diff --git a/.gitattributes b/.gitattributes
new file mode 100644
index 0000000..1ff0c42
--- /dev/null
+++ b/.gitattributes
@@ -0,0 +1,63 @@
+###############################################################################
+# Set default behavior to automatically normalize line endings.
+###############################################################################
+* text=auto
+
+###############################################################################
+# Set default behavior for command prompt diff.
+#
+# This is need for earlier builds of msysgit that does not have it on by
+# default for csharp files.
+# Note: This is only used by command line
+###############################################################################
+#*.cs     diff=csharp
+
+###############################################################################
+# Set the merge driver for project and solution files
+#
+# Merging from the command prompt will add diff markers to the files if there
+# are conflicts (Merging from VS is not affected by the settings below, in VS
+# the diff markers are never inserted). Diff markers may cause the following 
+# file extensions to fail to load in VS. An alternative would be to treat
+# these files as binary and thus will always conflict and require user
+# intervention with every merge. To do so, just uncomment the entries below
+###############################################################################
+#*.sln       merge=binary
+#*.csproj    merge=binary
+#*.vbproj    merge=binary
+#*.vcxproj   merge=binary
+#*.vcproj    merge=binary
+#*.dbproj    merge=binary
+#*.fsproj    merge=binary
+#*.lsproj    merge=binary
+#*.wixproj   merge=binary
+#*.modelproj merge=binary
+#*.sqlproj   merge=binary
+#*.wwaproj   merge=binary
+
+###############################################################################
+# behavior for image files
+#
+# image files are treated as binary by default.
+###############################################################################
+#*.jpg   binary
+#*.png   binary
+#*.gif   binary
+
+###############################################################################
+# diff behavior for common document formats
+# 
+# Convert binary document formats to text before diffing them. This feature
+# is only available from the command line. Turn it on by uncommenting the 
+# entries below.
+###############################################################################
+#*.doc   diff=astextplain
+#*.DOC   diff=astextplain
+#*.docx  diff=astextplain
+#*.DOCX  diff=astextplain
+#*.dot   diff=astextplain
+#*.DOT   diff=astextplain
+#*.pdf   diff=astextplain
+#*.PDF   diff=astextplain
+#*.rtf   diff=astextplain
+#*.RTF   diff=astextplain
diff --git a/.gitignore b/.gitignore
new file mode 100644
index 0000000..4ce6fdd
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1,340 @@
+## Ignore Visual Studio temporary files, build results, and
+## files generated by popular Visual Studio add-ons.
+##
+## Get latest from https://github.com/github/gitignore/blob/master/VisualStudio.gitignore
+
+# User-specific files
+*.rsuser
+*.suo
+*.user
+*.userosscache
+*.sln.docstates
+
+# User-specific files (MonoDevelop/Xamarin Studio)
+*.userprefs
+
+# Build results
+[Dd]ebug/
+[Dd]ebugPublic/
+[Rr]elease/
+[Rr]eleases/
+x64/
+x86/
+[Aa][Rr][Mm]/
+[Aa][Rr][Mm]64/
+bld/
+[Bb]in/
+[Oo]bj/
+[Ll]og/
+
+# Visual Studio 2015/2017 cache/options directory
+.vs/
+# Uncomment if you have tasks that create the project's static files in wwwroot
+#wwwroot/
+
+# Visual Studio 2017 auto generated files
+Generated\ Files/
+
+# MSTest test Results
+[Tt]est[Rr]esult*/
+[Bb]uild[Ll]og.*
+
+# NUNIT
+*.VisualState.xml
+TestResult.xml
+
+# Build Results of an ATL Project
+[Dd]ebugPS/
+[Rr]eleasePS/
+dlldata.c
+
+# Benchmark Results
+BenchmarkDotNet.Artifacts/
+
+# .NET Core
+project.lock.json
+project.fragment.lock.json
+artifacts/
+
+# StyleCop
+StyleCopReport.xml
+
+# Files built by Visual Studio
+*_i.c
+*_p.c
+*_h.h
+*.ilk
+*.meta
+*.obj
+*.iobj
+*.pch
+*.pdb
+*.ipdb
+*.pgc
+*.pgd
+*.rsp
+*.sbr
+*.tlb
+*.tli
+*.tlh
+*.tmp
+*.tmp_proj
+*_wpftmp.csproj
+*.log
+*.vspscc
+*.vssscc
+.builds
+*.pidb
+*.svclog
+*.scc
+
+# Chutzpah Test files
+_Chutzpah*
+
+# Visual C++ cache files
+ipch/
+*.aps
+*.ncb
+*.opendb
+*.opensdf
+*.sdf
+*.cachefile
+*.VC.db
+*.VC.VC.opendb
+
+# Visual Studio profiler
+*.psess
+*.vsp
+*.vspx
+*.sap
+
+# Visual Studio Trace Files
+*.e2e
+
+# TFS 2012 Local Workspace
+$tf/
+
+# Guidance Automation Toolkit
+*.gpState
+
+# ReSharper is a .NET coding add-in
+_ReSharper*/
+*.[Rr]e[Ss]harper
+*.DotSettings.user
+
+# JustCode is a .NET coding add-in
+.JustCode
+
+# TeamCity is a build add-in
+_TeamCity*
+
+# DotCover is a Code Coverage Tool
+*.dotCover
+
+# AxoCover is a Code Coverage Tool
+.axoCover/*
+!.axoCover/settings.json
+
+# Visual Studio code coverage results
+*.coverage
+*.coveragexml
+
+# NCrunch
+_NCrunch_*
+.*crunch*.local.xml
+nCrunchTemp_*
+
+# MightyMoose
+*.mm.*
+AutoTest.Net/
+
+# Web workbench (sass)
+.sass-cache/
+
+# Installshield output folder
+[Ee]xpress/
+
+# DocProject is a documentation generator add-in
+DocProject/buildhelp/
+DocProject/Help/*.HxT
+DocProject/Help/*.HxC
+DocProject/Help/*.hhc
+DocProject/Help/*.hhk
+DocProject/Help/*.hhp
+DocProject/Help/Html2
+DocProject/Help/html
+
+# Click-Once directory
+publish/
+
+# Publish Web Output
+*.[Pp]ublish.xml
+*.azurePubxml
+# Note: Comment the next line if you want to checkin your web deploy settings,
+# but database connection strings (with potential passwords) will be unencrypted
+*.pubxml
+*.publishproj
+
+# Microsoft Azure Web App publish settings. Comment the next line if you want to
+# checkin your Azure Web App publish settings, but sensitive information contained
+# in these scripts will be unencrypted
+PublishScripts/
+
+# NuGet Packages
+*.nupkg
+# The packages folder can be ignored because of Package Restore
+**/[Pp]ackages/*
+# except build/, which is used as an MSBuild target.
