Microsoft Visual Studio Code server is supported from firmware 27. For older firmware on 32-bit devices use packages provided in this repo. There are currently two methods to connect remote from the VS-Code IDE; with the Remote SSH extension or with the Remote Tunnels extension.
See also issues and discussion section.
VS-Code will download the server bits and need enough space. Also we need some space for apps and extensions. A good way to start is the default 'admin' user-space (not root).
PFC300 or Edge Controller is prefered because these devices provides enough CPU power and RAM for the connection. Other devices will also work, but are slower to connect etc.
Install the ipk's in Web Based Management (WBM) software upload tab (select 'force install' if notified).
Can be skipped for FW >= 27.
If we want to use the the remote SSH extension (instead of tunneling) we must change the settings for SSH-server Dropbear:
nano /etc/dropbear/dropbear.confThen enable for 'local port forwarding':
LOCAL_PORT_FORWARDING=trueSave the file and restart controller (or restart dropbear).
Open VS-Code and install 'Remote - SSH' extension. Guideline is found in the extension.
https://code.visualstudio.com/docs/remote/ssh
Open VS-Code and install 'Remote - Tunnels' extension. Guideline is found in the extension.
Download and unpack the cli-server from microsoft.com, then start the tunnel as admin:
./code tunnelhttps://code.visualstudio.com/docs/remote/tunnels
Exampels:
Create a tunnel as described in this repo then make a startup script of your own.
touch /etc/init.d/vscode && chmod +x /etc/init.d/vscodeAdd symlink:
ln -s /etc/init.d/vscode /etc/rc.d/S99_z1_vscodeEdit 'vscode' script with this content:
cd /home/admin
su -c './code tunnel --accept-server-license-terms' adminReboot the controller and test the connection.