CPL for JLCPCB MailBox_Guard_Boom

[Vad1mka2022]

Hello.
Maybe someone has already ordered the boards and can share the file CPL ? Sample:

<style> </style>

Designator	Mid X	Mid Y	Layer	Rotation
C1	95.0518mm	22.6822mm	Top	270

[PricelessToolkit]

Hi, I intentionally did not upload this specific file. I would like to clarify that the project files provided are specifically intended for the purpose of ordering Printed Circuit Boards (PCBs) and for manual assembly. They are not meant to facilitate assembly services in China. If you are in search of assembled and tested boards, I wish to remind you that these are available for direct purchase from my shop. Could you please inform me about the total cost of assembly and delivery that you have decided to proceed with, using your selected provider?

[Vad1mka2022]

Hello. I can't find out how much it would cost to build a board without this file. 5 pcs of boards without components is $4.5 including delivery. I can solder everything myself, but in my region there weren’t two components and I thought of ordering ready-made ones if it’s not expensive, but if the price is high enough I’ll look for something to replace the components with. I understand that this is an original project and am grateful for it, but I’m not sure whether it can work in my case, 5 floors of concrete walls with reinforcement, and I’m not ready to spend a lot of money to try and find out that it doesn’t work. If you do not distribute copyright files, I understand your decision. Thanks again for the project. śr., 21 lut 2024, 16:38 użytkownik PricelessToolkit < ***@***.***> napisał:

…

Hi, I intentionally did not upload this specific file. I would like to clarify that the project files provided are specifically intended for the purpose of ordering Printed Circuit Boards (PCBs) and for manual assembly. They are not meant to facilitate assembly services in China. If you are in search of assembled and tested boards, I wish to remind you that these are available for direct purchase from my shop. Could you please inform me about the total cost of assembly and delivery that you have decided to proceed with, using your selected provider? — Reply to this email directly, view it on GitHub <#45 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A4CPVIN2CMOHABZJV3HI4DDYUYIFXAVCNFSM6AAAAABDTDCCO2VHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DKNBVGMZTC> . You are receiving this because you authored the thread.Message ID: ***@***.*** .com>

[PricelessToolkit]

Components you can buy from lcsc.com and you will get a shipping discount if you have a PCB order on JLCPCB.

PS: Only the Lora 868 module price is 8 euros.

[PricelessToolkit]

The decision not to share CPL file is not meant to hinder community members from placing assembly orders. Instead, it aims to prevent the project from appearing on platforms such as AliExpress without authorization.

[Vad1mka2022]

Thanks for the tip. I didn't know you could order components when ordering the board. I managed to buy the Laura module for $4, the rest of the components combined cost less than $1. prices depend greatly on the region, as do salaries. Total total budget for one board: 1$ PCB, 4$ Lora, 1$ components = 6$. śr., 21 lut 2024, 16:51 użytkownik PricelessToolkit < ***@***.***> napisał:

…

Components you can buy from lcsc.com and you will get a delivery discount if you have a PCB order on JLCPCB. PS: Only the Lora 868 module price is 8 euros. — Reply to this email directly, view it on GitHub <#45 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A4CPVIJJKKE6ZWY4PRBIO5TYUYJZRAVCNFSM6AAAAABDTDCCO2VHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DKNBVGU2TS> . You are receiving this because you authored the thread.Message ID: ***@***.*** .com>