+!**/[Pp]ackages/build/
+# Uncomment if necessary however generally it will be regenerated when needed
+#!**/[Pp]ackages/repositories.config
+# NuGet v3's project.json files produces more ignorable files
+*.nuget.props
+*.nuget.targets
+
+# Microsoft Azure Build Output
+csx/
+*.build.csdef
+
+# Microsoft Azure Emulator
+ecf/
+rcf/
+
+# Windows Store app package directories and files
+AppPackages/
+BundleArtifacts/
+Package.StoreAssociation.xml
+_pkginfo.txt
+*.appx
+
+# Visual Studio cache files
+# files ending in .cache can be ignored
+*.[Cc]ache
+# but keep track of directories ending in .cache
+!?*.[Cc]ache/
+
+# Others
+ClientBin/
+~$*
+*~
+*.dbmdl
+*.dbproj.schemaview
+*.jfm
+*.pfx
+*.publishsettings
+orleans.codegen.cs
+
+# Including strong name files can present a security risk
+# (https://github.com/github/gitignore/pull/2483#issue-259490424)
+#*.snk
+
+# Since there are multiple workflows, uncomment next line to ignore bower_components
+# (https://github.com/github/gitignore/pull/1529#issuecomment-104372622)
+#bower_components/
+
+# RIA/Silverlight projects
+Generated_Code/
+
+# Backup & report files from converting an old project file
+# to a newer Visual Studio version. Backup files are not needed,
+# because we have git ;-)
+_UpgradeReport_Files/
+Backup*/
+UpgradeLog*.XML
+UpgradeLog*.htm
+ServiceFabricBackup/
+*.rptproj.bak
+
+# SQL Server files
+*.mdf
+*.ldf
+*.ndf
+
+# Business Intelligence projects
+*.rdl.data
+*.bim.layout
+*.bim_*.settings
+*.rptproj.rsuser
+*- Backup*.rdl
+
+# Microsoft Fakes
+FakesAssemblies/
+
+# GhostDoc plugin setting file
+*.GhostDoc.xml
+
+# Node.js Tools for Visual Studio
+.ntvs_analysis.dat
+node_modules/
+
+# Visual Studio 6 build log
+*.plg
+
+# Visual Studio 6 workspace options file
+*.opt
+
+# Visual Studio 6 auto-generated workspace file (contains which files were open etc.)
+*.vbw
+
+# Visual Studio LightSwitch build output
+**/*.HTMLClient/GeneratedArtifacts
+**/*.DesktopClient/GeneratedArtifacts
+**/*.DesktopClient/ModelManifest.xml
+**/*.Server/GeneratedArtifacts
+**/*.Server/ModelManifest.xml
+_Pvt_Extensions
+
+# Paket dependency manager
+.paket/paket.exe
+paket-files/
+
+# FAKE - F# Make
+.fake/
+
+# JetBrains Rider
+.idea/
+*.sln.iml
+
+# CodeRush personal settings
+.cr/personal
+
+# Python Tools for Visual Studio (PTVS)
+__pycache__/
+*.pyc
+
+# Cake - Uncomment if you are using it
+# tools/**
+# !tools/packages.config
+
+# Tabs Studio
+*.tss
+
+# Telerik's JustMock configuration file
+*.jmconfig
+
+# BizTalk build output
+*.btp.cs
+*.btm.cs
+*.odx.cs
+*.xsd.cs
+
+# OpenCover UI analysis results
+OpenCover/
+
+# Azure Stream Analytics local run output
+ASALocalRun/
+
+# MSBuild Binary and Structured Log
+*.binlog
+
+# NVidia Nsight GPU debugger configuration file
+*.nvuser
+
+# MFractors (Xamarin productivity tool) working folder
+.mfractor/
+
+# Local History for Visual Studio
+.localhistory/
+
+# BeatPulse healthcheck temp database
+healthchecksdb
\ No newline at end of file
diff --git a/LICENSE b/LICENSE
new file mode 100644
index 0000000..f288702
--- /dev/null
+++ b/LICENSE
@@ -0,0 +1,674 @@
+                    GNU GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+                            Preamble
+
+  The GNU General Public License is a free, copyleft license for
+software and other kinds of works.
+
+  The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works.  By contrast,
+the GNU General Public License is intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users.  We, the Free Software Foundation, use the
+GNU General Public License for most of our software; it applies also to
+any other work released this way by its authors.  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
+
+  To protect your rights, we need to prevent others from denying you
+these rights or asking you to surrender the rights.  Therefore, you have
+certain responsibilities if you distribute copies of the software, or if
+you modify it: responsibilities to respect the freedom of others.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must pass on to the recipients the same
+freedoms that you received.  You must make sure that they, too, receive
+or can get the source code.  And you must show them these terms so they
+know their rights.
+
+  Developers that use the GNU GPL protect your rights with two steps:
+(1) assert copyright on the software, and (2) offer you this License
+giving you legal permission to copy, distribute and/or modify it.
+
+  For the developers' and authors' protection, the GPL clearly explains
+that there is no warranty for this free software.  For both users' and
+authors' sake, the GPL requires that modified versions be marked as
+changed, so that their problems will not be attributed erroneously to
+authors of previous versions.
+
+  Some devices are designed to deny users access to install or run
+modified versions of the software inside them, although the manufacturer
+can do so.  This is fundamentally incompatible with the aim of
+protecting users' freedom to change the software.  The systematic
+pattern of such abuse occurs in the area of products for individuals to
+use, which is precisely where it is most unacceptable.  Therefore, we
+have designed this version of the GPL to prohibit the practice for those
+products.  If such problems arise substantially in other domains, we
+stand ready to extend this provision to those domains in future versions
+of the GPL, as needed to protect the freedom of users.
+
+  Finally, every program is threatened constantly by software patents.
+States should not allow patents to restrict development and use of
+software on general-purpose computers, but in those that do, we wish to
+avoid the special danger that patents applied to a free program could
+make it effectively proprietary.  To prevent this, the GPL assures that
+patents cannot be used to render the program non-free.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                       TERMS AND CONDITIONS
+
+  0. Definitions.
+
+  "This License" refers to version 3 of the GNU General Public License.
+
+  "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
+
+  "The Program" refers to any copyrightable work licensed under this
+License.  Each licensee is addressed as "you".  "Licensees" and
+"recipients" may be individuals or organizations.
+
+  To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy.  The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
+
+  A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+  To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy.  Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+  To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies.  Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
+
+  An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License.  If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+  1. Source Code.
+
+  The "source code" for a work means the preferred form of the work
+for making modifications to it.  "Object code" means any non-source
+form of a work.
+
+  A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+  The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form.  A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+  The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities.  However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work.  For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+  The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
+
+  The Corresponding Source for a work in source code form is that
+same work.
+
+  2. Basic Permissions.
+
+  All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met.  This License explicitly affirms your unlimited
+permission to run the unmodified Program.  The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work.  This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+  You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force.  You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright.  Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
+
+  Conveying under any other circumstances is permitted solely under
+the conditions stated below.  Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+  No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+  When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+  4. Conveying Verbatim Copies.
+
+  You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+  You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+  5. Conveying Modified Source Versions.
+
+  You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+    a) The work must carry prominent notices stating that you modified
+    it, and giving a relevant date.
+
+    b) The work must carry prominent notices stating that it is
+    released under this License and any conditions added under section
+    7.  This requirement modifies the requirement in section 4 to
+    "keep intact all notices".
+
+    c) You must license the entire work, as a whole, under this
+    License to anyone who comes into possession of a copy.  This
+    License will therefore apply, along with any applicable section 7
+    additional terms, to the whole of the work, and all its parts,
+    regardless of how they are packaged.  This License gives no
+    permission to license the work in any other way, but it does not
+    invalidate such permission if you have separately received it.
+
+    d) If the work has interactive user interfaces, each must display
+    Appropriate Legal Notices; however, if the Program has interactive
+    interfaces that do not display Appropriate Legal Notices, your
+    work need not make them do so.
