README.md

NetBox

NetBox is an IP address management (IPAM) and data center infrastructure management (DCIM) tool.

TL;DR

$ helm repo add bootc https://charts.boo.tc
$ helm install netbox \
  --set postgresql.postgresqlPostgresPassword=[password1] \
  --set postgresql.postgresqlPassword=[password2] \
  --set redis.auth.password=[password3] \
  bootc/netbox

Prerequisites

• This chart has only been tested on Kubernetes 1.18+, but should work on 1.14+
• This chart works with NetBox 3.0.0+ (3.0.11+ recommended)
• Recent versions of Helm 3 are supported

Installing the Chart

To install the chart with the release name my-release and default configuration:

$ helm repo add bootc https://charts.boo.tc
$ helm install my-release \
  --set postgresql.postgresqlPostgresPassword=[password1] \
  --set postgresql.postgresqlPassword=[password2] \
  --set redis.auth.password=[password3] \
  bootc/netbox

The default configuration includes the required PostgreSQL and Redis database services, but either or both may be managed externally if required.

Uninstalling the Chart

To delete the chart:

$ helm delete my-release

Upgrading

Bundled PostgreSQL

When upgrading or changing settings and using the bundled Bitnami PostgreSQL sub-chart, you must provide the postgresql.postgresqlPassword at minimum. Ideally you should also upply the postgresql.postgresqlPostgresPassword and, if using replication, the postgresql.replication.password. Please see the upstream documentation for further information.

From 3.x to 4.x

• NetBox 3.0.0 or above is required
• The Bitnami Redis sub-chart was upgraded from 12.x to 15.x; please read the upstream upgrade notes if you are using the bundled Redis
• The cacheTimeout and releaseCheck.timeout settings were removed

From 2.x to 3.x

• NetBox 2.10.4 or above is required
• Kubernetes 1.14 or above is required
• Helm v3 or above is now required
• The netbox Deployment selectors are changed, so the Deployment must be deleted on upgrades
• The Bitnami PostgreSQL sub-chart was upgraded from 8.x to 10.x; please read the upstream upgrade notes if you are using the bundled PostgreSQL
• The Bitnami Redis sub-chart was upgraded from 10.x to 12.x; please read the upstream upgrade notes if you are using the bundled Redis
• The NGINX container is removed, on account of upstream's migration from Gunicorn to NGINX Unit
• The webhooksRedis configuration key in values.yaml has been renamed to tasksRedis to match the upstream name
• The redis_password key in the Secret has been renamed to redis_tasks_password

From 1.x to 2.x

If you use an external Redis you will need to update your configuration values due to the chart reflecting upstream changes in how it uses Redis. There are now separate Redis configuration blocks for webhooks and for caching, though they can both point at the same Redis instance as long as the database numbers are different.

From 0.x to 1.x

The chart dependencies on PostgreSQL and Redis have been upgraded, so you may need to take action depending on how you have configured the chart. The PostgreSQL chart was upgraded from 5.x.x to 7.x.x, and Redis from 8.x.x to 9.x.x.

Configuration

The following table lists the configurable parameters for this chart and their default values.

