Docker tests and push #339

Workflow file for this run

	name: CI

	on:
	push:
	branches: [ master ]
	pull_request:
	branches: [ master ]

	env:
	ACTIONS_RUNNER_DEBUG: true
	ACTIONS_STEP_DEBUG: true
	NIPAPD_IMAGE: nipap/nipapd
	WWW_IMAGE: nipap/nipap-www

	jobs:
	test:

	runs-on: ubuntu-22.04
	strategy:
	matrix:
	install: [ pip, apt ]
	upgrade: [ true, false ]
	exclude:
	- install: pip
	upgrade: true
	fail-fast: false

	steps:
	- name: "Check out NIPAP repository"
	uses: actions/checkout@v2

	- name: "Install dependencies and prepare NIPAP"
	run: \|
	# Set up NIPAP repo
	echo "deb http://spritelink.github.io/NIPAP/repos/apt testing main extra" \| sudo tee /etc/apt/sources.list.d/nipap.list
	wget -O - https://spritelink.github.io/NIPAP/nipap.gpg.key \| sudo apt-key add -
	sudo apt update -qq

	# Install dependencies for build and test
	sudo apt install -y \
	devscripts \
	fakeroot \
	debhelper \
	dh-python \
	junit4 \
	libldap-dev \
	libsasl2-dev \
	python3-docutils \
	python3-nose \
	python3-requests \
	python3-setuptools \
	python3-wheel \
	python3-all \
	default-jdk \
	gradle \
	rename \
	postgresql-14-ip4r

	sudo service postgresql start
	pg_isready

	sed -e 's/username = guest/username = unittest/' -e 's/password = guest/password = gottatest/' nipap-cli/nipaprc > ~/.nipaprc
	chmod 0600 ~/.nipaprc

	# Set up CA and generate SSL cert
	mkdir /tmp/ca
	openssl genrsa -out /tmp/ca/ca.key 2048
	openssl req -new -x509 -key /tmp/ca/ca.key -out /tmp/ca/ca.crt -subj '/C=SE/O=NIPAP Test CA'
	sudo cp /tmp/ca/ca.crt /usr/local/share/ca-certificates/
	sudo update-ca-certificates
	openssl genrsa -out /tmp/ca/test.key 2048
	openssl req -new -key /tmp/ca/test.key -out /tmp/ca/test.csr -subj "/CN=127.0.0.1"
	openssl x509 -req -in /tmp/ca/test.csr -CA /tmp/ca/ca.crt -CAkey /tmp/ca/ca.key -CAcreateserial -out /tmp/ca/test.crt
	cat /tmp/ca/test.crt /tmp/ca/test.crt > /tmp/ca/test.bundle.crt
	sudo chmod -R a+r /tmp/ca

	- name: "Install using pip"
	if: ${{ matrix.install == 'pip' }}
	run: \|
	# install nipap dependencies
	sudo -H pip3 install -r nipap/requirements.txt
	# SQL
	sudo su -c "cd nipap/sql; PGPASSWORD=papin make install" postgres
	# move configuration file into place
	sudo mkdir /etc/nipap
	sudo cp nipap/nipap.conf.dist /etc/nipap/nipap.conf
	sudo sed -e "s/{{LISTEN_ADDRESS}}/127.0.0.1/" -e "s/{{LISTEN_PORT}}/1337/" -e "s/#ssl_port.\+$/ssl_port = 1338/" -e "s/#ssl_cert_file.\+$/ssl_cert_file = \/tmp\/ca\/test.bundle.crt/" -e "s/#ssl_key_file.\+$/ssl_key_file = \/tmp\/ca\/test.key/" -e "s/{{DB_USERNAME}}/nipap/" -e "s/{{DB_NAME}}/nipap/" -e "s/{{DB_PASSWORD}}/papin/" -e "s/{{DB_SSLMODE}}/require/" -e "s/{{DB_PORT}}/5432/" -e "s/{{DB_HOST}}/localhost/" -e "s/{{SYSLOG}}/true/" -i /etc/nipap/nipap.conf
	# create local user for unittest
	sudo nipap/nipap-passwd create-database
	sudo nipap/nipap-passwd add -u unittest -p gottatest -n unittest
	sudo nipap/nipap-passwd add -u readonly -p gottatest --readonly -n "Read-only user for running unit tests"
	# install pynipap
	cd pynipap; sudo python3 setup.py install; cd ..
	# install nipap-cli dependencies
	sudo -H pip3 install -r nipap-cli/requirements.txt
	# start nipap backend
	nipap/nipapd --no-pid-file -c /etc/nipap/nipap.conf -df 2>&1 > /tmp/nipap.log &

