/0x180 force_sig_fault+0x48/0x58 __do_pgm_check+0x120/0x1f0 pgm_check_handler+0x11e/0x180 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&sighand->siglock); lock(css_set_lock); lock(&sighand->siglock); lock(css_set_lock); *** DEADLOCK *** 2 locks held by mmap1/202299: #0: 00000000ca3b3818 (&sighand->siglock){-.-.}-{2:2}, at: force_sig_info_to_task+0x38/0x180 #1: 00000001892ad560 (rcu_read_lock){....}-{1:2}, at: percpu_ref_put_many.constprop.0+0x0/0x168 stack backtrace: CPU: 15 PID: 202299 Comm: mmap1 Not tainted 5.17.0-20220113.rc0.git0.f2211f194038.300.fc35.s390x+debug #1 Hardware name: IBM 3906 M04 704 (LPAR) Call Trace: dump_stack_lvl+0x76/0x98 check_noncircular+0x136/0x158 check_prev_add+0xe0/0xed8 validate_chain+0x736/0xb20 __lock_acquire+0x604/0xbd8 lock_acquire.part.0+0xe2/0x238 lock_acquire+0xb0/0x200 _raw_spin_lock_irqsave+0x6a/0xd8 obj_cgroup_release+0x4a/0xe0 percpu_ref_put_many.constprop.0+0x150/0x168 drain_obj_stock+0x94/0xe8 refill_obj_stock+0x94/0x278 obj_cgroup_charge+0x164/0x1d8 kmem_cache_alloc+0xac/0x528 __sigqueue_alloc+0x150/0x308 __send_signal+0x260/0x550 send_signal+0x7e/0x348 force_sig_info_to_task+0x104/0x180 force_sig_fault+0x48/0x58 __do_pgm_check+0x120/0x1f0 pgm_check_handler+0x11e/0x180 INFO: lockdep is turned off. In this example a slab allocation from __send_signal() caused a refilling and draining of a percpu objcg stock, resulted in a releasing of another non-related objcg. Objcg release path requires taking the css_set_lock, which is used to synchronize objcg lists. This can create a circular dependency with the sighandler lock, which is taken with the locked css_set_lock by the freezer code (to freeze a task). In general it seems that using css_set_lock to synchronize objcg lists makes any slab allocations and deallocation with the locked css_set_lock and any intervened locks risky. To fix the problem and make the code more robust let's stop using css_set_lock to synchronize objcg lists and use a new dedicated spinlock instead. Link: https://lkml.kernel.org/r/[email protected] Fixes: bf4f059 ("mm: memcg/slab: obj_cgroup API") Signed-off-by: Roman Gushchin <[email protected]> Reported-by: Alexander Egorenkov <[email protected]> Tested-by: Alexander Egorenkov <[email protected]> Reviewed-by: Waiman Long <[email protected]> Acked-by: Tejun Heo <[email protected]> Reviewed-by: Shakeel Butt <[email protected]> Reviewed-by: Jeremy Linton <[email protected]> Tested-by: Jeremy Linton <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 24d7275 upstream. The syzbot reported the below BUG: kernel BUG at include/linux/page-flags.h:785! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 4392 Comm: syz-executor560 Not tainted 5.16.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:PageDoubleMap include/linux/page-flags.h:785 [inline] RIP: 0010:__page_mapcount+0x2d2/0x350 mm/util.c:744 Call Trace: page_mapcount include/linux/mm.h:837 [inline] smaps_account+0x470/0xb10 fs/proc/task_mmu.c:466 smaps_pte_entry fs/proc/task_mmu.c:538 [inline] smaps_pte_range+0x611/0x1250 fs/proc/task_mmu.c:601 walk_pmd_range mm/pagewalk.c:128 [inline] walk_pud_range mm/pagewalk.c:205 [inline] walk_p4d_range mm/pagewalk.c:240 [inline] walk_pgd_range mm/pagewalk.c:277 [inline] __walk_page_range+0xe23/0x1ea0 mm/pagewalk.c:379 walk_page_vma+0x277/0x350 mm/pagewalk.c:530 smap_gather_stats.part.0+0x148/0x260 fs/proc/task_mmu.c:768 smap_gather_stats fs/proc/task_mmu.c:741 [inline] show_smap+0xc6/0x440 fs/proc/task_mmu.c:822 seq_read_iter+0xbb0/0x1240 fs/seq_file.c:272 seq_read+0x3e0/0x5b0 fs/seq_file.c:162 vfs_read+0x1b5/0x600 fs/read_write.c:479 ksys_read+0x12d/0x250 fs/read_write.c:619 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae The reproducer was trying to read /proc/$PID/smaps when calling MADV_FREE at the mean time. MADV_FREE may split THPs if it is called for partial THP. It may trigger the below race: CPU A CPU B ----- ----- smaps walk: MADV_FREE: page_mapcount() PageCompound() split_huge_page() page = compound_head(page) PageDoubleMap(page) When calling PageDoubleMap() this page is not a tail page of THP anymore so the BUG is triggered. This