+
+  A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit.  Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+  6. Conveying Non-Source Forms.
+
+  You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+    a) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by the
+    Corresponding Source fixed on a durable physical medium
+    customarily used for software interchange.
+
+    b) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by a
+    written offer, valid for at least three years and valid for as
+    long as you offer spare parts or customer support for that product
+    model, to give anyone who possesses the object code either (1) a
+    copy of the Corresponding Source for all the software in the
+    product that is covered by this License, on a durable physical
+    medium customarily used for software interchange, for a price no
+    more than your reasonable cost of physically performing this
+    conveying of source, or (2) access to copy the
+    Corresponding Source from a network server at no charge.
+
+    c) Convey individual copies of the object code with a copy of the
+    written offer to provide the Corresponding Source.  This
+    alternative is allowed only occasionally and noncommercially, and
+    only if you received the object code with such an offer, in accord
+    with subsection 6b.
+
+    d) Convey the object code by offering access from a designated
+    place (gratis or for a charge), and offer equivalent access to the
+    Corresponding Source in the same way through the same place at no
+    further charge.  You need not require recipients to copy the
+    Corresponding Source along with the object code.  If the place to
+    copy the object code is a network server, the Corresponding Source
+    may be on a different server (operated by you or a third party)
+    that supports equivalent copying facilities, provided you maintain
+    clear directions next to the object code saying where to find the
+    Corresponding Source.  Regardless of what server hosts the
+    Corresponding Source, you remain obligated to ensure that it is
+    available for as long as needed to satisfy these requirements.
+
+    e) Convey the object code using peer-to-peer transmission, provided
+    you inform other peers where the object code and Corresponding
+    Source of the work are being offered to the general public at no
+    charge under subsection 6d.
+
+  A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+  A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling.  In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage.  For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product.  A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+  "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source.  The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+  If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information.  But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+  The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed.  Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+  Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+  7. Additional Terms.
+
+  "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law.  If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+  When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it.  (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.)  You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+  Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+    a) Disclaiming warranty or limiting liability differently from the
+    terms of sections 15 and 16 of this License; or
+
+    b) Requiring preservation of specified reasonable legal notices or
+    author attributions in that material or in the Appropriate Legal
+    Notices displayed by works containing it; or
+
+    c) Prohibiting misrepresentation of the origin of that material, or
+    requiring that modified versions of such material be marked in
+    reasonable ways as different from the original version; or
+
+    d) Limiting the use for publicity purposes of names of licensors or
+    authors of the material; or
+
+    e) Declining to grant rights under trademark law for use of some
+    trade names, trademarks, or service marks; or
+
+    f) Requiring indemnification of licensors and authors of that
+    material by anyone who conveys the material (or modified versions of
+    it) with contractual assumptions of liability to the recipient, for
+    any liability that these contractual assumptions directly impose on
+    those licensors and authors.
+
+  All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10.  If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term.  If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+  If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+  Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+  8. Termination.
+
+  You may not propagate or modify a covered work except as expressly
+provided under this License.  Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+  However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+  Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+  Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+  9. Acceptance Not Required for Having Copies.
+
+  You are not required to accept this License in order to receive or
+run a copy of the Program.  Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance.  However,
+nothing other than this License grants you permission to propagate or
+modify any covered work.  These actions infringe copyright if you do
+not accept this License.  Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+  10. Automatic Licensing of Downstream Recipients.
+
+  Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License.  You are not responsible
+for enforcing compliance by third parties with this License.
+
+  An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations.  If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+  You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License.  For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+  11. Patents.
+
+  A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based.  The
+work thus licensed is called the contributor's "contributor version".
+
+  A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version.  For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+  Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+  In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement).  To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+  If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients.  "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+  If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+  A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License.  You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+  Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+  12. No Surrender of Others' Freedom.
+
+  If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all.  For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
+
+  13. Use with the GNU Affero General Public License.
+
+  Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU Affero General Public License into a single
+combined work, and to convey the resulting work.  The terms of this
+License will continue to apply to the part which is the covered work,
+but the special requirements of the GNU Affero General Public License,
+section 13, concerning interaction through a network will apply to the
+combination as such.
+
+  14. Revised Versions of this License.
+
+  The Free Software Foundation may publish revised and/or new versions of
+the GNU General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+  Each version is given a distinguishing version number.  If the
+Program specifies that a certain numbered version of the GNU General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation.  If the Program does not specify a version number of the
+GNU General Public License, you may choose any version ever published
+by the Free Software Foundation.
+
+  If the Program specifies that a proxy can decide which future
+versions of the GNU General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
+
+  Later license versions may give you additional or different
+permissions.  However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+  15. Disclaimer of Warranty.
+
+  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. Limitation of Liability.
+
+  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+  17. Interpretation of Sections 15 and 16.
+
+  If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+                     END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+state the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+Also add information on how to contact you by electronic and paper mail.
+
+  If the program does terminal interaction, make it output a short
+notice like this when it starts in an interactive mode:
+
+    <program>  Copyright (C) <year>  <name of author>
+    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, your program's commands
+might be different; for a GUI interface, you would use an "about box".
+
+  You should also get your employer (if you work as a programmer) or school,
+if any, to sign a "copyright disclaimer" for the program, if necessary.
+For more information on this, and how to apply and follow the GNU GPL, see
+<https://www.gnu.org/licenses/>.
+
+  The GNU General Public License does not permit incorporating your program
+into proprietary programs.  If your program is a subroutine library, you
+may consider it more useful to permit linking proprietary applications with
+the library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.  But first, please read
+<https://www.gnu.org/licenses/why-not-lgpl.html>.
diff --git a/Properties/AssemblyInfo.cs b/Properties/AssemblyInfo.cs
new file mode 100644
index 0000000..e6b69b7
--- /dev/null
+++ b/Properties/AssemblyInfo.cs
@@ -0,0 +1,35 @@
+using System.Reflection;
+using System.Runtime.InteropServices;
+
+// General Information about an assembly is controlled through the following
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+[assembly: AssemblyTitle("SettingsRedux")]
+[assembly: AssemblyDescription("Replaces the Neos Settings page with something new")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("XDelta")]
+[assembly: AssemblyProduct("SettingsRedux")]
+[assembly: AssemblyCopyright("Copyright © XDelta 2022")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// Setting ComVisible to false makes the types in this assembly not visible
+// to COM components.  If you need to access a type in this assembly from
+// COM, set the ComVisible attribute to true on that type.
+[assembly: ComVisible(false)]
+
+// The following GUID is for the ID of the typelib if this project is exposed to COM
+[assembly: Guid("597a16af-ac61-46fa-8f21-1ad4f1a2d857")]
+
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Build and Revision Numbers
+// by using the '*' as shown below:
+// [assembly: AssemblyVersion("1.0.*")]
+[assembly: AssemblyVersion("1.0.0.0")]
+[assembly: AssemblyFileVersion("1.0.0.0")]
diff --git a/README.md b/README.md
index 3d0d78e..75886f7 100644
--- a/README.md
+++ b/README.md
@@ -1 +1,8 @@
-# SettingsRedux
\ No newline at end of file
+# SettingsRedux
+
+A [NeosModLoader](https://github.com/neos-modding-group/NeosModLoader) mod for [Neos VR](https://neos.com/). Replaces the Neos Settings page with something new.
