MicroView.h

/*
    MicroView Arduino Library
    Copyright (C) 2014 GeekAmmo

    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef MICROVIEW_H
#define MICROVIEW_H

#include <stdio.h>
#include <Arduino.h>
#include <avr/pgmspace.h>

#define swap(a, b) { uint8_t t = a; a = b; b = t; }

#define OLEDPWR	4	// 3.3V regulator enable

// Port and bit mappings for DC, RESET, SS
// ** These are CPU dependent **
#define DCPORT	PORTB
#define DCDDR	DDRB
#define DCBIT	0

#define RESETPORT	PORTD
#define RESETDDR	DDRD
#define RESETBIT	7

#define SSPORT	PORTB
#define SSDDR	DDRB
#define SSBIT	2

// Macros to quickly set DC, RESET, SS
// A HIGH sets the signal to input mode with the internal pullup enabled
#define DCHIGH ((DCPORT |= _BV(DCBIT)), (DCDDR &= ~_BV(DCBIT)))
#define DCLOW ((DCPORT &= ~_BV(DCBIT)), (DCDDR |= _BV(DCBIT)))

#define RESETHIGH ((RESETPORT |= _BV(RESETBIT)), (RESETDDR &= ~_BV(RESETBIT)))
#define RESETLOW ((RESETPORT &= ~_BV(RESETBIT)), (RESETDDR |= _BV(RESETBIT)))

#define SSHIGH ((SSPORT |= _BV(SSBIT)), (SSDDR &= ~_BV(SSBIT)))
#define SSLOW ((SSPORT &= ~_BV(SSBIT)), (SSDDR |= _BV(SSBIT)))

// SCK, MOSI already defined by original pins_arduino.h
//#define SCK	13
//#define MOSI	11

#define BLACK 0
#define WHITE 1

#define LCDWIDTH			64
#define LCDHEIGHT			48
#define LCDPAGES			(LCDHEIGHT / 8)
#define LCDCOLUMNOFFSET		32	// Visible start column within SSD1306 controller memory

#define LCDTOTALWIDTH		128	// Full width of SSD1306 controller memory
#define LCDTOTALHEIGHT		64	// Full height of SSD1306 controller memory
#define LCDTOTALPAGES		(LCDTOTALHEIGHT / 8)

#define FONTHEADERSIZE		6

#define NORM				0
#define XOR					1

#define PAGE				0
#define ALL					1

#define WIDGETSTYLE0			0
#define WIDGETSTYLE1			1
// Added for Vertical slider styles
#define WIDGETSTYLE2			2
#define WIDGETSTYLE3			3

// Flag to be added to widget style to indicate no numeric value display
#define WIDGETNOVALUE			0x80

#define SETCONTRAST 		0x81
#define DISPLAYALLONRESUME 	0xA4
#define DISPLAYALLON 		0xA5
#define NORMALDISPLAY 		0xA6
#define INVERTDISPLAY 		0xA7
#define DISPLAYOFF 			0xAE
#define DISPLAYON 			0xAF
#define SETDISPLAYOFFSET 	0xD3
#define SETCOMPINS 			0xDA
#define SETVCOMDESELECT		0xDB
#define SETDISPLAYCLOCKDIV 	0xD5
#define SETPRECHARGE 		0xD9
#define SETMULTIPLEX 		0xA8
#define SETLOWCOLUMN 		0x00
#define SETHIGHCOLUMN 		0x10
#define SETPAGE				0xB0
#define SETADDRESSMODE		0x20
#define SETCOLUMNBOUNDS		0x21
#define SETPAGEBOUNDS		0x22
#define SETSTARTLINE 		0x40
#define MEMORYMODE 			0x20
#define COMSCANINC 			0xC0
#define COMSCANDEC 			0xC8
#define SEGREMAP 			0xA0
#define CHARGEPUMP 			0x8D
#define EXTERNALVCC 		0x01
#define SWITCHCAPVCC 		0x02