could be fixed by elevated refcount of the page before calling mapcount, but that would prevent it from counting migration entries, and it seems overkilling because the race just could happen when PMD is split so all PTE entries of tail pages are actually migration entries, and smaps_account() does treat migration entries as mapcount == 1 as Kirill pointed out. Add a new parameter for smaps_account() to tell this entry is migration entry then skip calling page_mapcount(). Don't skip getting mapcount for device private entries since they do track references with mapcount. Pagemap also has the similar issue although it was not reported. Fixed it as well. [[email protected]: v4] Link: https://lkml.kernel.org/r/[email protected] [[email protected]: avoid unused variable warning in pagemap_pmd_range()] Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: e9b61f1 ("thp: reintroduce split_huge_page()") Signed-off-by: Yang Shi <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Reported-by: [email protected] Acked-by: David Hildenbrand <[email protected]> Cc: "Kirill A. Shutemov" <[email protected]> Cc: Jann Horn <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Alexey Dobriyan <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 2787710 upstream. I'm was on the receiving end of a lockdep splat from this driver and after scratching my head I couldn't be entirely sure it was a false positive given we would also have to think about whether the regulator locking is safe (since the notifier is called whilst holding regulator locks which are also needed for regulator_is_enabled() ). Regardless of whether it is a real bug or not, the mutex isn't needed. We can use reference counting tricks instead to avoid races with the notifier calls. The observed splat follows: ------------------------------------------------------ kworker/u16:3/127 is trying to acquire lock: ffff00008021fb20 (&ihid_goodix->regulator_mutex){+.+.}-{4:4}, at: ihid_goodix_vdd_notify+0x30/0x94 but task is already holding lock: ffff0000835c60c0 (&(&rdev->notifier)->rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x30/0x70 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&(&rdev->notifier)->rwsem){++++}-{4:4}: down_write+0x68/0x8c blocking_notifier_chain_register+0x54/0x70 regulator_register_notifier+0x1c/0x24 devm_regulator_register_notifier+0x58/0x98 i2c_hid_of_goodix_probe+0xdc/0x158 i2c_device_probe+0x25d/0x270 really_probe+0x174/0x2cc __driver_probe_device+0xc0/0xd8 driver_probe_device+0x50/0xe4 __device_attach_driver+0xa8/0xc0 bus_for_each_drv+0x9c/0xc0 __device_attach_async_helper+0x6c/0xbc async_run_entry_fn+0x38/0x100 process_one_work+0x294/0x438 worker_thread+0x180/0x258 kthread+0x120/0x130 ret_from_fork+0x10/0x20 -> #0 (&ihid_goodix->regulator_mutex){+.+.}-{4:4}: __lock_acquire+0xd24/0xfe8 lock_acquire+0x288/0x2f4 __mutex_lock+0xa0/0x338 mutex_lock_nested+0x3c/0x5c ihid_goodix_vdd_notify+0x30/0x94 notifier_call_chain+0x6c/0x8c blocking_notifier_call_chain+0x48/0x70 _notifier_call_chain.isra.0+0x18/0x20 _regulator_enable+0xc0/0x178 regulator_enable+0x40/0x7c goodix_i2c_hid_power_up+0x18/0x20 i2c_hid_core_power_up.isra.0+0x1c/0x2c i2c_hid_core_probe+0xd8/0x3d4 i2c_hid_of_goodix_probe+0x14c/0x158 i2c_device_probe+0x25c/0x270 really_probe+0x174/0x2cc __driver_probe_device+0xc0/0xd8 driver_probe_device+0x50/0xe4 __device_attach_driver+0xa8/0xc0 bus_for_each_drv+0x9c/0xc0 __device_attach_async_helper+0x6c/0xbc async_run_entry_fn+0x38/0x100 process_one_work+0x294/0x438 worker_thread+0x180/0x258 kthread+0x120/0x130 ret_from_fork+0x10/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(&rdev->notifier)->rwsem); lock(&ihid_goodix->regulator_mutex); lock(&(&rdev->notifier)->rwsem); lock(&ihid_goodix->regulator_mutex); *** DEADLOCK *** Signed-off-by: Daniel Thompson <[email protected]> Fixes: 18eeef4 ("HID: i2c-hid: goodix: Tie the reset line to true state of the regulator") Reviewed-by: Douglas Anderson <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 17da2d5 ] As reported: [ 256.104522] ====================================================== [ 256.113783] WARNING: possible circular locking dependency detected [ 256.120093] 5.16.0-rc6-yocto-standard+ #99 Not tainted [ 256.125362] ------------------------------------------------------ [ 256.131673] intel-speed-sel/844 is trying to acquire lock: [ 256.137290] ffffffffc036f0d0 (punit_misc_dev_lock){+.