+
+## Installation
+1. Install [NeosModLoader](https://github.com/neos-modding-group/NeosModLoader).
+1. Place [SettingsRedux.dll](https://github.com/XDelta/SettingsRedux/releases/latest/download/SettingsRedux.dll) into your `nml_mods` folder. This folder should be at `C:\Program Files (x86)\Steam\steamapps\common\NeosVR\nml_mods` for a default install. You can create it if it's missing, or if you launch the game once with NeosModLoader installed it will create the folder for you.
+1. Start the game. If you want to verify that the mod is working you can check your Neos logs.
\ No newline at end of file
diff --git a/SettingsRedux.cs b/SettingsRedux.cs
new file mode 100644
index 0000000..0638b77
--- /dev/null
+++ b/SettingsRedux.cs
@@ -0,0 +1,483 @@
+using System;
+using BaseX;
+using FrooxEngine;
+using FrooxEngine.UIX;
+using static FrooxEngine.LocaleHelper;
+using HarmonyLib;
+using NeosModLoader;
+using System.Collections.Generic;
+using FrooxEngine.CommonAvatar;
+using System.Linq;
+using QuantityX;
+using System.Reflection;
+using System.Threading.Tasks;
+
+namespace SettingsRedux {
+	public class SettingsRedux : NeosMod {
+		public override string Name => "SettingsRedux";
+		public override string Author => "XDelta";
+		public override string Version => "1.0.0";
+		public override string Link => "https://github.com/XDelta/SettingsRedux";
+
+		[AutoRegisterConfigKey]
+		private static readonly ModConfigurationKey<bool> enableSettingReplacement = new ModConfigurationKey<bool>("enableSettingReplacement", "Replace default Neos settings page", () => true);
+
+		private static ModConfiguration Config;
+
+		public override void OnEngineInit() {
+			Config = GetConfiguration();
+			Config.Save(true);
+			Harmony harmony = new Harmony("tk.deltawolf.SettingsRedux");
+			harmony.PatchAll();
+			Config.OnThisConfigurationChanged += delegate { SettingsDialog_OnAttach_Patch.HideDefaultUi(); };
+		}
+
+		public enum Tabs {
+			Audio,
+			Controls,
+			Video,
+			Network,
+			Misc
+		}
+
+		[HarmonyPatch(typeof(SettingsDialog), "OnAttach")]
+		class SettingsDialog_OnAttach_Patch {
+
+			private static SettingsDialog settingsDialog;
+			private static SlideSwapRegion _slideSwap;
+			private static SyncRef<QuantityTextEditorParser<Distance>> _heightField;
+			private static Sync<bool> _useImperial;
+			private static MethodInfo _OnSaveMethod;
+
+			private static Tabs ActiveTab = Tabs.Audio;
+			private static AudioSettingSync audioSettingSync;
+			private static float DefaultUiScale = 28f;
+
+			//private static SyncRefList<Button> _tabButtons; //.Add() always caused a NRE
+			private static Button b1;
+			private static Button b2;
+			private static Button b3;
+			private static Button b4;
+			private static Button b5;
+
+			//Nested patch
+			[HarmonyPatch(typeof(Userspace), "OnCommonUpdate")]
+			class TabSwitch_OnCommonUpdate {
+				public static void Postfix() {
+					if (b5 != null) {
+						b1.SetColors(RadiantUI_Constants.BUTTON_COLOR);
+						b2.SetColors(RadiantUI_Constants.BUTTON_COLOR);
+						b3.SetColors(RadiantUI_Constants.BUTTON_COLOR);
+						b4.SetColors(RadiantUI_Constants.BUTTON_COLOR);
+						b5.SetColors(RadiantUI_Constants.BUTTON_COLOR);
+
+						switch (ActiveTab) {
+							case Tabs.Audio:
+								b1.SetColors(new color(0, 0.29f, 0.78f));
+								break;
+							case Tabs.Controls:
+								b2.SetColors(new color(0, 0.29f, 0.78f));
+								break;
+							case Tabs.Video:
+								b3.SetColors(new color(0, 0.29f, 0.78f));
+								break;
+							case Tabs.Network:
+								b4.SetColors(new color(0, 0.29f, 0.78f));
+								break;
+							case Tabs.Misc:
+								b5.SetColors(new color(0, 0.29f, 0.78f));
+								break;
+							default:
+								break;
+						}
+					}
+				}
+			}
+			//TODO Don't setup the original at all?, for now it is just hidden so you can toggle between the two on the fly
+			public static void Postfix(SettingsDialog __instance) {
+				__instance.Slot.AttachComponent<DuplicateBlock>(true, null);
+				settingsDialog = __instance;
+
+				_heightField = AccessTools.Field(typeof(SettingsDialog), "_heightField").GetValue(settingsDialog) as SyncRef<QuantityTextEditorParser<Distance>>;
+				_useImperial = AccessTools.Field(typeof(SettingsDialog), "_useImperial").GetValue(settingsDialog) as Sync<bool>;
+				_OnSaveMethod = AccessTools.FirstMethod(typeof(SettingsDialog), (methodInfo) => methodInfo.Name == "OnSaveSettings");
+
+				ActiveTab = Tabs.Misc;
+				GenerateHeader();
+				HideDefaultUi();
+				GenerateUi(Tabs.Audio);
+				
+			}
+
+				public static void HideDefaultUi() {
+				if (Config.GetValue(enableSettingReplacement)) {
+					settingsDialog.Slot[0].ActiveSelf = false;
+					settingsDialog.Slot[1].ActiveSelf = false;
+					if (settingsDialog.Slot.ChildrenCount == 4) {
+						settingsDialog.Slot[2].ActiveSelf = true;
+						settingsDialog.Slot[3].ActiveSelf = true;
+					}
+				} else {
+					settingsDialog.Slot[0].ActiveSelf = true;
+					settingsDialog.Slot[1].ActiveSelf = true;
+					if (settingsDialog.Slot.ChildrenCount == 4) {
+						settingsDialog.Slot[2].ActiveSelf = false;
+						settingsDialog.Slot[3].ActiveSelf = false;
+					}
+				}
+			}
+
+			private static void GenerateHeader() {
+				UIBuilder ui = new UIBuilder(settingsDialog.Slot, null);
+				RadiantUI_Constants.SetupDefaultStyle(ui, false);
+				RectTransform top;
+				RectTransform bottom;
+				ui.SplitVertically(0.05f, out top, out bottom, 0.02f);
+				ui.NestInto(top);
+				ui.HorizontalLayout(4);
+
+				Button tabAudio = ui.Button("Audio");
+				tabAudio.LocalPressed += TabAudio;
+				Button tabControl = ui.Button("Controls");
+				tabControl.LocalPressed += TabControls;
+				Button tabVideo = ui.Button("Video");
+				tabVideo.LocalPressed += TabVideo;
+				Button tabNetwork = ui.Button("Network");
+				tabNetwork.LocalPressed += TabNetwork;
+				Button tabMisc = ui.Button("Misc");
+				tabMisc.LocalPressed += TabMisc;
+
+				b1 = tabAudio;
+				b2 = tabControl;