Parameter	Description	Default
replicaCount	The desired number of NetBox pods	1
image.repository	NetBox container image repository	netboxcommunity/netbox
image.tag	NetBox container image tag	""
image.pullPolicy	NetBox container image pull policy	IfNotPresent
superuser.name	Initial super-user account to create	admin
superuser.email	Email address for the initial super-user account	[email protected]
superuser.password	Password for the initial super-user account	admin
superuser.apiToken	API token created for the initial super-user account	0123456789abcdef0123456789abcdef01234567
skipStartupScripts	Skip netbox-docker startup scripts	true
allowedHosts	List of valid FQDNs for this NetBox instance	["*"]
admins	List of admins to email about critical errors	[]
allowedUrlSchemes	URL schemes that are allowed within links in NetBox	see values.yaml
banner.top	Banner text to display at the top of every page	""
banner.bottom	Banner text to display at the bottom of every page	""
banner.login	Banner text to display on the login page	""
basePath	Base URL path if accessing NetBox within a directory	""
changelogRetention	Maximum number of days to retain logged changes (0 = forever)	90
cors.originAllowAll	CORS: allow all origins	false
cors.originWhitelist	CORS: list of origins authorised to make cross-site HTTP requests	[]
cors.originRegexWhitelist	CORS: list of regex strings matching authorised origins	[]
debug	Enable NetBox debugging (NOT for production use)	false
email.server	SMTP server to use to send emails	localhost
email.port	TCP port to connect to the SMTP server on	25
email.username	Optional username for SMTP authentication	""
email.password	Password for SMTP authentication (see also existingSecret)	""
email.useSSL	Use SSL when connecting to the server	false
email.useTLS	Use TLS when connecting to the server	false
email.timeout	Timeout for SMTP connections, in seconds	10
email.from	Sender address for emails sent by NetBox	""
enforceGlobalUnique	Enforce unique IP space in the global table (not in a VRF)	false
exemptViewPermissions	A list of models to exempt from the enforcement of view permissions	[]
graphQlEnabled	Enable the GraphQL API	true
httpProxies	HTTP proxies NetBox should use when sending outbound HTTP requests	null
internalIPs	IP addresses recognized as internal to the system	['127.0.0.1', '::1']
logging	Custom Django logging configuration	{}
loginPersistence	Enables users to remain authenticated to NetBox indefinitely	false
loginRequired	Permit only logged-in users to access NetBox	false (unauthenticated read-only access)
loginTimeout	How often to re-authenticate users	1209600 (14 days)
maintenanceMode	Display a "maintenance mode" banner on every page	false
mapsUrl	The URL to use when mapping physical addresses or GPS coordinates	https://maps.google.com/?q=
maxPageSize	Maximum number of objects that can be returned by a single API call	1000
storageBackend	Django-storages backend class name	null
storageConfig	Django-storages backend configuration	{}
metricsEnabled	Expose Prometheus metrics at the /metrics HTTP endpoint	false
napalm.username	Username used by the NAPALM library to access network devices	""
napalm.password	Password used by the NAPALM library (see also existingSecret)	""
napalm.timeout	Timeout for NAPALM to connect to a device (in seconds)	30
napalm.args	A dictionary of optional arguments to pass to NAPALM	{}
paginateCount	The default number of objects to display per page in the web UI	50
plugins	Additional plugins to load into NetBox	[]
pluginsConfig	Configuration for the additional plugins	{}
preferIPv4	Prefer devices' IPv4 address when determining their primary address	false
rackElevationDefaultUnitHeight	Rack elevation default height in pixels	22
rackElevationDefaultUnitWidth	Rack elevation default width in pixels	220
remoteAuth.enabled	Enable remote authentication support	false
remoteAuth.backend	Remote authentication backend class	netbox.authentication.RemoteUserBackend
remoteAuth.header	The name of the HTTP header which conveys the username	HTTP_REMOTE_USER
remoteAuth.autoCreateUser	Enables the automatic creation of new users	true
remoteAuth.defaultGroups	A list of groups to assign to newly created users	[]
remoteAuth.defaultPermissions	A list of permissions to assign newly created users	{}
remoteAuth.groupSyncEnabled	Sync remote user groups from an HTTP header set by a reverse proxy	false
remoteAuth.groupHeader	The name of the HTTP header which conveys the groups to which the user belongs	HTTP_REMOTE_USER_GROUP
remoteAuth.superuserGroups	The list of groups that promote an remote User to Superuser on login	[]
remoteAuth.superusers	The list of users that get promoted to Superuser on login	[]
remoteAuth.staffGroups	The list of groups that promote an remote User to Staff on login	[]
remoteAuth.staffUsers	The list of users that get promoted to Staff on login	[]
remoteAuth.groupSeparator	The Seperator upon which remoteAuth.groupHeader gets split into individual groups	|
remoteAuth.ldap.serverUri	see django-auth-ldap	""
remoteAuth.ldap.startTls	if StarTLS should be used	see values.yaml
remoteAuth.ldap.ignoreCertErrors	if Certificate errors should be ignored	see values.yaml
remoteAuth.ldap.bindDn	Distinguished Name to bind with	""
remoteAuth.ldap.bindPassword	Password for bind DN	""
remoteAuth.ldap.userDnTemplate	see AUTH_LDAP_USER_DN_TEMPLATE	see values.yaml
remoteAuth.ldap.userSearchBaseDn	see base_dn of django_auth_ldap.config.LDAPSearch	see values.yaml