+.}-{3:3}, at: isst_if_open+0x18/0x90 [isst_if_common] [ 256.147171] [ 256.147171] but task is already holding lock: [ 256.153135] ffffffff8ee7cb50 (misc_mtx){+.+.}-{3:3}, at: misc_open+0x2a/0x170 [ 256.160407] [ 256.160407] which lock already depends on the new lock. [ 256.160407] [ 256.168712] [ 256.168712] the existing dependency chain (in reverse order) is: [ 256.176327] [ 256.176327] -> #1 (misc_mtx){+.+.}-{3:3}: [ 256.181946] lock_acquire+0x1e6/0x330 [ 256.186265] __mutex_lock+0x9b/0x9b0 [ 256.190497] mutex_lock_nested+0x1b/0x20 [ 256.195075] misc_register+0x32/0x1a0 [ 256.199390] isst_if_cdev_register+0x65/0x180 [isst_if_common] [ 256.205878] isst_if_probe+0x144/0x16e [isst_if_mmio] ... [ 256.241976] [ 256.241976] -> #0 (punit_misc_dev_lock){+.+.}-{3:3}: [ 256.248552] validate_chain+0xbc6/0x1750 [ 256.253131] __lock_acquire+0x88c/0xc10 [ 256.257618] lock_acquire+0x1e6/0x330 [ 256.261933] __mutex_lock+0x9b/0x9b0 [ 256.266165] mutex_lock_nested+0x1b/0x20 [ 256.270739] isst_if_open+0x18/0x90 [isst_if_common] [ 256.276356] misc_open+0x100/0x170 [ 256.280409] chrdev_open+0xa5/0x1e0 ... The call sequence suggested that misc_device /dev file can be opened before misc device is yet to be registered, which is done only once. Here punit_misc_dev_lock was used as common lock, to protect the registration by multiple ISST HW drivers, one time setup, prevent duplicate registry of misc device and prevent load/unload when device is open. We can split into locks: - One which just prevent duplicate call to misc_register() and one time setup. Also never call again if the misc_register() failed or required one time setup is failed. This lock is not shared with any misc device callbacks. - The other lock protects registry, load and unload of HW drivers. Sequence in isst_if_cdev_register() - Register callbacks under punit_misc_dev_open_lock - Call isst_misc_reg() which registers misc_device on the first registry which is under punit_misc_dev_reg_lock, which is not shared with callbacks. Sequence in isst_if_cdev_unregister Just opposite of isst_if_cdev_register Reported-and-tested-by: Liwei Song <[email protected]> Signed-off-by: Srinivas Pandruvada <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 26394fc upstream. Some time ago 8965779 ("ipv6,mcast: always hold idev->lock before mca_lock") switched ipv6_get_lladdr() to __ipv6_get_lladdr(), which is rcu-unsafe version. That was OK, because idev->lock was held for these codepaths. In 88e2ca3 ("mld: convert ifmcaddr6 to RCU") these external locks were removed, so we probably need to restore the original rcu-safe call. Otherwise, we occasionally get a machine crashed/stalled with the following in dmesg: [ 3405.966610][T230589] general protection fault, probably for non-canonical address 0xdead00000000008c: 0000 [#1] SMP NOPTI [ 3405.982083][T230589] CPU: 44 PID: 230589 Comm: kworker/44:3 Tainted: G O 5.15.19-cloudflare-2022.2.1 #1 [ 3405.998061][T230589] Hardware name: SUPA-COOL-SERV [ 3406.009552][T230589] Workqueue: mld mld_ifc_work [ 3406.017224][T230589] RIP: 0010:__ipv6_get_lladdr+0x34/0x60 [ 3406.025780][T230589] Code: 57 10 48 83 c7 08 48 89 e5 48 39 d7 74 3e 48 8d 82 38 ff ff ff eb 13 48 8b 90 d0 00 00 00 48 8d 82 38 ff ff ff 48 39 d7 74 22 <66> 83 78 32 20 77 1b 75 e4 89 ca 23 50 2c 75 dd 48 8b 50 08 48 8b [ 3406.055748][T230589] RSP: 0018:ffff94e4b3fc3d10 EFLAGS: 00010202 [ 3406.065617][T230589] RAX: dead00000000005a RBX: ffff94e4b3fc3d30 RCX: 0000000000000040 [ 3406.077477][T230589] RDX: dead000000000122 RSI: ffff94e4b3fc3d30 RDI: ffff8c3a31431008 [ 3406.089389][T230589] RBP: ffff94e4b3fc3d10 R08: 0000000000000000 R09: 0000000000000000 [ 3406.101445][T230589] R10: ffff8c3a31430000 R11: 000000000000000b R12: ffff8c2c37887100 [ 3406.113553][T230589] R13: ffff8c3a39537000 R14: 00000000000005dc R15: ffff8c3a31431000 [ 3406.125730][T230589] FS: 