+				b3 = tabVideo;
+				b4 = tabNetwork;
+				b5 = tabMisc;
+
+				ui.NestOut();
+				_slideSwap = bottom.Slot.AttachComponent<SlideSwapRegion>(true, null);
+				audioSettingSync = ui.Current.AttachComponent<AudioSettingSync>(true, null);
+			}
+
+			private static void TabAudio(IButton button, ButtonEventData data) { GenerateUi(Tabs.Audio); }
+			private static void TabControls(IButton button, ButtonEventData data) { GenerateUi(Tabs.Controls); }
+			private static void TabVideo(IButton button, ButtonEventData data) { GenerateUi(Tabs.Video); }
+			private static void TabNetwork(IButton button, ButtonEventData data) { GenerateUi(Tabs.Network); }
+			private static void TabMisc(IButton button, ButtonEventData data) { GenerateUi(Tabs.Misc); }
+
+			public static void GenerateUi(Tabs tab) {
+				Msg("GenerateUi for tab: " + tab.ToString());
+				SlideSwapRegion.Slide slide;
+				slide = SlideVec(tab);
+				if (tab == ActiveTab) { return; } /*Set tab is already active, don't generate anything new*/
+				UIBuilder ui = _slideSwap.Swap(slide, 0.5f);
+				UpdateActiveTab(tab);
+
+				RadiantUI_Constants.SetupDefaultStyle(ui, false);
+				RectTransform top;
+				RectTransform bottom;
+				ui.SplitVertically(0.05f, out top, out bottom, 0.02f);
+				ui.NestInto(top);
+				//ui.TextField(tab.ToString()); //Label the tab you are currently on
+				ui.NestOut();
+				ui.NestInto(bottom);
+
+				List<RectTransform> list = ui.SplitHorizontally(0.1f, 0.8f, 0.1f);
+				ui.NestInto(list[1]);
+
+				RadiantUI_Constants.SetupDefaultStyle(ui, false);
+
+				ui.ScrollArea(new Alignment?(Alignment.TopCenter));
+				ui.VerticalLayout(4f, 0f, null);
+				ui.FitContent(SizeFit.Disabled, SizeFit.PreferredSize);
+				ui.Style.MinHeight = DefaultUiScale;
+
+				switch (tab) {
+					case Tabs.Audio:
+						AddHeaderText(ui, "Settings.Audio.Header");
+						AddMasterAudioSlider(ui, "Settings.Audio.Master", audioSettingSync.MasterVolume);
+						AddAudioSlider(ui, "Settings.Audio.SoundEffects", AudioTypeGroup.SoundEffect);
+						AddAudioSlider(ui, "Settings.Audio.Multimedia", AudioTypeGroup.Multimedia);
+						AddAudioSlider(ui, "Settings.Audio.Voice", AudioTypeGroup.Voice);
+						AddAudioSlider(ui, "Settings.Audio.UI", AudioTypeGroup.UI);
+
+						AddCheckboxDrive(ui, "Settings.Audio.DisableVoiceNormalization", audioSettingSync.DisableNormalization);
+						AddCheckboxDrive(ui, "Settings.Audio.NoiseSupression", audioSettingSync.NoiseSupression);
+						AddMasterAudioSlider(ui, "Settings.Audio.WhisperVoiceVolume", audioSettingSync.WhisperVoiceVolume);
+						AddMasterAudioSlider(ui, "Settings.Audio.NormzliationThreshold", audioSettingSync.NormalizationThreshold);
+						AddButton(ui, "Settings.Audio.SelectInputDevice", new ButtonEventHandler(OnSelectAudioInputDevice), 2f);
+						AddButton(ui, "Settings.Audio.SelectOutputDevice", new ButtonEventHandler(OnSelectAudioOutputDevice), 2f);
+						AddButton(ui, "Settings.Save", new ButtonEventHandler(OnSaveSettings));
+						break;
+					case Tabs.Controls:
+						AddHeaderText(ui, "Height");
+						AddQuantityTextEditorField(ui, "Settings.Height", "Input.User.Height");
+						ui.HorizontalLayout(4f, 4f, null);//TODO change spacing to move apart
+						ui.ValueRadio<bool>("Settings.Metric".AsLocaleKey(null, true, null), _useImperial, false);
+						ui.ValueRadio<bool>("Settings.Imperial".AsLocaleKey(null, true, null), _useImperial, true);
+						var image = ui.CurrentRect.Slot.AttachComponent<Image>();
+						image.Tint.Value = new color(1, 1, 1, 0.2f);
+						_useImperial.SyncWithSetting(InputInterface.IMPERIAL_UNITS_SETTING, SettingSync.LocalChange.UpdateSetting);
+						ui.NestOut();
+
+						AddHeaderText(ui, "Movement");
+						UIBuilder uiEnum = ui;
+						ValueField<Chirality> primaryHand = uiEnum.CurrentRect.Slot.AttachComponent<ValueField<Chirality>>(true, null);
+						ui.HorizontalElementWithLabel<EnumMemberEditor>("Settings.PrimaryController".AsLocaleKey(null, true, null), 0.7f, () => ui.EnumMemberEditor(primaryHand.Value, null), 0.01f);
+						primaryHand.Value.Value = Chirality.Right;
+						primaryHand.Value.SyncWithSetting(InputInterface.PRIMARY_HAND_SETTING, SettingSync.LocalChange.UpdateSetting);
+
+						AddCheckbox(ui, "Settings.AllowStrafing", "Input.Strafe");
+						AddCheckbox(ui, "Settings.UseHeadDirectionForMovement", "Input.UseHeadDirection");
+						AddCheckbox(ui, "Settings.SmoothTurn", "Input.SmoothTurn.Enabled");
+						AddCheckbox(ui, "Settings.SmoothTurnExclusiveMode", "Input.SmoothTurn.ExclusiveMode");
+
+						AddFloatTextEditorField(ui, "Settings.SmoothTurnSpeed", "Input.SmoothTurn.Speed", 90f, 5f, 1440f);
+						AddFloatTextEditorField(ui, "Settings.SnapTurnAngle", "Input.SnapTurn.Angle", 45f, 5f, 180f);
+						AddFloatTextEditorField(ui, "Settings.NoclipSpeed", "Input.MovementSpeed", 15f, 1f, 200f);
+						AddFloatTextEditorField(ui, "Settings.SpeedExponent", "Input.MovementExponent", 2f, 0.2f, 10f, 2, "F2");
+						AddFloatTextEditorField(ui, "Settings.MoveThreshold", "Input.MoveThreshold", 0.15f, 0f, 0.9f, 2, "F2");
+
+						AddHeaderText(ui, "Haptics");
+						//These have a state also passed to the button, not sure what it is used for or if it is required for it to work
+						AddCheckbox(ui, "Settings.ControllerVibration", "Input.VibrationEnabled"); // InputInterface.VIBRATION_ENABLED_SETTING
+						AddCheckbox(ui, "Settings.Haptics", "Input.HapticsEnabled"); // InputInterface.HAPTICS_ENABLED_SETTING
+
+						AddHeaderText(ui, "Interaction");
+						AddCheckbox(ui, "Settings.ShowInteractionHints", "Input.ShowHints");
+						AddCheckbox(ui, "Settings.DisablePhysicalInteractions", "Input.DisablePhysicalInteractions"); // CommonTool.CurrentDisablePhysicalInteractions
+						AddFloatTextEditorField(ui, "Settings.DoubleClickInterval", "Input.DoubleClickInterval", 0.75f, 0.25f, 5f, 2, "F2");
+						AddCheckbox(ui, "Settings.EnableGestures", "Input.Gestures"); // CommonTool.CurrentGestures
+
+						AddHeaderText(ui, "Settings.FullBody.Header");