remoteAuth.ldap.userSearchAttr	User attribute name for user search	sAMAccountName
remoteAuth.ldap.groupSearchBaseDn	base DN for group search	see values.yaml
remoteAuth.ldap.groupSearchClass	django-auth-ldap for group search	group
remoteAuth.ldap.groupType	see AUTH_LDAP_GROUP_TYPE	GroupOfNamesType
remoteAuth.ldap.requireGroupDn	DN of a group that is required for login	null
remoteAuth.ldap.findGroupPerms	see AUTH_LDAP_FIND_GROUP_PERMS	true
remoteAuth.ldap.mirrorGroups	see AUTH_LDAP_MIRROR_GROUPS	null
remoteAuth.ldap.cacheTimeout	see AUTH_LDAP_MIRROR_GROUPS_EXCEPT	null
remoteAuth.ldap.isAdminDn	required DN to be able to login in Admin-Backend, "is_staff"-Attribute of AUTH_LDAP_USER_FLAGS_BY_GROUP	see values.yaml
remoteAuth.ldap.isSuperUserDn	required DN to receive SuperUser privileges, "is_superuser"-Attribute of AUTH_LDAP_USER_FLAGS_BY_GROUP	see values.yaml
remoteAuth.ldap.attrFirstName	first name attribute of users, "first_name"-Attribute of AUTH_LDAP_USER_ATTR_MAP	givenName
remoteAuth.ldap.attrLastName	last name attribute of users, "last_name"-Attribute of AUTH_LDAP_USER_ATTR_MAP	sn
remoteAuth.ldap.attrMail	mail attribute of users, "email_name"-Attribute of AUTH_LDAP_USER_ATTR_MAP	mail
releaseCheck.url	Release check URL (GitHub API URL; see values.yaml)	null (disabled by default)
rqDefaultTimeout	Maximum execution time for background tasks, in seconds	300 (5 minutes)
sessionCookieName	The name to use for the session cookie	"sessionid"
timeZone	The time zone NetBox will use when dealing with dates and times	UTC
dateFormat	Django date format for long-form date strings	"N j, Y"
shortDateFormat	Django date format for short-form date strings	"Y-m-d"
timeFormat	Django date format for long-form time strings	"g:i a"
shortTimeFormat	Django date format for short-form time strings	"H:i:s"
dateTimeFormat	Django date format for long-form date and time strings	"N j, Y g:i a"
shortDateTimeFormat	Django date format for short-form date and time strongs	"Y-m-d H:i"
secretKey	Django secret key used for sessions and password reset tokens	"" (generated)
existingSecret	Use an existing Kubernetes Secret for secret values (see below)	"" (use individual chart values)
extraConfig	Additional NetBox configuration (see values.yaml)	[]
postgresql.enabled	Deploy PostgreSQL using bundled Bitnami PostgreSQL chart	true
postgresql.postgresqlUsername	Username to create for NetBox in bundled PostgreSQL instance	netbox
postgresql.postgresqlDatabase	Database to create for NetBox in bundled PostgreSQL instance	netbox
postgresql.*	Values under this key are passed to the bundled PostgreSQL chart	n/a
externalDatabase.host	PostgreSQL host to use when postgresql.enabled is false	localhost
externalDatabase.port	Port number for external PostgreSQL	5432
externalDatabase.database	Database name for external PostgreSQL	netbox
externalDatabase.username	Username for external PostgreSQL	netbox
externalDatabase.password	Password for external PostgreSQL (see also existingSecret)	""
externalDatabase.existingSecretName	Fetch password for external PostgreSQL from a different Secret	""
externalDatabase.existingSecretKey	Key to fetch the password in the above Secret	postgresql-password
externalDatabase.sslMode	PostgreSQL client SSL Mode setting	prefer
externalDatabase.connMaxAge	The lifetime of a database connection, as an integer of seconds	300
redis.enabled	Deploy Redis using bundled Bitnami Redis chart	true
redis.*	Values under this key are passed to the bundled Redis chart	n/a
tasksRedis.database	Redis database number used for NetBox task queue	0
tasksRedis.ssl	Enable SSL when connecting to Redis	false
tasksRedis.insecureSkipTlsVerify	Skip TLS certificate verification when connecting to Redis	false
tasksRedis.host	Redis host to use when redis.enabled is false	"netbox-redis"
tasksRedis.port	Port number for external Redis	6379
tasksRedis.sentinels	List of sentinels in host:port form (host and port not used)	[]
tasksRedis.sentinelService	Sentinel master service name	"netbox-redis"
tasksRedis.sentinelTimeout	Sentinel connection timeout, in seconds	300 (5 minutes)
tasksRedis.password	Password for external Redis (see also existingSecret)	""
tasksRedis.existingSecretName	Fetch password for external Redis from a different Secret	""
tasksRedis.existingSecretKey	Key to fetch the password in the above Secret	redis-password
cachingRedis.database	Redis database number used for caching views	1
cachingRedis.ssl	Enable SSL when connecting to Redis	false
cachingRedis.insecureSkipTlsVerify	Skip TLS certificate verification when connecting to Redis	false
cachingRedis.host	Redis host to use when redis.enabled is false	"netbox-redis"
cachingRedis.port	Port number for external Redis	6379
cachingRedis.sentinels	List of sentinels in host:port form (host and port not used)	[]
cachingRedis.sentinelService	Sentinel master service name	"netbox-redis"
cachingRedis.sentinelTimeout	Sentinel connection timeout, in seconds	300 (5 minutes)
cachingRedis.password	Password for external Redis (see also existingSecret)	""
cachingRedis.existingSecretName	Fetch password for external Redis from a different Secret	""
cachingRedis.existingSecretKey	Key to fetch the password in the above Secret	redis-password
imagePullSecrets	List of Secret names containing private registry credentials	[]
nameOverride	Override the application name (netbox) used throughout the chart	""