0000000000000000(0000) GS:ffff8c3b9fc80000(0000) knlGS:0000000000000000 [ 3406.138992][T230589] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3406.149895][T230589] CR2: 00007f0dfea1db60 CR3: 000000387b5f2000 CR4: 0000000000350ee0 [ 3406.162421][T230589] Call Trace: [ 3406.170235][T230589] <TASK> [ 3406.177736][T230589] mld_newpack+0xfe/0x1a0 [ 3406.186686][T230589] add_grhead+0x87/0xa0 [ 3406.195498][T230589] add_grec+0x485/0x4e0 [ 3406.204310][T230589] ? newidle_balance+0x126/0x3f0 [ 3406.214024][T230589] mld_ifc_work+0x15d/0x450 [ 3406.223279][T230589] process_one_work+0x1e6/0x380 [ 3406.232982][T230589] worker_thread+0x50/0x3a0 [ 3406.242371][T230589] ? rescuer_thread+0x360/0x360 [ 3406.252175][T230589] kthread+0x127/0x150 [ 3406.261197][T230589] ? set_kthread_struct+0x40/0x40 [ 3406.271287][T230589] ret_from_fork+0x22/0x30 [ 3406.280812][T230589] </TASK> [ 3406.288937][T230589] Modules linked in: ... [last unloaded: kheaders] [ 3406.476714][T230589] ---[ end trace 3525a7655f2f3b9e ]--- Fixes: 88e2ca3 ("mld: convert ifmcaddr6 to RCU") Reported-by: David Pinilla Caparros <[email protected]> Signed-off-by: Ignat Korchagin <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

…ction commit ddc204b upstream. I was made aware of the following lockdep splat: [ 2516.308763] ===================================================== [ 2516.309085] WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected [ 2516.309433] 5.14.0-51.el9.aarch64+debug #1 Not tainted [ 2516.309703] ----------------------------------------------------- [ 2516.310149] stress-ng/153663 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 2516.310512] ffff0000e422b198 (&newf->file_lock){+.+.}-{2:2}, at: fd_install+0x368/0x4f0 [ 2516.310944] and this task is already holding: [ 2516.311248] ffff0000c08140d8 (&sighand->siglock){-.-.}-{2:2}, at: copy_process+0x1e2c/0x3e80 [ 2516.311804] which would create a new lock dependency: [ 2516.312066] (&sighand->siglock){-.-.}-{2:2} -> (&newf->file_lock){+.+.}-{2:2} [ 2516.312446] but this new dependency connects a HARDIRQ-irq-safe lock: [ 2516.312983] (&sighand->siglock){-.-.}-{2:2} : [ 2516.330700] Possible interrupt unsafe locking scenario: [ 2516.331075] CPU0 CPU1 [ 2516.331328] ---- ---- [ 2516.331580] lock(&newf->file_lock); [ 2516.331790] local_irq_disable(); [ 2516.332231] lock(&sighand->siglock); [ 2516.332579] lock(&newf->file_lock); [ 2516.332922] <Interrupt> [ 2516.333069] lock(&sighand->siglock); [ 2516.333291] *** DEADLOCK *** [ 2516.389845] stack backtrace: [ 2516.390101] CPU: 3 PID: 153663 Comm: stress-ng Kdump: loaded Not tainted 5.14.0-51.el9.aarch64+debug #1 [ 2516.390756] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 2516.391155] Call trace: [ 2516.391302] dump_backtrace+0x0/0x3e0 [ 2516.391518] show_stack+0x24/0x30 [ 2516.391717] dump_stack_lvl+0x9c/0xd8 [ 2516.391938] dump_stack+0x1c/0x38 [ 2516.392247] print_bad_irq_dependency+0x620/0x710 [ 2516.392525] check_irq_usage+0x4fc/0x86c [ 2516.392756] check_prev_add+0x180/0x1d90 [ 2516.392988] validate_chain+0x8e0/0xee0 [ 2516.393215] __lock_acquire+0x97c/0x1e40 [ 2516.393449] lock_acquire.part.0+0x240/0x570 [ 2516.393814] lock_acquire+0x90/0xb4 [ 2516.394021] _raw_spin_lock+0xe8/0x154 [ 2516.394244] fd_install+0x368/0x4f0 [ 2516.394451] copy_process+0x1f5c/0x3e80 [ 2516.394678] kernel_clone+0x134/0x660 [ 2516.394895] __do_sys_clone3+0x130/0x1f4 [ 2516.395128] __arm64_sys_clone3+0x5c/0x7c [ 2516.395478] invoke_syscall.constprop.0+0x78/0x1f0 [ 2516.395762] el0_svc_common.constprop.0+0x22c/0x2c4 [ 2516.396050] do_el0_svc+0xb0/0x10c [ 2516.396252] el0_svc+0x24/0x34 [ 2516.396436] el0t_64_sync_handler+0xa4/0x12c [ 2516.396688] el0t_64_sync+0x198/0x19c [ 2517.491197] NET: Registered PF_ATMPVC protocol family [ 2517.491524] NET: Registered PF_ATMSVC protocol family [ 2591.991877] sched: RT throttling activated One way to solve this problem is to move the fd_install() call out of the sighand->siglock critical section. Before commit 6fd2fe4 ("copy_process(): don't use ksys_close() on cleanups"), the pidfd installation was done without holding both the task_list lock and the