3DP_EN.md

Killer Whale 3D Printed Parts（日本語）

Ballcase

There are models for printing and split models for sending.

How to assemble

Secure the bearing case with 10 mm M2 screws and nuts. Secure the case to the mainboard with 10 mm M3 screws and nuts. Install switch plate. Covering.

File contents

Bearing case

https://github.com/Taro-Hayashi/KillerWhale/tree/main/stl/Ballcase_34mm_Bearing

Filename
Integrated.stl
Separated #1.stl
Separated #2.stl
Cover.stl

Parts
M2 screws	10mm
M2 nuts
Bearings	2x6x2.5

Ceramic ball case

https://github.com/Taro-Hayashi/KillerWhale/tree/main/stl/Ballcase_34mm_Sphere

Filename
Integrated.stl
Separated #1.stl
Separated #2.stl
Cover.stl

Sphere Unit

https://github.com/Taro-Hayashi/KillerWhale/tree/main/stl/Sphere_Unit

Filename
2mm.stl
2.5mm.stl
3mm.stl
3.175mm.stl
3.5mm 0.2mm nozzle.stl
3.5mm 0.4mm nozzle.stl

D-Pad

https://github.com/Taro-Hayashi/KillerWhale/tree/main/stl/D-Pad

Filename
D-Pad.stl

Wheel

https://github.com/Taro-Hayashi/KillerWhale/tree/main/stl/Wheel

Filename
Wheel.stl
Shaft.stl

Joystick Cap

https://github.com/Taro-Hayashi/KillerWhale/tree/main/stl/Joystick

Filename
Joystick.stl

Killer Whale 3D Printed Parts by Taro Hayashi is licensed under CC BY 4.0