WAS Node Fail - ComfyUI "reds-out" WAS Nodes

[Torcelllo]

Nothing fixes this, sadly!

[Torcelllo]

I went to the folder - performed git pull - said all was up-to-date!

[stephantual]

Did you try to uninstall/reinstall? I get this sometimes when one of my 3901391 nodes decides to act up.

[WASasquatch]

Commonly with WAS-NS is installing it first and then bunch of other stuff updating dependencies that needs to be pinned.

[Torcelllo]

Uninstall/reinstall did not fix

[WASasquatch]

You would have errors in your console. None of this helps diagnose anything, especially from a third party installer.

[stephantual]

He means the terminal from which you started comfy ui. there should be an error log there.

[Torcelllo]

IMPORT FAILED

[Torcelllo]

For some reason, several of my Custom Nodes are simply IMPORT FAILED - including WAS

[Torcelllo]

Cannot import B:\ComfyUI\custom_nodes\was-node-suite-comfyui module for custom nodes: Command '['C:\Users\john_\AppData\Local\Programs\Python\Python310\python.exe', '-s', '-m', 'pip', 'freeze']' returned non-zero exit status 2

[stephantual]

Yeah i upgraded today to the latest comfy and when i fetched the updates from the manager, 4 failed including WAS. I checked and they are functional though - i'm sorry to hear it's not the case for you. I'm not sure how i can help - it's difficult without being in front of the machine at this point.

[WASasquatch]

My biggest advice is to not use Manager for WAS-NS. It's cool, but has no concept of order things should be installed. WAS-NS should be installed last because it will downgrade modules to use older code. For example, I support BLIP while transformers has abandoned it for BLIP2 which no one can run right in ComfyUI on consumer GPUs and negligent to move to and focus on.

[kyrvas48]

Hello @WASasquatch - I like your handle; Happy New Year!
I don't have an answer but do have additional information and a Mac Terminal Log. Also, WAS node types failed to load BEFORE using the Manager to “Install Missing Custom Nodes”.

WAS “node types not found” Error in ComfyUI workflow

Hardware: Mac M1 Mini silicon
Software: Mac Terminal

Installed was-node-suite-comfyui into:

/ComfyUI/custom_nodes/ folder

git clone https://github.com/WASasquatch/was-node-suite-comfyui.git

Mac Terminal log:

Cloning into 'was-node-suite-comfyui'...
remote: Enumerating objects: 1942, done.
remote: Counting objects: 100% (530/530), done.
remote: Compressing objects: 100% (125/125), done.
remote: Total 1942 (delta 467), reused 440 (delta 405), pack-reused 1412
Receiving objects: 100% (1942/1942), 21.22 MiB | 17.52 MiB/s, done.
Resolving deltas: 100% (1231/1231), done.

custom_nodes Folder:
was-node-suite-comfyui folder = 32 MB

ComfyUI Local Server:
ComfyUI “node types not found” error after loading a Comfy workflow with WAS nodes:

When loading the graph, the following node types were not found:
• CLIPSeg Masking
• Mask Dominant Region
• Image Resize
• Image Filter Adjustments
• Image Crop Location
• Mask Crop Region
• Image Blend
• KSampler Cycle
• CLIPTextEncode (BlenderNeko Advanced + NSP)
• Image Lucy Sharpen
• Image Paste Crop
• Text Multiline
• Image Save
• Constant Number
Nodes that have failed to load will show as red on the graph.

Manager:
“Install Missing Custom Nodes” error result:

NOTE: PowerNoiseSuite loaded as a separate folder; these nodes, although in the workflow, are not listed in ‘failed to load above”.

Thank you for considering this additional information.

[WASasquatch]

Yes you have to restart ComfyUI before Manager even installs the custom nodes. WAS-NS should be installed last as it needs to downgrade modules. If it fails to launch *after* installation you can try the force/retry install. Additionally, WAS-NS has its own `install.bat` you can run after it's cloned.

…

On Mon, Jan 8, 2024, 1:47 PM kyrvas48 ***@***.***> wrote: Hello @WASasquatch <https://github.com/WASasquatch> - I like your handle; Happy New Year! I don't have an answer but do have additional information and a Mac Terminal Log. Also, WAS node types failed to load BEFORE using the Manager to “Install Missing Custom Nodes”. *WAS “node types not found” Error in ComfyUI workflow* Hardware: Mac M1 Mini silicon Software: Mac Terminal Installed was-node-suite-comfyui into: /ComfyUI/custom_nodes/ folder git clone https://github.com/WASasquatch/was-node-suite-comfyui.git Mac Terminal log: Cloning into 'was-node-suite-comfyui'... remote: Enumerating objects: 1942, done. remote: Counting objects: 100% (530/530), done. remote: Compressing objects: 100% (125/125), done. remote: Total 1942 (delta 467), reused 440 (delta 405), pack-reused 1412 Receiving objects: 100% (1942/1942), 21.22 MiB | 17.52 MiB/s, done. Resolving deltas: 100% (1231/1231), done. custom_nodes Folder: was-node-suite-comfyui folder = 32 MB ComfyUI Local Server: ComfyUI “node types not found” error after loading a Comfy workflow with WAS nodes: When loading the graph, the following node types were not found: • CLIPSeg Masking • Mask Dominant Region • Image Resize • Image Filter Adjustments • Image Crop Location • Mask Crop Region • Image Blend • KSampler Cycle • CLIPTextEncode (BlenderNeko Advanced + NSP) • Image Lucy Sharpen • Image Paste Crop • Text Multiline • Image Save • Constant Number Nodes that have failed to load will show as red on the graph. Manager: “Install Missing Custom Nodes” error result: WAS.Node.Suite_Disable.Uninstall.png (view on web) <https://github.com/WASasquatch/was-node-suite-comfyui/assets/139254762/5dc36049-990e-4ccf-bd1a-fb606809ffd0> NOTE: PowerNoiseSuite loaded as a separate folder; these nodes, although in the workflow, are not listed in ‘failed to load above”. Thank you for considering this additional information. — Reply to this email directly, view it on GitHub <#319 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAIZEZPES26WT7XRTNGNRI3YNRSNLAVCNFSM6AAAAABBOPJLZ6VHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DANJWGE4TO> . You are receiving this because you were mentioned.Message ID: <WASasquatch/was-node-suite-comfyui/repo-discussions/319/comments/8056197@ github.com>

[kyrvas48]

Thank you for your response. I believe I followed your instructions but
on loading a workflow, I get the “node types not found” for WAS.
force/retry - how do I do this?

'Install.bat' executes an .exe file which is not compatible with Mac OS.

[WASasquatch]

You'll need to re-install the requirements, regardless. So you need to run the requirements file against your comfy environment

…

On Tue, Jan 9, 2024, 8:04 PM kyrvas48 ***@***.***> wrote: Thank you for your response. I believe I followed your instructions but on loading a workflow, I get the “node types not found” for WAS. force/retry - how do I do this? 'Install.bat' executes an .exe file which is not compatible with Mac OS. — Reply to this email directly, view it on GitHub <#319 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAIZEZN5NEBUVIFWUFDPMILYNYHN3AVCNFSM6AAAAABBOPJLZ6VHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DANZVGA4TE> . You are receiving this because you were mentioned.Message ID: <WASasquatch/was-node-suite-comfyui/repo-discussions/319/comments/8075092@ github.com>