sighand->siglock. Obviously, holding these two locks are not really needed to protect the fd_install() call. So move the fd_install() call down to after the releases of both locks. Link: https://lore.kernel.org/r/[email protected] Fixes: 6fd2fe4 ("copy_process(): don't use ksys_close() on cleanups") Reviewed-by: "Eric W. Biederman" <[email protected]> Signed-off-by: Waiman Long <[email protected]> Signed-off-by: Christian Brauner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 0c98294 upstream. while mounting the crafted image, out-of-bounds access happens: [350.429619] UBSAN: array-index-out-of-bounds in fs/btrfs/struct-funcs.c:161:1 [350.429636] index 1048096 is out of range for type 'page *[16]' [350.429650] CPU: 0 PID: 9 Comm: kworker/u8:1 Not tainted 5.16.0-rc4 #1 [350.429652] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 [350.429653] Workqueue: btrfs-endio-meta btrfs_work_helper [btrfs] [350.429772] Call Trace: [350.429774] <TASK> [350.429776] dump_stack_lvl+0x47/0x5c [350.429780] ubsan_epilogue+0x5/0x50 [350.429786] __ubsan_handle_out_of_bounds+0x66/0x70 [350.429791] btrfs_get_16+0xfd/0x120 [btrfs] [350.429832] check_leaf+0x754/0x1a40 [btrfs] [350.429874] ? filemap_read+0x34a/0x390 [350.429878] ? load_balance+0x175/0xfc0 [350.429881] validate_extent_buffer+0x244/0x310 [btrfs] [350.429911] btrfs_validate_metadata_buffer+0xf8/0x100 [btrfs] [350.429935] end_bio_extent_readpage+0x3af/0x850 [btrfs] [350.429969] ? newidle_balance+0x259/0x480 [350.429972] end_workqueue_fn+0x29/0x40 [btrfs] [350.429995] btrfs_work_helper+0x71/0x330 [btrfs] [350.430030] ? __schedule+0x2fb/0xa40 [350.430033] process_one_work+0x1f6/0x400 [350.430035] ? process_one_work+0x400/0x400 [350.430036] worker_thread+0x2d/0x3d0 [350.430037] ? process_one_work+0x400/0x400 [350.430038] kthread+0x165/0x190 [350.430041] ? set_kthread_struct+0x40/0x40 [350.430043] ret_from_fork+0x1f/0x30 [350.430047] </TASK> [350.430077] BTRFS warning (device loop0): bad eb member start: ptr 0xffe20f4e start 20975616 member offset 4293005178 size 2 check_leaf() is checking the leaf: corrupt leaf: root=4 block=29396992 slot=1, bad key order, prev (16140901064495857664 1 0) current (1 204 12582912) leaf 29396992 items 6 free space 3565 generation 6 owner DEV_TREE leaf 29396992 flags 0x1(WRITTEN) backref revision 1 fs uuid a62e00e8-e94e-4200-8217-12444de93c2e chunk uuid cecbd0f7-9ca0-441e-ae9f-f782f9732bd8 item 0 key (16140901064495857664 INODE_ITEM 0) itemoff 3955 itemsize 40 generation 0 transid 0 size 0 nbytes 17592186044416 block group 0 mode 52667 links 33 uid 0 gid 2104132511 rdev 94223634821136 sequence 100305 flags 0x2409000(none) atime 0.0 (1970-01-01 08:00:00) ctime 2973280098083405823.4294967295 (-269783007-01-01 21:37:03) mtime 18446744071572723616.4026825121 (1902-04-16 12:40:00) otime 9249929404488876031.4294967295 (622322949-04-16 04:25:58) item 1 key (1 DEV_EXTENT 12582912) itemoff 3907 itemsize 48 dev extent chunk_tree 3 chunk_objectid 256 chunk_offset 12582912 length 8388608 chunk_tree_uuid cecbd0f7-9ca0-441e-ae9f-f782f9732bd8 The corrupted leaf of device tree has an inode item. The leaf passed checksum and others checks in validate_extent_buffer until check_leaf_item(). Because of the key type BTRFS_INODE_ITEM, check_inode_item() is called even we are in the device tree. Since the item offset + sizeof(struct btrfs_inode_item) > eb->len, out-of-bounds access is triggered. The item end vs leaf boundary check has been done before check_leaf_item(), so fix it by checking item size in check_inode_item() before access of the inode item in extent buffer. Other check functions except check_dev_item() in check_leaf_item() have their item size checks. The commit for check_dev_item() is followed. No regression observed during running fstests. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215299 CC: [email protected] # 5.10+ CC: Wenqing Liu <[email protected]> Signed-off-by: Su Yue <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 1b5f517 upstream. If an attempt is made to a sensor with a thermal zone and it fails, the call to devm_thermal_zone_of_sensor_register() may return -ENODEV. This may result in crashes similar to the following. Unable to handle kernel NULL pointer dereference at virtual address 00000000000003cd ... Internal error: Oops: 96000021 [#1] PREEMPT SMP ... pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mutex_lock+0x18/0x60 lr : thermal_zone_device_update+0x40/0x2e0 sp : ffff800014c4fc60 x29: ffff800014c4fc60 x28: ffff365ee3f6e000 x27: ffffdde218426790 x26: ffff365ee3f6e000 x25: 0000000000000000 x24: ffff365ee3f6e000 x23: ffffdde218426870 x22: ffff365ee3f6e000 x21: 00000000000003cd x20: ffff365ee8bf3308 x19: ffffffffffffffed x18: 0000000000000000 x17: ffffdde21842689c x16: ffffdde1cb7a0b7c x15: 0000000000000040 x14: ffffdde21a4889a0 x13: 0000000000000228 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000001120000 x7 : 0000000000000001 x6 : 0000000000000000 x5 : 0068000878e20f07 x4 : 0000000000000000 x3 : 00000000000003cd x2 : ffff365ee3f6e000 x1 : 0000000000000000 x0 : 00000000000003cd Call trace: mutex_lock+0x18/0x60 hwmon_notify_event+0xfc/0x110 0xffffdde1cb7a0a90 0xffffdde1cb7a0b7c irq_thread_fn+0x2c/0xa0 irq_thread+0x134/0x240 kthread+0x178/0x190 ret_from_fork+0x10/0x20 Code: d503201f d503201f d2800001 aa0103e4 (c8e47c02) Jon Hunter reports that the exact call sequence is: hwmon_notify_event() --> hwmon_thermal_notify() --> thermal_zone_device_update() --> update_temperature() --> mutex_lock() The hwmon core needs to handle all errors returned from calls to devm_thermal_zone_of_sensor_register(). If the call fails with -ENODEV, report that the sensor was not attached to a thermal zone but continue to register the hwmon device. Reported-by: Jon Hunter <[email protected]> Cc: Dmitry Osipenko <[email protected]> Fixes: 1597b37 ("hwmon: Add notification support") Reviewed-by: Dmitry Osipenko <[email protected]> Tested-by: Jon Hunter <[email protected]> Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 741b23a upstream. Compressed length can be corrupted to be a lot larger than memory we have allocated for buffer. This will cause memcpy in copy_compressed_segment to write outside of allocated memory. This mostly results in stuck read syscall but sometimes when using btrfs send can get #GP kernel: general protection fault, probably for non-canonical address 0x841551d5c1000: 0000 [#1] PREEMPT SMP NOPTI kernel: CPU: 17 PID: 264 Comm: kworker/u256:7 Tainted: P OE 5.17.0-rc2-1 #12 kernel: Workqueue: btrfs-endio btrfs_work_helper [btrfs] kernel: RIP: 0010:lzo_decompress_bio (./include/linux/fortify-string.h:225 fs/btrfs/lzo.c:322 fs/btrfs/lzo.c:394) btrfs Code starting with the faulting instruction =========================================== 0:* 48 8b 06 mov (%rsi),%rax <-- trapping instruction 3: 48 8d 79 08 lea 0x8(%rcx),%rdi 7: 48 83 e7 f8 and $0xfffffffffffffff8,%rdi b: 48 89 01 mov %rax,(%rcx) e: 44 89 f0 mov %r14d,%eax 11: 48 8b 54 06 f8 mov -0x8(%rsi,%rax,1),%rdx kernel: RSP: 0018:ffffb110812efd50 EFLAGS: 00010212 kernel: RAX: 0000000000001000 RBX: 000000009ca264c8 RCX: ffff98996e6d8ff8 kernel: RDX: 0000000000000064 RSI: 000841551d5c1000 RDI: ffffffff9500435d kernel: RBP: ffff989a3be856c0 R08: 0000000000000000 R09: 0000000000000000 kernel: R10: 0000000000000000 R11: 0000000000001000 R12: ffff98996e6d8000 kernel: R13: 0000000000000008 R14: 0000000000001000 R15: 000841551d5c1000 kernel: FS: 0000000000000000(0000) GS:ffff98a09d640000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 00001e9f984d9ea8 CR3: 000000014971a000 CR4: 00000000003506e0 kernel: Call Trace: kernel: <TASK> kernel: end_compressed_bio_read (fs/btrfs/compression.c:104 fs/btrfs/compression.c:1363 fs/btrfs/compression.c:323) btrfs kernel: end_workqueue_fn (fs/btrfs/disk-io.c:1923) btrfs kernel: btrfs_work_helper (fs/btrfs/async-thread.c:326) btrfs kernel: process_one_work (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:212 ./include/trace/events/workqueue.h:108 kernel/workqueue.c:2312) kernel: worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2455) kernel: ? process_one_work (kernel/workqueue.c:2397) kernel: kthread (kernel/kthread.c:377) kernel: ? kthread_complete_and_exit (kernel/kthread.c:332) kernel: ret_from_fork (arch/x86/entry/entry_64.S:301) kernel: </TASK> CC: [email protected] # 4.9+ Signed-off-by: Dāvis Mosāns <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 22e2100 upstream. The trace_hardirqs_{on,off}() require the caller to setup frame pointer properly. This because these two functions use macro 'CALLER_ADDR1' (aka. __builtin_return_address(1)) to acquire caller info. If the $fp is used for other purpose, the code generated this macro (as below) could trigger memory access fault. 