// Scroll
#define ACTIVATESCROLL 					0x2F
#define DEACTIVATESCROLL 				0x2E
#define SETVERTICALSCROLLAREA 			0xA3
#define RIGHTHORIZONTALSCROLL 			0x26
#define LEFTHORIZONTALSCROLL 			0x27
#define VERTICALRIGHTHORIZONTALSCROLL	0x29
#define VERTICALLEFTHORIZONTALSCROLL	0x2A

typedef enum CMD {
	CMD_CLEAR,			//0
	CMD_INVERT,			//1
	CMD_CONTRAST,		//2
	CMD_DISPLAY,		//3
	CMD_SETCURSOR,		//4
	CMD_PIXEL,			//5
	CMD_LINE,			//6
	CMD_LINEH,			//7
	CMD_LINEV,			//8
	CMD_RECT,			//9
	CMD_RECTFILL,		//10
	CMD_CIRCLE,			//11
	CMD_CIRCLEFILL,		//12
	CMD_DRAWCHAR,		//13
	CMD_DRAWBITMAP,		//14
	CMD_GETLCDWIDTH,	//15
	CMD_GETLCDHEIGHT,	//16
	CMD_SETCOLOR,		//17
	CMD_SETDRAWMODE		//18
} commCommand_t;

class MicroView : public Print{
public:
	MicroView(void) {};
	void begin(void);
	void end(void);

//#if ARDUINO >= 100

	virtual size_t write(uint8_t);

//#else
//	virtual void   write(uint8_t);
//#endif

	// RAW LCD functions
	void command(uint8_t c);
	void command(uint8_t c1, uint8_t c2);
	void command(uint8_t c1, uint8_t c2, uint8_t c3);
	void data(uint8_t c);
	void setColumnAddress(uint8_t add);
	void setPageAddress(uint8_t add);
	
	// LCD Draw functions
	void clear(uint8_t mode);
	void clear(uint8_t mode, uint8_t c);
	void invert(boolean inv);
	void contrast(uint8_t contrast);
	void display(void);
	void setCursor(uint8_t x, uint8_t y);
	void pixel(uint8_t x, uint8_t y);
	void pixel(uint8_t x, uint8_t y, uint8_t color, uint8_t mode);
	void line(uint8_t x0, uint8_t y0, uint8_t x1, uint8_t y1);
	void line(uint8_t x0, uint8_t y0, uint8_t x1, uint8_t y1, uint8_t color, uint8_t mode);
	void lineH(uint8_t x, uint8_t y, uint8_t width);
	void lineH(uint8_t x, uint8_t y, uint8_t width, uint8_t color, uint8_t mode);
	void lineV(uint8_t x, uint8_t y, uint8_t height);
	void lineV(uint8_t x, uint8_t y, uint8_t height, uint8_t color, uint8_t mode);
	void rect(uint8_t x, uint8_t y, uint8_t width, uint8_t height);
	void rect(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color , uint8_t mode);
	void rectFill(uint8_t x, uint8_t y, uint8_t width, uint8_t height);
	void rectFill(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color , uint8_t mode);
	void circle(uint8_t x, uint8_t y, uint8_t radius);
	void circle(uint8_t x, uint8_t y, uint8_t radius, uint8_t color, uint8_t mode);
	void circleFill(uint8_t x0, uint8_t y0, uint8_t radius);
	void circleFill(uint8_t x0, uint8_t y0, uint8_t radius, uint8_t color, uint8_t mode);
	void drawChar(uint8_t x, uint8_t y, uint8_t c);
	void drawChar(uint8_t x, uint8_t y, uint8_t c, uint8_t color, uint8_t mode);
	void drawBitmap(void);
	uint8_t getLCDWidth(void);
	uint8_t getLCDHeight(void);
	void setColor(uint8_t color);
	void setDrawMode(uint8_t mode);
	uint8_t *getScreenBuffer(void);

	// Font functions
	uint8_t getFontWidth(void);
	uint8_t getFontHeight(void);
	uint8_t getTotalFonts(void);
	uint8_t getFontType(void);
	uint8_t setFontType(uint8_t type);
	uint8_t getFontStartChar(void);
	uint8_t getFontTotalChar(void);

	// LCD Rotate Scroll functions	
	void scrollRight(uint8_t start, uint8_t stop);
	void scrollLeft(uint8_t start, uint8_t stop);
	void scrollVertRight(uint8_t start, uint8_t stop);
	void scrollVertLeft(uint8_t start, uint8_t stop);
	void scrollStop(void);
	void flipVertical(boolean flip);
	void flipHorizontal(boolean flip);
	