	- name: "Install latest release from apt"
	if: ${{ matrix.install == 'apt' && matrix.upgrade == true }}
	run: \|
	# Install NIPAP packages from official repo
	sudo apt install -qq nipapd nipap-www nipap-cli
	# populate answers to nipapd package install questions and reconfigure
	echo 'set nipapd/database_host localhost' \| sudo debconf-communicate
	echo 'set nipapd/local_db_autoconf true' \| sudo debconf-communicate
	echo 'set nipapd/startup true' \| sudo debconf-communicate
	echo 'set nipapd/local_db_upgrade true' \| sudo debconf-communicate
	sudo dpkg-reconfigure nipapd
	# Enable SSL
	sudo sed -e "s/#ssl_port.\+$/ssl_port = 1338/" -e "s/#ssl_cert_file.\+$/ssl_cert_file = \/tmp\/ca\/test.bundle.crt/" -e "s/#ssl_key_file.\+$/ssl_key_file = \/tmp\/ca\/test.key/" -i /etc/nipap/nipap.conf
	# create local user for unittest and restart
	sudo nipap-passwd add -u unittest -p gottatest -f /etc/nipap/local_auth.db -n unittest
	sudo systemctl restart nipapd.service
	# add some data to the database that we can verify later
	nosetests3 tests/upgrade-before.py
	# bump version so that we know we are upgrading beyond what is installed
	(echo -e 'Version 9999.9.9\n------------------\n * Test version for automatic upgrade test'; cat NEWS) > NEWS2
	mv NEWS2 NEWS
	make bumpversion

	- name: "Build and install Debian packages"
	if: ${{ matrix.install == 'apt' }}
	run: \|
	# build new NIPAP packages
	make builddeb
	# install the newly built nipap packages
	sudo apt install -o Dpkg::Options::="--force-confnew" ./nipap.deb ./python-pynipap*.deb
	# populate answers to nipapd package install questions and reconfigure
	echo 'set nipapd/database_host localhost' \| sudo debconf-communicate
	echo 'set nipapd/local_db_autoconf true' \| sudo debconf-communicate
	echo 'set nipapd/startup true' \| sudo debconf-communicate
	echo 'set nipapd/local_db_upgrade true' \| sudo debconf-communicate
	sudo dpkg-reconfigure nipapd
	# Enable SSL
	if [ `grep -c ssl_port /etc/nipap/nipap.conf` -eq 0 ]; then \
	# No SSL config in file - add from scratch
	sudo sed '/^port =./a ssl_port = 1338\nssl_cert_file = \/tmp\/ca\/test.bundle.crt\nssl_key_file = \/tmp\/ca\/test.key' -i /etc/nipap/nipap.conf; \
	else \
	sudo sed -e "s/#ssl_port.\+$/ssl_port = 1338/" -e "s/#ssl_cert_file.\+$/ssl_cert_file = \/tmp\/ca\/test.bundle.crt/" -e "s/#ssl_key_file.\+$/ssl_key_file = \/tmp\/ca\/test.key/" -i /etc/nipap/nipap.conf; \
	fi
	# create local user for unittests
	sudo nipap/nipap-passwd add -u unittest -p gottatest -f /etc/nipap/local_auth.db -n "User for running unit tests"
	sudo nipap/nipap-passwd add -u readonly -p gottatest -f /etc/nipap/local_auth.db --readonly -n "Read-only user for running unit tests"
	sudo sed -e "s/^db_host =./db_host = localhost/" -e "s/{{SYSLOG}}/true/" -e "s/^debug.\+/debug = true/" -e "s/^user/#user/" -i /etc/nipap/nipap.conf
	sudo systemctl restart nipapd.service

	- name: "Verify pre-upgrade data"
	if: ${{ matrix.upgrade == true }}
	run: nosetests3 tests/upgrade-after.py

	- name: "Run test suite"
	env:
	REQUESTS_CA_BUNDLE: /etc/ssl/certs/ca-certificates.crt
	run: \|
	nosetests3 tests/test_xmlrpc.py
	nosetests3 tests/nipaptest.py
	nosetests3 tests/test_cli.py
	nosetests3 tests/test_nipap_ro.py
	nosetests3 tests/test_rest.py
	make -C jnipap test