0xffffffff8011510e <+80>: ld a1,-16(s0) 0xffffffff80115112 <+84>: ld s2,-8(a1) # <-- paging fault here The oops message during booting if compiled with 'irqoff' tracer enabled: [ 0.039615][ T0] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000f8 [ 0.041925][ T0] Oops [#1] [ 0.042063][ T0] Modules linked in: [ 0.042864][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.17.0-rc1-00233-g9a20c48d1ed2 #29 [ 0.043568][ T0] Hardware name: riscv-virtio,qemu (DT) [ 0.044343][ T0] epc : trace_hardirqs_on+0x56/0xe2 [ 0.044601][ T0] ra : restore_all+0x12/0x6e [ 0.044721][ T0] epc : ffffffff80126a5c ra : ffffffff80003b94 sp : ffffffff81403db0 [ 0.044801][ T0] gp : ffffffff8163acd8 tp : ffffffff81414880 t0 : 0000000000000020 [ 0.044882][ T0] t1 : 0098968000000000 t2 : 0000000000000000 s0 : ffffffff81403de0 [ 0.044967][ T0] s1 : 0000000000000000 a0 : 0000000000000001 a1 : 0000000000000100 [ 0.045046][ T0] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.045124][ T0] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000054494d45 [ 0.045210][ T0] s2 : ffffffff80003b94 s3 : ffffffff81a8f1b0 s4 : ffffffff80e27b50 [ 0.045289][ T0] s5 : ffffffff81414880 s6 : ffffffff8160fa00 s7 : 00000000800120e8 [ 0.045389][ T0] s8 : 0000000080013100 s9 : 000000000000007f s10: 0000000000000000 [ 0.045474][ T0] s11: 0000000000000000 t3 : 7fffffffffffffff t4 : 0000000000000000 [ 0.045548][ T0] t5 : 0000000000000000 t6 : ffffffff814aa368 [ 0.045620][ T0] status: 0000000200000100 badaddr: 00000000000000f8 cause: 000000000000000d [ 0.046402][ T0] [<ffffffff80003b94>] restore_all+0x12/0x6e This because the $fp(aka. $s0) register is not used as frame pointer in the assembly entry code. resume_kernel: REG_L s0, TASK_TI_PREEMPT_COUNT(tp) bnez s0, restore_all REG_L s0, TASK_TI_FLAGS(tp) andi s0, s0, _TIF_NEED_RESCHED beqz s0, restore_all call preempt_schedule_irq j restore_all To fix above issue, here we add one extra level wrapper for function trace_hardirqs_{on,off}() so they can be safely called by low level entry code. Signed-off-by: Changbin Du <[email protected]> Fixes: 3c46979 ("riscv: Enable LOCKDEP_SUPPORT & fixup TRACE_IRQFLAGS_SUPPORT") Cc: [email protected] Signed-off-by: Palmer Dabbelt <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

This patch implements deduplication feature in zram. The purpose of this work is naturally to save amount of memory usage by zram. Android is one of the biggest users to use zram as swap and it's really important to save amount of memory usage. There is a paper that reports that duplication ratio of Android's memory content is rather high [1]. And, there is a similar work on zswap that also reports that experiments has shown that around 10-15% of pages stored in zswp are duplicates and deduplicate them provides some benefits [2]. Also, there is a different kind of workload that uses zram as blockdev and store build outputs into it to reduce wear-out problem of real blockdev. In this workload, deduplication hit is very high due to temporary files and intermediate object files. Detailed analysis is on the bottom of this description. Anyway, if we can detect duplicated content and avoid to store duplicated content at different memory space, we can save memory. This patch tries to do that. Implementation is almost simple and intuitive but I should note one thing about implementation detail. To check duplication, this patch uses checksum of the page and collision of this checksum could be possible. There would be many choices to handle this situation but this patch chooses to allow entry with duplicated checksum to be added to the hash, but, not to compare all entries with duplicated