+						AddFloatTextEditorField(ui, "Settings.FullBody.FeetPositionSmoothing", AvatarObjectSlot.SmoothingSettingName(BodyNode.LeftFoot, false), -1f, -1f, 60f, 1, "F1");
+						AddFloatTextEditorField(ui, "Settings.FullBody.FeetRotationSmoothing", AvatarObjectSlot.SmoothingSettingName(BodyNode.LeftFoot, true), 20f, -1f, 60f, 1, "F1");
+						AddFloatTextEditorField(ui, "Settings.FullBody.HipsPositionSmoothing", AvatarObjectSlot.SmoothingSettingName(BodyNode.Hips, false), -1f, -1f, 60f, 1, "F1");
+						AddFloatTextEditorField(ui, "Settings.FullBody.HipsRotationSmoothing", AvatarObjectSlot.SmoothingSettingName(BodyNode.Hips, true), 20f, -1f, 60f, 1, "F1");
+
+						AddHeaderText(ui, "Settings.LaserSmoothing.Header");
+						AddFloatTextEditorField(ui, "Settings.LaserSmoothing.Speed", "Input.Laser.SmoothSpeed", 5f, 0.5f, 50f, 2, "F2");
+						AddFloatTextEditorField(ui, "Settings.LaserSmoothing.ModulateStartAngle", "Input.Laser.SmoothModulateStartAngle", 2f, 0f, 180f, 2, "F2");
+						AddFloatTextEditorField(ui, "Settings.LaserSmoothing.ModulateEndAngle", "Input.Laser.SmoothModulateEndAngle", 45f, 0f, 180f, 2, "F2");
+						AddFloatTextEditorField(ui, "Settings.LaserSmoothing.ModulateExponent", "Input.Laser.SmoothModulateExp", 0.75f, 0.1f, 10f, 2, "F2");
+
+						AddFloatTextEditorField(ui, "Settings.LaserSmoothing.ModulateSpeedMultiplier", "Input.Laser.SmoothModulateMultiplier", 8f, 0.1f, 100f, 2, "F2");
+						AddFloatTextEditorField(ui, "Settings.LaserSmoothing.StickThreshold", "Input.Laser.StickThreshold", 0.2f, 0f, 2f, 2, "F2");
+						AddButton(ui, "Settings.LaserSmoothing.Reset", new ButtonEventHandler(OnResetLaserSettings));
+						AddCheckbox(ui, "Settings.Laser.ShowInDesktop", "Input.Laser.ShowInDesktop");
+
+						break;
+					case Tabs.Video:
+						AddHeaderText(ui, "Settings.Dash.Header");
+						AddFloatTextEditorField(ui, "Settings.Dash.Curvature", "Userspace.RadiantDash.Curvature", 0.65f, 0f, 1f, 2, "F2");//has slider
+						AddSlider(ui, "Userspace.RadiantDash.Curvature",0.65f, 0f, 1f);
+						AddFloatTextEditorField(ui, "Settings.Dash.OpenCloseSpeed", "Userspace.RadiantDash.AnimationSpeed", 1.33f, 0.2f, float.PositiveInfinity, 2, "F2"); //max 10f
+						AddFloatTextEditorField(ui, "Settings.Graphics.DesktopFOV", "Settings.Graphics.DesktopFOV", 60f, 10f, 179f, 2, "F2");//has slider
+						AddSlider(ui, "Settings.Graphics.DesktopFOV", 60f, 10f, 120f);
+						break;
+					case Tabs.Network:
+						AddHeaderText(ui,"Cloud");
+						AddCheckbox(ui, "Settings.FetchIncompatibleSessions", "WorldAnnouncer.FetchIncompatibleSessions");
+						AddCheckbox(ui, "Settings.DoNotSendReadStatus", "Cloud.Messaging.DoNotSendReadStatus");
+						
+						AddHeaderText(ui, "Connection");
+						if (SteamNetworkManager.PreferSteam != null) {
+							AddCheckbox(ui, "Settings.PreferSteamNetworking", "SteamNetworkingSockets.Prefer");
+						}
+						AddCheckbox(ui, "Settings.DisableLAN", "NetworkManager.Disable"); // NetworkManager.DISABLE_LAN_SETTING //SyncWithLocalVariable?
+						AddIntTextEditorField(ui, "Settings.MaxConcurrentAssetTransfers", "Session.MaxConcurrentTransmitJobs", 4, 1, 128, 1);
+
+						break;
+					case Tabs.Misc:
+						AddHeaderText(ui, "Language");
+						AddButton(ui, "Settings.Locale.ChangeLanguage", new ButtonEventHandler(OnChangeLanguage), 2f);
+						
+						AddHeaderText(ui, "Tutorials");
+						AddCheckbox(ui, "Settings.HideAllTutorials", "Tutorials.GLOBAL.Hide"); //TutorialManager.TUTORIALS_HIDE_SETTING
+						AddButton(ui, "Settings.ResetAllTutorials", new ButtonEventHandler(OnResetTutorials), 2f);
+						
+						AddHeaderText(ui, "Legacy");
+						AddCheckbox(ui, "Settings.LegacyGripEquip", "Input.GripEquip");
+						AddCheckbox(ui, "Settings.LegacyWorldSwitcher", "Userspace.WorldSwitcher.Enabled");
+						
+						AddHeaderText(ui, "Debug");
+						AddCheckbox(ui, "Settings.DebugInputBinding", "Input.DebugInputBinding");
+
+						//AddHeaderText(ui, "");
+						//TODO hardware integrations ex. Windows, vive, bhaptics
+						//TODO Auto-save screenshot path
+						break;
+					default:
+						AddHeaderText(ui, "Invalid Tab");
+						Msg("Invalid Tab" + ActiveTab);
+						break;
+				}
+				AddSpacer(ui);
+				AltLineColor(list[1]);
+				ui.NestOut();
+			}
+
+			public static void UpdateActiveTab(Tabs tab) {
+				ActiveTab = tab;
+			}
+
+			public static void AltLineColor(RectTransform rect) {
+				var currentLine = 0;
+				var count = rect.Slot.ChildrenCount;
+				foreach (var slot in rect.Slot.GetAllChildren()) {
+					//Debug(slot.Name + ":" + currentLine);
+					if (slot.Name == "Panel" && slot.Parent.Name == "Content") {
+						if (currentLine % 2 == 1) {
+							//odd numbered
+							var image = slot.AttachComponent<Image>();
+							image.Tint.Value = new color(1, 1, 1, 0.2f);
+						}
+						currentLine += 1;
+					}
+				}
+			}
+
+			public static void AddSpacer(UIBuilder ui) {
+				ui.Spacer(DefaultUiScale);
+			}
+
+			public static void AddHeaderText(UIBuilder ui, String label) {
+				AddSpacer(ui);
+				ui.Text(label.AsLocaleKey("<b>{0}</b>", true, null), true, Alignment.MiddleLeft, true, null);
+				RectTransform sp = ui.Spacer(3f);
+				sp.Slot.AttachComponent<Image>().Tint.Value = new color(1f, 1f, 1f, 0.5f);
+			}
+
+			public static void AddButton(UIBuilder ui, string label, ButtonEventHandler method, float mult = 1f) {
+				ui.Style.MinHeight = DefaultUiScale * mult;
+				ui.Button(label.AsLocaleKey(null, true, null), method);
+				ui.Style.MinHeight = DefaultUiScale;
+			}
+
+			public static void AddCheckbox(UIBuilder ui, String label, string path, SettingSync.LocalChange localChangeAction = SettingSync.LocalChange.UpdateSetting) {
+				Checkbox checkbox = ui.Checkbox(label.AsLocaleKey(null, true, null), false, true, 4f);
+				checkbox.State.SyncWithSetting(path, localChangeAction);
+			}
+
+			public static void AddCheckboxDrive(UIBuilder ui, String label, Sync<bool> driveSetting) {