	- name: "Accident analysis"
	if: failure()
	run: \|
	sudo cat /etc/nipap/nipap.conf \|\| true
	sudo cat /var/log/syslog \|\| true
	sudo cat /var/log/postgresql/postgresql-*-main.log \|\| true
	sudo cat /tmp/nipap.log \|\| true

	docker:
	name: docker
	runs-on: ubuntu-22.04
	steps:

	- name: "Set up QEMU"
	uses: docker/setup-qemu-action@v3

	- name: "Set up Docker Buildx"
	uses: docker/setup-buildx-action@v3

	- name: "Check out NIPAP repository"
	uses: actions/checkout@v2

	- name: "Hadolint nipapd"
	uses: hadolint/[email protected]
	with:
	Dockerfile: Dockerfile.nipapd

	- name: "Hadolint WWW"
	uses: hadolint/[email protected]
	with:
	Dockerfile: Dockerfile.www

	- name: "nipapd metadata"
	id: nipapd_meta
	uses: docker/metadata-action@v5
	with:
	images: ${{ env.NIPAPD_IMAGE }}
	tags: \|
	type=sha,prefix=

	- name: "Build nipapd Docker image"
	uses: docker/build-push-action@v5
	with:
	context: .
	file: ./Dockerfile.nipapd
	load: true
	tags: \|
	${{ env.NIPAPD_IMAGE }}:ci
	${{ steps.nipapd_meta.outputs.tags }}
	push: false

	- name: "www metadata"
	id: www_meta
	uses: docker/metadata-action@v5
	with:
	images: ${{ env.WWW_IMAGE }}
	tags: \|
	type=sha,prefix=

	- name: "Build www Docker image"
	uses: docker/build-push-action@v5
	with:
	context: .
	file: ./Dockerfile.www
	load: true
	tags: \|
	${{ env.WWW_IMAGE }}:ci
	${{ steps.www_meta.outputs.tags }}
	push: false

	- name: "Setup Docker test"
	run: \|
	# Install dependencies
	sudo apt install -y \
	libldap-dev \
	libsasl2-dev \
	python3-wheel \
	python3-nose \
	python3-requests \
	postgresql-14-ip4r

	sudo -H pip3 install -r nipap/requirements.txt # needed to run test suite

	# Set up PostgreSQL
	sudo service postgresql start
	pg_isready
	sudo su -c "cd nipap/sql; PGPASSWORD=papin make install" postgres

	# Start nipapd container
	docker run --rm --network=host -d --name=nipapd_ci -e DB_HOST=127.0.0.1 -e DB_USERNAME=nipap -e DB_PASSWORD=papin ${{ env.NIPAPD_IMAGE }}:ci
	sleep 10
	docker logs nipapd_ci

	# Set up for test
	sudo mkdir -p /etc/nipap
	sudo docker cp nipapd_ci:/etc/nipap/nipap.conf /etc/nipap/
	sudo docker cp nipapd_ci:/etc/nipap/local_auth.db /etc/nipap/
	docker exec -t nipapd_ci nipap-passwd add -u unittest -p gottatest -n unittest
	docker exec -t nipapd_ci nipap-passwd add -u readonly -p gottatest --readonly -n "Read-only user for running unit tests"

	- name: "Run docker tests"
	run: \|
	# Run tests
	nosetests3 tests/test_xmlrpc.py
	nosetests3 tests/nipaptest.py
	nosetests3 tests/test_nipap_ro.py
	nosetests3 tests/test_rest.py

	- name: "Login to Docker Hub"
	if: ${{ github.ref_name == 'master' }}
	uses: docker/login-action@v3
	with:
	username: ${{ secrets.DOCKERHUB_USERNAME }}
	password: ${{ secrets.DOCKERHUB_TOKEN }}

	- name: "Build and push nipapd Docker image"
	if: ${{ github.ref_name == 'master' }}
	uses: docker/build-push-action@v5
	with:
	context: .
	file: ./Dockerfile.nipapd
	load: true
	tags: ${{ steps.nipapd_meta.outputs.tags }}
	push: true

	- name: "Build and push www Docker image"
	if: ${{ github.ref_name == 'master' }}
	uses: docker/build-push-action@v5
	with:
	context: .
	file: ./Dockerfile.www
	load: true
	tags: ${{ steps.www_meta.outputs.tags }}
	push: true

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Docker tests and push #339

Workflow file

Docker tests and push #339

Jobs

Run details

Workflow file for this run