install.sh

PIROGUE_ROOT_DIR=/usr/share/PiRogue
mkdir -p $PIROGUE_ROOT_DIR

# Install foundation
apt dist-upgrade
apt install -y kali-linux-full
apt install -y bash-completion vim git dexdump adb htop thunar-archive-plugin ntp
apt install -y linux-headers-$(uname -r) build-essential python-dev ristretto
apt install -y python-pip python-imaging python-smbus i2c-tools mana-toolkit
pip install RPi.GPIO 

# Change hostname
echo PiRogue > /etc/hostname

# Fix locale issue
echo 'export LC_ALL="en_US.UTF-8"' >> ~/.bashrc

# Install the realtek driver
apt install -y firmware-realtek
#  after the next reboot, wlan1 will be available

# Configure wlan1 as rogue AP
cat >/etc/network/interfaces <<EOL
auto lo
iface lo inet loopback

auto wlan1
allow-hotplug wlan1
iface wlan1 inet static
    address 10.0.0.1
    netmask 255.0.0.0
EOL

# Install hostapd
cd /tmp
wget http://ftp.fr.debian.org/debian/pool/main/w/wpa/hostapd_2.4-1+deb9u1_armhf.deb
dpkg -i hostapd_2.4-1+deb9u1_armhf.deb
apt-mark hold hostapd
systemctl unmask hostapd
systemctl enable hostapd
cd

# Configure hostapd
echo DAEMON_CONF=\"${PIROGUE_ROOT_DIR}/hostapd/hostapd.conf\" >> /etc/default/hostapd

# Instal dnsmasq
apt install -y dnsmasq
systemctl enable dnsmasq

# Configure dnsmasq
ln -s ${PIROGUE_ROOT_DIR}/dnsmasq/dnsmasq.conf /etc/dnsmasq.d/pirogue.conf

# Configure network routing
echo net.ipv4.ip_forward=1 >> /etc/sysctl.conf
echo net.ipv6.conf.all.forwarding=1 >> /etc/sysctl.conf

# Configure the firewall
ln -s /usr/share/PiRogue/firewall/90pirogue.sh /etc/NetworkManager/dispatcher.d/90pirogue.sh
chmod +x /usr/share/PiRogue/firewall/90pirogue.sh

# Configure I2C
cat >/boot/config.txt <<EOL
dtparam=i2c1=on
dtparam=i2c_arm=on
EOL
cat >/etc/modules <<EOL
i2c-bcm2708 
i2c-dev
EOL

# Install OLED library
cd /tmp
git clone https://github.com/adafruit/Adafruit_Python_SSD1306.git ssd1306
cd ssd1306
python setup.py install
cd
rm -rf /tmp/ssd1306

# Add a reboot task in cron table displaying the boot screen
echo @reboot /usr/bin/python ${PIROGUE_ROOT_DIR}/oled-screen/boot.py /etc/cron.d/pirogue

# Add a service displaying PiRogue details
ln -s ${PIROGUE_ROOT_DIR}/oled-screen/display_details.service /etc/systemd/system/display_details.service
systemctl enable display_details.service

# Final reboot
reboot