+				Checkbox checkbox = ui.Checkbox(label.AsLocaleKey(null, true, null), false, true, 4f);
+				checkbox.State.DriveFrom(driveSetting, true, false, true);
+			}
+
+			public static void AddFloatTextEditorField(UIBuilder ui, string label, string path, float defaultValue, float minValue, float maxValue, int decimalPlaces = 0, string format = "F0", SettingSync.LocalChange localChangeAction = SettingSync.LocalChange.UpdateSetting) {
+				FloatTextEditorParser floatTextEditorParser = ui.HorizontalElementWithLabel<FloatTextEditorParser>(label.AsLocaleKey(null, true, null), 0.7f, () => ui.FloatField(minValue, maxValue, decimalPlaces, format, true), 0.01f);
+				floatTextEditorParser.ParsedValue.SyncWithSetting(path, localChangeAction);
+				floatTextEditorParser.ParsedValue.Value = defaultValue;
+			}
+
+			public static void AddIntTextEditorField(UIBuilder ui, string label, string path, int defaultValue, int minValue, int maxValue, int valueIncrement = 0) {
+				IntTextEditorParser intTextEditorParser = ui.HorizontalElementWithLabel<IntTextEditorParser>(label.AsLocaleKey(null, true, null), 0.7f, () => ui.IntegerField(minValue, maxValue, valueIncrement, true), 0.01f);
+				intTextEditorParser.ParsedValue.Value = defaultValue;
+				intTextEditorParser.ParsedValue.SyncWithLocalVariable(path);
+			}
+
+			public static void AddQuantityTextEditorField(UIBuilder ui, string label, string path) {
+				QuantityTextEditorParser<Distance> quantityTextEditorParser = ui.HorizontalElementWithLabel<QuantityTextEditorParser<Distance>>(label.AsLocaleKey(null, true, null), 0.7f, () => ui.QuantityField<Distance>(new Distance(0.0), new Distance(2.2), false), 0.01f);
+				quantityTextEditorParser.ParsedValue.SyncWithSetting(path, SettingSync.LocalChange.UpdateSetting);
+				_heightField.Target = quantityTextEditorParser;
+				quantityTextEditorParser.FormatNumber.Value = "F0";
+				quantityTextEditorParser.FormatUnit.Value = "cm";
+				quantityTextEditorParser.DefaultUnit.Value = "cm";
+				quantityTextEditorParser.IgnoreOutOfRange.Value = true;
+			}
+
+			public static void AddMasterAudioSlider(UIBuilder ui, string localeString, IField driveFromSource) {
+				Text text = ui.Text("", true, null, true, null);
+				Slider<float> slider = ui.Slider(ui.Style.MinHeight, 0f, 0f, 1f, false);
+				slider.Power.Value = 0.5f;
+				//System.MissingMethodException: FrooxEngine.LocaleStringDriver FrooxEngine.LocaleHelper.DriveLocalized(FrooxEngine.IField`1<string>,string,string,System.ValueTuple`2<string, object>[])
+				text.Content.DriveLocalized(localeString, "<b>{0}</b>", new ValueTuple<string, object>[] {
+					new ValueTuple<string, object>("n", slider.Value)
+				});
+				
+				slider.Value.DriveFrom(driveFromSource, true, false, true);
+				ApplySliderStyle(slider);
+			}
+
+			public static void AddSlider(UIBuilder ui, string path, float defaultValue, float min, float max) {
+				Slider<float> slider = ui.Slider(ui.Style.MinHeight, defaultValue, min, max, false);
+				slider.Value.SyncWithSetting(path, SettingSync.LocalChange.UpdateSetting);
+				ApplySliderStyle(slider);
+			}
+
+			public static void AddAudioSlider(UIBuilder ui, string localeString, AudioTypeGroup audioTypeGroup) {
+				Text text2 = ui.Text(localeString, true, null, true, null);
+				Slider<float> slider = ui.Slider(ui.Style.MinHeight, 0f, 0f, 1f, false);
+				slider.Power.Value = 0.5f;
+				AudioTypeGroupVolumeSlider audioTypeGroupVolumeSlider = ui.Current.AttachComponent<AudioTypeGroupVolumeSlider>(true, null);
+				audioTypeGroupVolumeSlider.Slider.Target = slider;
+				audioTypeGroupVolumeSlider.Group.Value = audioTypeGroup;
+				text2.Content.DriveLocalized(localeString, null, new ValueTuple<string, object>[] {
+					new ValueTuple<string, object>("n", slider.Value)
+				});
+				ApplySliderStyle(slider);
+			}
+
+			public static void ApplySliderStyle(Slider<float> slider) {
+				Slot bg = slider.Slot[0];
+				Slot handle = slider.Slot[1];
+				//Msg("Handle name slot: " + handle.Name);
+				ValueCopy<float2> vc=bg[0].AttachComponent<ValueCopy<float2>>(true, null);
+				vc.Source.Value = handle[0].GetComponent<RectTransform>().AnchorMax.ReferenceID;
+				vc.Target.Value = bg[0].GetComponent<RectTransform>().AnchorMax.ReferenceID;
+				Slot img = bg.AddSlot("Image");
+				RectTransform rect = img.AttachComponent<RectTransform>();
+				rect.AnchorMin.Value = new float2(0, 0.5f);
+				rect.AnchorMax.Value = new float2(1, 0.5f);
+				rect.OffsetMin.Value = new float2(0, -5.5f);
+				rect.OffsetMax.Value = new float2(0, 5.5f);
+				Image img2 = img.AttachComponent<Image>();
+				img2.Tint.Value = new color(1,1,1,0.2f);
+			}
+
+			public static SlideSwapRegion.Slide SlideVec(Tabs tab) {
+				int num = tab.CompareTo(ActiveTab);
+				if (num < 0) {
+					return SlideSwapRegion.Slide.Right;
+				} else if (num > 0) {
+					return SlideSwapRegion.Slide.Left;
+				} else {
+					return SlideSwapRegion.Slide.None;
+				}
+			}
+
+
+			[SyncMethod]
+			private static void OnChangeLanguage(IButton button, ButtonEventData eventData) {
+				settingsDialog.Slot.OpenModalOverlay(new float2(0.7f, 0.7f), false).Slot.AttachComponent<LanguageSelection>(true, null);
+			}
+			[SyncMethod]
+			private static void OnSelectAudioInputDevice(IButton button, ButtonEventData eventData) {
+				settingsDialog.Slot.OpenModalOverlay(new float2(0.7f, 0.7f), false).Slot.AttachComponent<AudioInputDeviceSelection>(true, null).SetupAsSettingSelection();
+			}
+			[SyncMethod]
+			private static void OnSelectAudioOutputDevice(IButton button, ButtonEventData eventData) {
+				settingsDialog.Slot.OpenModalOverlay(new float2(0.4f, 0.7f), false).Slot.AttachComponent<AudioOutputDeviceSelection>(true, null).SetupAsSettingSelection();
+			}
+
+			[SyncMethod]
+			private static void OnSaveSettings(IButton button, ButtonEventData eventData) {
+				_OnSaveMethod.Invoke(settingsDialog, new object[] {button, eventData});
+			}
+
+			[SyncMethod]
+			private static void OnResetTutorials(IButton button, ButtonEventData eventData) {