checksum when checking duplication. I guess that checksum collision is quite rare event and we don't need to pay any attention to such a case. Therefore, I decided the most simplest way to implement the feature. If there is a different opinion, I can accept and go that way. Following is the result of this patch. Test result #1 (Swap): Android Marshmallow, emulator, x86_64, Backporting to kernel v3.18 orig_data_size: 145297408 compr_data_size: 32408125 mem_used_total: 32276480 dup_data_size: 3188134 meta_data_size: 1444272 Last two metrics added to mm_stat are related to this work. First one, dup_data_size, is amount of saved memory by avoiding to store duplicated page. Later one, meta_data_size, is the amount of data structure to support deduplication. If dup > meta, we can judge that the patch improves memory usage. In Adnroid, we can save 5% of memory usage by this work. Test result #2 (Blockdev): build the kernel and store output to ext4 FS on zram <no-dedup> Elapsed time: 249 s mm_stat: 430845952 191014886 196898816 0 196898816 28320 0 0 0 <dedup> Elapsed time: 250 s mm_stat: 430505984 190971334 148365312 0 148365312 28404 0 47287038 3945792 There is no performance degradation and save 23% memory. Test result #3 (Blockdev): copy android build output dir(out/host) to ext4 FS on zram <no-dedup> Elapsed time: out/host: 88 s mm_stat: 8834420736 3658184579 3834208256 0 3834208256 32889 0 0 0 <dedup> Elapsed time: out/host: 100 s mm_stat: 8832929792 3657329322 2832015360 0 2832015360 32609 0 952568877 80880336 It shows performance degradation roughly 13% and save 24% memory. Maybe, it is due to overhead of calculating checksum and comparison. Test result #4 (Blockdev): copy android build output dir(out/target/common) to ext4 FS on zram <no-dedup> Elapsed time: out/host: 203 s mm_stat: 4041678848 2310355010 2346577920 0 2346582016 500 4 0 0 <dedup> Elapsed time: out/host: 201 s mm_stat: 4041666560 2310488276 1338150912 0 1338150912 476 0 989088794 24564336 Memory is saved by 42% and performance is the same. Even if there is overhead of calculating checksum and comparison, large hit ratio compensate it since hit leads to less compression attempt. I checked the detailed reason of savings on kernel build workload and there are some cases that deduplication happens. 1) *.cmd Build command is usually similar in one directory so content of these file are very similar. In my system, more than 789 lines in fs/ext4/.namei.o.cmd and fs/ext4/.inode.o.cmd are the same in 944 and 938 lines of the file, respectively. 2) intermediate object files built-in.o and temporary object file have the similar contents. More than 50% of fs/ext4/ext4.o is the same with fs/ext4/built-in.o. 3) vmlinux .tmp_vmlinux1 and .tmp_vmlinux2 and arch/x86/boo/compressed/vmlinux.bin have the similar contents. Android test has similar case that some of object files(.class and .so) are similar with another ones. (./host/linux-x86/lib/libartd.so and ./host/linux-x86-lib/libartd-comiler.so) Anyway, benefit seems to be largely dependent on the workload so following patch will make this feature optional. However, this feature can help some usecases so is deserved to be merged. [1]: MemScope: Analyzing Memory Duplication on Android Systems, dl.acm.org/citation.cfm?id=2797023 [2]: zswap: Optimize compressed pool memory utilization, lkml.kernel.org/r/1341407574.7551.1471584870761.JavaMail.weblogic@epwas3p2 Change-Id: I8fe80c956c33f88a6af337d50d9e210e5c35ce37 Reviewed-by: Sergey Senozhatsky <[email protected]> Acked-by: Minchan Kim <[email protected]> Signed-off-by: Joonsoo Kim <[email protected]> Link: https://lore.kernel.org/patchwork/patch/787162/ Patch-mainline: linux-kernel@ Thu, 11 May 2017 22:30:26 Signed-off-by: Charan Teja Reddy <[email protected]> Signed-off-by: Park Ju Hyung <[email protected]> Signed-off-by: Alexander Winkowski <[email protected]>

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

AUR or Prebuilt repo please? #1

AUR or Prebuilt repo please? #1

shadichy commented Dec 7, 2021

AUR or Prebuilt repo please? #1

AUR or Prebuilt repo please? #1

Comments

shadichy commented Dec 7, 2021