fullnameOverride	Override the full name of resources created as part of the release	""
serviceAccount.create	Create a ServiceAccount for NetBox	true
serviceAccount.annotations	Annotations to add to the service account	{}
serviceAccount.name	The name of the service account to use	"" (use the fullname)
persistence.enabled	Enable storage persistence for uploaded media (images)	true
persistence.existingClaim	Use an existing PersistentVolumeClaim instead of creating one	""
persistence.subPath	Mount a sub-path of the volume into the container, not the root	""
persistence.storageClass	Set the storage class of the PVC (use - to disable provisioning)	""
persistence.selector	Set the selector for PVs, if desired	{}
persistence.accessMode	Access mode for the volume	ReadWriteOnce
persistence.size	Size of persistent volume to request	1Gi
reportsPersistence.enabled	Enable storage persistence for NetBox reports	false
reportsPersistence.existingClaim	Use an existing PersistentVolumeClaim instead of creating one	""
reportsPersistence.subPath	Mount a sub-path of the volume into the container, not the root	""
reportsPersistence.storageClass	Set the storage class of the PVC (use - to disable provisioning)	""
reportsPersistence.selector	Set the selector for PVs, if desired	{}
reportsPersistence.accessMode	Access mode for the volume	ReadWriteOnce
reportsPersistence.size	Size of persistent volume to request	1Gi
podAnnotations	Additional annotations for NetBox pods	{}
podLabels	Additional labels for NetBox pods	{}
podSecurityContext	Security context for NetBox pods	see values.yaml
securityContext	Security context for NetBox containers	see values.yaml
service.type	Type of Service resource to create	ClusterIP
service.port	Port number for the service	80
service.loadBalancerSourceRanges	A list of allowed IP ranges when service.type is LoadBalancer	[]
ingress.enabled	Create an Ingress resource for accessing NetBox	false
ingress.className	Use a named IngressClass	""
ingress.annotations	Extra annotations to apply to the Ingress resource	{}
ingress.hosts	List of hosts and paths to map to the service (see values.yaml)	[{host:"chart-example.local",paths:["/"]}]
ingress.tls	TLS settings for the Ingress resource	[]
resources	Configure resource requests or limits for NetBox	{}
init.image.repository	Init container image repository	busybox
init.image.tag	Init container image tag	1.32.1
init.image.pullPolicy	Init container image pull policy	IfNotPresent
init.resources	Configure resource requests or limits for init container	{}
init.securityContext	Security context for init container	see values.yaml
autoscaling.enabled	Whether to enable the HorizontalPodAutoscaler	false
autoscaling.minReplicas	Minimum number of replicas when autoscaling is enabled	1
autoscaling.maxReplicas	Maximum number of replicas when autoscaling is enabled	100
autoscaling.targetCPUUtilizationPercentage	Target CPU utilisation percentage for autoscaling	80
autoscaling.targetMemoryUtilizationPercentage	Target memory utilisation percentage for autoscaling	null
nodeSelector	Node labels for pod assignment	{}
tolerations	Toleration labels for pod assignment	[]
updateStrategy	Configure deployment update strategy	{} (defaults to RollingUpdate)
affinity	Affinity settings for pod assignment	{}
extraEnvs	Additional environment variables to set in the NetBox container	[]
extraVolumeMounts	Additional volumes to mount in the NetBox container	[]
extraVolumes	Additional volumes to reference in pods	[]
extraContainers	Additional sidecar containers to be added to pods	[]
extraInitContainers	Additional init containers to run before starting main containers	[]
worker	Worker specific variables. Most global variables also apply here.	see values.yaml
housekeeping.enabled	Whether the Housekeeping CronJob should be active	true
housekeeping.concurrencyPolicy	ConcurrencyPolicy for the Housekeeping CronJob.	Forbid
housekeeping.failedJobsHistoryLimit	Number of failed jobs to keep in history	5
housekeeping.restartPolicy	Restart Policy for the Housekeeping CronJob.	OnFailure
housekeeping.schedule	Schedule for the CronJob in Cron syntax.	0 0 * * * (Midnight daily)
housekeeping.successfulJobsHistoryLimit	Number of successful jobs to keep in history	5
housekeeping.suspend	Whether to suspend the CronJob	false
housekeeping.podAnnotations	Additional annotations for housekeeping CronJob pods	{}
housekeeping.podLabels	Additional labels for housekeeping CronJob pods	{}
housekeeping.podSecurityContext	Security context for housekeeping CronJob pods	see values.yaml
housekeeping.securityContext	Security context for housekeeping CronJob containers	see values.yaml
housekeeping.resources	Configure resource requests or limits for housekeeping CronJob	{}
housekeeping.nodeSelector	Node labels for housekeeping CronJob pod assignment	{}
housekeeping.tolerations	Toleration labels for housekeeping CronJob pod assignment	[]
housekeeping.affinity	Affinity settings for housekeeping CronJob pod assignment	{}
housekeeping.extraEnvs	Additional environment variables to set in housekeeping CronJob	[]
housekeeping.extraVolumeMounts	Additional volumes to mount in the housekeeping CronJob	[]
housekeeping.extraVolumes	Additional volumes to reference in housekeeping CronJob pods	[]
housekeeping.extraContainers	Additional sidecar containers to be added to housekeeping CronJob	[]
housekeeping.extraInitContainers	Additional init containers for housekeeping CronJob pods	[]