	// Communication
	void checkComm(void);
	void doCmd(uint8_t index);
	
private:
	uint8_t foreColor,drawMode,fontWidth, fontHeight, fontType, fontStartChar, fontTotalChar, cursorX, cursorY;
	uint16_t fontMapWidth;
	//unsigned char *fontsPointer[TOTALFONTS];
	static const unsigned char *fontsPointer[];
	
	int readSerial(void);
};

class MicroViewWidget {
public:
	MicroViewWidget(uint8_t newx, uint8_t newy, int16_t min, int16_t max);
	uint8_t getX();
	uint8_t getY();
	void setX(uint8_t newx);
	void setY(uint8_t newy);
	int16_t getMinValue();
	int16_t getMaxValue();
	int16_t getValue();
	void setMinValue(int16_t min);
	void setMaxValue(int16_t max);
	void setValue(int16_t val);
	void setValue(int16_t val, boolean doDraw);
	uint8_t getValLen();
	uint8_t getMaxValLen();
	/** \brief Draw widget value overridden by child class. */
	virtual void draw(){};
	/** \brief Draw widget face overridden by child class. */
	virtual void drawFace(){};
	void reDraw();
	void drawNumValue(int16_t value);
	virtual ~MicroViewWidget(){};
protected:
	uint8_t posX;
	uint8_t posY;
	int16_t minValue;
	int16_t maxValue;
	int16_t value;
	uint8_t valLen;
	uint8_t maxValLen;
private:
	/** \brief Draw or erase the widget pointer. Overridden by child class. */
	virtual void drawPointer(){};
	void setMaxValLen();
};

class MicroViewSlider: public MicroViewWidget{
public:
	MicroViewSlider(uint8_t newx, uint8_t newy, int16_t min, int16_t max);
	MicroViewSlider(uint8_t newx, uint8_t newy, int16_t min, int16_t max, uint8_t sty);
	void draw();
	void drawFace();
private:
	void drawPointer();
	uint8_t style, totalTicks;
	boolean noValDraw;
	int16_t prevValue;
};

class MicroViewGauge: public MicroViewWidget{
public:
	MicroViewGauge(uint8_t newx, uint8_t newy, int16_t min, int16_t max);
	MicroViewGauge(uint8_t newx, uint8_t newy, int16_t min, int16_t max, uint8_t sty);
	void draw();
	void drawFace();
private:
	void drawPointer();
	uint8_t style, radius;
	boolean noValDraw;
	int16_t prevValue;
};

#define SPI_CLOCK_DIV4 0x00
#define SPI_CLOCK_DIV16 0x01
#define SPI_CLOCK_DIV64 0x02
#define SPI_CLOCK_DIV128 0x03
#define SPI_CLOCK_DIV2 0x04
#define SPI_CLOCK_DIV8 0x05
#define SPI_CLOCK_DIV32 0x06
//#define SPI_CLOCK_DIV64 0x07

#define SPI_MODE0 0x00
#define SPI_MODE1 0x04
#define SPI_MODE2 0x08
#define SPI_MODE3 0x0C

#define SPI_MODE_MASK 0x0C  // CPOL = bit 3, CPHA = bit 2 on SPCR
#define SPI_CLOCK_MASK 0x03  // SPR1 = bit 1, SPR0 = bit 0 on SPCR
#define SPI_2XCLOCK_MASK 0x01  // SPI2X = bit 0 on SPSR

class MVSPIClass {
public:
/** \brief Wait for SPI serial transfer complete. */
  inline static void wait();

/** \brief Transfer data byte via SPI port. */
  inline static void transfer(byte _data);

/** \brief Set up to begin a SPI packet transmit */
  static void packetBegin();

/** \brief End a SPI packet transmit */
  static void packetEnd();

  // SPI Configuration methods

  inline static void attachInterrupt();
  inline static void detachInterrupt(); // Default

  static void begin(); // Default
  static void end();

  static void setBitOrder(uint8_t);
  static void setDataMode(uint8_t);
  static void setClockDivider(uint8_t);
};

extern MVSPIClass MVSPI;

void MVSPIClass::wait() {
  while (!(SPSR & _BV(SPIF)))
    ;
}

void MVSPIClass::transfer(byte _data) {
  SPDR = _data;
}

void MVSPIClass::attachInterrupt() {
  SPCR |= _BV(SPIE);
}

void MVSPIClass::detachInterrupt() {
  SPCR &= ~_BV(SPIE);
}

extern MicroView uView;

/** \brief Get the number of print characters for a 16 bit signed value. */
uint8_t getInt16PrintLen(int16_t val);

#endif