post process all not working

[creepyflyer]

the error i get

0 files were written. 1 Setups were skipped due to error:
Failed on setup Setup1: Tool change G-code (Txx) not found; this post processor is not compatible with Post Process All.

the tool change code i have tryed to erase but still the same error

[TimPaterson]

Are you a new user, or did this used to work? What post processor are you using? Does it put out tool change G-code when you use the post with Fusion?

[creepyflyer]

hey tim yes new user and it has never worked grbl post processor last question i do not understand i just wanted to get the faster feed rate when the tool is not cutting as a private user fusion prohibits this hope you can help thanks in advance greetings kurt

…

------ Oorspronkelijke bericht ------ Van "Tim Paterson" ***@***.***> Aan "TimPaterson/Fusion360-Batch-Post" ***@***.***> CC "creepyflyer" ***@***.***>; "Author" ***@***.***> Datum 28/01/2025 19:07:46 Onderwerp Re: [TimPaterson/Fusion360-Batch-Post] post process all not working (Issue #77)

Are you a new user, or did this used to work? What post processor are you using? Does it put out tool change G-code when you use the post with Fusion? — Reply to this email directly, view it on GitHub <#77 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A3OGLVGFHQHEA3LNJGKLCOD2M7BPBAVCNFSM6AAAAABV63LPUKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMJZG4ZDCMRZGQ>. You are receiving this because you authored the thread.Message ID: ***@***.***>

[TimPaterson]

There were some problems with older versions of Fusion's grbl post. Make sure you're using the latest, version 44161.

[creepyflyer]

Thank you tim can you please direct me where to find this version and how to install it please searching the internet on grbl post version 44161 gets me nowhere greets kurt

…

------ Oorspronkelijke bericht ------ Van "Tim Paterson" ***@***.***> Aan "TimPaterson/Fusion360-Batch-Post" ***@***.***> CC "creepyflyer" ***@***.***>; "Author" ***@***.***> Datum 29/01/2025 20:56:07 Onderwerp Re: [TimPaterson/Fusion360-Batch-Post] post process all not working (Issue #77)

There were some problems with older versions of Fusion's grbl post. Make sure you're using the latest, version 44161. — Reply to this email directly, view it on GitHub <#77 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A3OGLVHL6W66WBIO5MSGTZD2NEW5LAVCNFSM6AAAAABV63LPUKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMRSG4YDONZQGE>. You are receiving this because you authored the thread.Message ID: ***@***.***>

[TimPaterson]

I am not a tutor in Fusion basics. In the Fusion Manufacture workspace, open Post Library from the Manage menu. Select the Fusion library, and type grbl in the search box. Right click on the post and export it to your computer. Then when you run PostProcessAll, point it to where you save the post.

[creepyflyer]

updated the grbl to version 44161 i get the same error

…

------ Oorspronkelijke bericht ------ Van "Tim Paterson" ***@***.***> Aan "TimPaterson/Fusion360-Batch-Post" ***@***.***> CC "creepyflyer" ***@***.***>; "Author" ***@***.***> Datum 30/01/2025 19:29:09 Onderwerp Re: [TimPaterson/Fusion360-Batch-Post] post process all not working (Issue #77)

I am not a tutor in Fusion basics. In the Fusion Manufacture workspace, open Post Library from the Manage menu. Select the Fusion library, and type grbl in the search box. Right click on the post and export it to your computer. Then when you run PostProcessAll, point it to where you save the post. — Reply to this email directly, view it on GitHub <#77 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A3OGLVB6I227PPGDSLX6XOD2NJVPFAVCNFSM6AAAAABV63LPUKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMRVGI3DIOJSGA>. You are receiving this because you authored the thread.Message ID: ***@***.***>

[gerritv]

take a look at this posting, make sure that check box is checked. #42 (comment)