Specify each parameter using the --set key=value[,key=value] argument to helm install or provide a YAML file containing the values for the above parameters:

$ helm install --name my-release bootc/netbox --values values.yaml

Using an Existing Secret

Rather than specifying passwords and secrets as part of the Helm release values, you may pass these to NetBox using a pre-existing Secret resource. When using this, the Secret must contain the following keys:

Key	Description	Required?
db_password	The password for the external PostgreSQL database	If postgresql.enabled is false and externalDatabase.existingSecretName is unset
email_password	SMTP user password	Yes, but the value may be left blank if not required
napalm_password	NAPALM user password	Yes, but the value may be left blank if not required
redis_tasks_password	Password for the external Redis tasks database	If redis.enabled is false and tasksRedis.existingSecretName is unset
redis_cache_password	Password for the external Redis cache database	If redis.enabled is false and cachingRedis.existingSecretName is unset
secret_key	Django session and password reset token encryption key	Yes, and should be 50+ random characters

Using LDAP Authentication

In order to enable LDAP authentication, please carry out the following steps:

1. Set image.tag in your values to an image with LDAP support (e.g. v3.0.11-ldap)
2. Configure the remoteAuth settings to enable the LDAP backend (see below)
3. Make sure you set all of the remoteAuth.ldap settings shown in the values.yaml file

For example:

remoteAuth:
  enabled: true
  backend: netbox.authentication.LDAPBackend
  ldap:
    serverUri: 'ldap://domain.com'
    startTls: true
    ignoreCertErrors: true
    bindDn: ''
    bindPassword: ''
    # and ALL the other remoteAuth.ldap.* settings from values.yaml

Note: in order to use anonymous LDAP binding set bindDn and bindPassword to an empty string as in the example above.

License

The following notice applies to all files contained within this Helm Chart and the Git repository which contains it:

Copyright 2019-2020 Chris Boot

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.