Register

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/2082

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if Julia TagBot is installed, or can be done manually through the github interface, or via:

git tag -a v0.5.2 -m "<description of version>" ca027143018e7610b09bcad37ea73dd0da41154c
git push origin v0.5.2

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Error while trying to register: Version 0.5.2 already exists

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/2156

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if Julia TagBot is installed, or can be done manually through the github interface, or via:

git tag -a v0.6.0 -m "<description of version>" 4524eede2cbb78e4c45970136b04231cea5267e9
git push origin v0.6.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/5556

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if Julia TagBot is installed, or can be done manually through the github interface, or via:

git tag -a v0.8.0 -m "<description of version>" 967ae0e74bbf772c78f81859c2f205066d08f184
git push origin v0.8.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/6059

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if Julia TagBot is installed, or can be done manually through the github interface, or via:

git tag -a v0.8.1 -m "<description of version>" 92918b0b70831a4d4a159a37f6e801501cb1ca08
git push origin v0.8.1

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/6499

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if Julia TagBot is installed, or can be done manually through the github interface, or via:

git tag -a v0.9.0 -m "<description of version>" 611642af341551da2b48cc8477b69f598043ebaf
git push origin v0.9.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/6719

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if Julia TagBot is installed, or can be done manually through the github interface, or via:

git tag -a v0.10.0 -m "<description of version>" 79a19c0b94fabf35c5e4833bbd679227ea5abb3c
git push origin v0.10.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/7243

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if Julia TagBot is installed, or can be done manually through the github interface, or via:

git tag -a v0.10.1 -m "<description of version>" d99ea9519d7d7fad6f4694107fcf209d6bbf8d1d
git push origin v0.10.1

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/7302

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if Julia TagBot is installed, or can be done manually through the github interface, or via:

git tag -a v0.10.2 -m "<description of version>" 0382fb4f8f31564638da565453ad0e7cbf6fd2b0
git push origin v0.10.2

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/8194

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if Julia TagBot is installed, or can be done manually through the github interface, or via:

git tag -a v1.1.0 -m "<description of version>" 22e20adddd88a1a936bc465597e203b0b5246370
git push origin v1.1.0

[ChrisRackauckas]

@JuliaRegistrator register()

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/93384

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v2.5.1 -m "<description of version>" 1bf03bd7aed6f09c9a4a25ca29c14277d7bf71c6
git push origin v2.5.1

Also, note the warning: Version 2.5.1 skips over 2.5.0
This can be safely ignored. However, if you want to fix this you can do so. Call register() again after making the fix. This will update the Pull request.

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/95780

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v3.0.0 -m "<description of version>" 1c5c8960d334a7fdde3963877b7b77d9537d0f6a
git push origin v3.0.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/96858

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v3.1.0 -m "<description of version>" 0c91a2994260d8fa9d42c3945edc2e9fe05a4a53
git push origin v3.1.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/97082

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v3.2.0 -m "<description of version>" 48bffa4fbffa3dac3b0abc0fc9b15b6023ece098
git push origin v3.2.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/97708

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v3.3.0 -m "<description of version>" 8b2bc5b7b38c38fabf516d18fb1e3cd475dd59ae
git push origin v3.3.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/100633

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v3.3.1 -m "<description of version>" e277f850996e58df1fc0894e39303a1cb7367f0c
git push origin v3.3.1

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/103912

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v3.4.0 -m "<description of version>" aae54650f290b95c091e7d14a4087119b92e3d06
git push origin v3.4.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/107151

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v3.5.0 -m "<description of version>" 92dfae57cfbe9368b9c911594ca9060e9f438786
git push origin v3.5.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/109878

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v3.5.1 -m "<description of version>" 9a1513d91907bcb2c1e050f682e6c9b5573db1b5
git push origin v3.5.1

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/118723

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v4.1.0 -m "<description of version>" 88df9151540845f57842274a70b11e02d65cbffb
git push origin v4.1.0