+				Settings.ClearSettings(TutorialManager.TUTORIALS_ROOT);
+			}
+
+			[SyncMethod]
+			private static void OnResetLaserSettings(IButton button, ButtonEventData eventData) {
+				Settings.WriteValue<float>("Input.Laser.SmoothSpeed", 5f);
+				Settings.WriteValue<float>("Input.Laser.SmoothModulateStartAngle", 2f);
+				Settings.WriteValue<float>("Input.Laser.SmoothModulateEndAngle", 45f);
+				Settings.WriteValue<float>("Input.Laser.SmoothModulateExp", 0.75f);
+				Settings.WriteValue<float>("Input.Laser.SmoothModulateMultiplier", 8f);
+				Settings.WriteValue<float>("Input.Laser.StickThreshold", 0.2f);
+			}
+		}
+	}
+}
\ No newline at end of file
diff --git a/SettingsRedux.csproj b/SettingsRedux.csproj
new file mode 100644
index 0000000..82a757e
--- /dev/null
+++ b/SettingsRedux.csproj
@@ -0,0 +1,84 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="15.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props" Condition="Exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props')" />
+  <PropertyGroup>
+    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
+    <OutputType>Library</OutputType>
+    <AppDesignerFolder>Properties</AppDesignerFolder>
+    <RootNamespace>SettingsRedux</RootNamespace>
+    <AssemblyName>SettingsRedux</AssemblyName>
+    <TargetFrameworkVersion>v4.6.2</TargetFrameworkVersion>
+    <FileAlignment>512</FileAlignment>
+    <Deterministic>true</Deterministic>
+    <TargetFrameworkProfile />
+    <ProjectGuid>{597A16AF-AC61-46FA-8F21-1AD4F1A2D857}</ProjectGuid>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
+    <DebugSymbols>true</DebugSymbols>
+    <DebugType>full</DebugType>
+    <Optimize>false</Optimize>
+    <OutputPath>bin\Debug\</OutputPath>
+    <DefineConstants>DEBUG;TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
+    <DebugType>pdbonly</DebugType>
+    <Optimize>true</Optimize>
+    <OutputPath>bin\Release\</OutputPath>
+    <DefineConstants>TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+  </PropertyGroup>
+  <ItemGroup>
+    <Reference Include="0Harmony">
+      <HintPath>R:\SteamLibrary\steamapps\common\NeosVR\0Harmony.dll</HintPath>
+      <Private>False</Private>
+    </Reference>
+    <Reference Include="BaseX">
+      <HintPath>R:\SteamLibrary\steamapps\common\NeosVRBetaBuilds\NeosStandalone\app\Neos_Data\Managed\BaseX.dll</HintPath>
+      <Private>False</Private>
+    </Reference>
+    <Reference Include="CodeX">
+      <HintPath>R:\SteamLibrary\steamapps\common\NeosVRBetaBuilds\NeosStandalone\app\Neos_Data\Managed\CodeX.dll</HintPath>
+      <Private>False</Private>
+    </Reference>
+    <Reference Include="FrooxEngine">
+      <HintPath>R:\SteamLibrary\steamapps\common\NeosVRBetaBuilds\NeosStandalone\app\Neos_Data\Managed\FrooxEngine.dll</HintPath>
+      <Private>False</Private>
+    </Reference>
+    <Reference Include="NeosModLoader">
+      <HintPath>R:\SteamLibrary\steamapps\common\NeosVR\Libraries\NeosModLoader.dll</HintPath>
+      <Private>False</Private>
+    </Reference>
+    <Reference Include="QuantityX">
+      <HintPath>R:\SteamLibrary\steamapps\common\NeosVRBetaBuilds\NeosStandalone\app\Neos_Data\Managed\QuantityX.dll</HintPath>
+      <Private>False</Private>
+    </Reference>
+    <Reference Include="System" />
+    <Reference Include="System.ValueTuple, Version=4.0.3.0, Culture=neutral, PublicKeyToken=cc7b13ffcd2ddd51, processorArchitecture=MSIL">
+      <HintPath>packages\System.ValueTuple.4.5.0\lib\net461\System.ValueTuple.dll</HintPath>
+      <Private>False</Private>
+    </Reference>
+  </ItemGroup>
+  <ItemGroup>
+    <Compile Include="SettingsRedux.cs" />
+    <Compile Include="Properties\AssemblyInfo.cs" />
+  </ItemGroup>
+  <ItemGroup>
+    <None Include="packages.config" />
+    <None Include="README.md" />
+  </ItemGroup>
+  <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
+  <PropertyGroup>
+    <PostBuildEvent>
+    </PostBuildEvent>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'Debug|AnyCPU'">
+    <StartAction>Program</StartAction>
+    <StartProgram>C:\Program Files %28x86%29\Steam\steamapps\common\NeosVR\Neos.exe</StartProgram>
+    <StartArguments>-LoadAssembly "C:\Program Files %28x86%29\Steam\steamapps\common\NeosVR\Libraries\NeosModLoader.dll" -Config "C:\Program Files %28x86%29\Steam\steamapps\common\NeosVR\Config.json"</StartArguments>
+    <StartWorkingDirectory>C:\Program Files %28x86%29\Steam\steamapps\common\NeosVR\</StartWorkingDirectory>
+  </PropertyGroup>
+</Project>
\ No newline at end of file
diff --git a/SettingsRedux.sln b/SettingsRedux.sln
new file mode 100644
index 0000000..0ba8764
--- /dev/null
+++ b/SettingsRedux.sln
@@ -0,0 +1,25 @@
+
+Microsoft Visual Studio Solution File, Format Version 12.00
+# Visual Studio Version 16
+VisualStudioVersion = 16.0.32228.343
+MinimumVisualStudioVersion = 10.0.40219.1
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "SettingsRedux", "SettingsRedux.csproj", "{597A16AF-AC61-46FA-8F21-1AD4F1A2D857}"
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Debug|Any CPU = Debug|Any CPU
+		Release|Any CPU = Release|Any CPU
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{597A16AF-AC61-46FA-8F21-1AD4F1A2D857}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{597A16AF-AC61-46FA-8F21-1AD4F1A2D857}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{597A16AF-AC61-46FA-8F21-1AD4F1A2D857}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{597A16AF-AC61-46FA-8F21-1AD4F1A2D857}.Release|Any CPU.Build.0 = Release|Any CPU
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+		SolutionGuid = {478FC002-B029-4D94-B13A-E237CE2332AE}
+	EndGlobalSection
+EndGlobal
diff --git a/packages.config b/packages.config
new file mode 100644
index 0000000..2657a36
--- /dev/null
+++ b/packages.config
@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="utf-8"?>
+<packages>
+  <package id="System.ValueTuple" version="4.5.0" targetFramework="net462" />
+</packages>
\ No newline at end of file