diff --git a/README.md b/README.md
index 1106d86..082d6fc 100644
--- a/README.md
+++ b/README.md
@@ -9,10 +9,7 @@
 
 ### How-to-compile/upload
 ```bash
-arduino-cli compile -b arduino:samd:nano_33_iot -v examples/LAN8651-iperf
-arduino-cli upload -b arduino:samd:nano_33_iot -v examples/LAN8651-iperf -p /dev/ttyACM0
-# or
-arduino-cli compile -b arduino:samd:nano_33_iot -v examples/LAN8651-iperf -u -p /dev/ttyACM0
+arduino-cli compile -b arduino:renesas_uno:unor4wifi -v examples/iperf-client -u -p /dev/ttyACM0
 ```
 
 ### How-to-[`EVB-LAN8670-USB`](https://www.microchip.com/en-us/development-tool/EV08L38A)
diff --git a/examples/LAN8651-iperf/README.md b/examples/iperf-client/README.md
similarity index 76%
rename from examples/LAN8651-iperf/README.md
rename to examples/iperf-client/README.md
index 9fe95b5..cde80d7 100644
--- a/examples/LAN8651-iperf/README.md
+++ b/examples/iperf-client/README.md
@@ -1,14 +1,11 @@
-:floppy_disk: `LAN8651-iperf`
+:floppy_disk: `iperf-client`
 =============================
 
 This example sketch can be used to measure 10BASE-T1S network performance using this software stack. The required hardware is a Arduino [Nano 33 IoT](https://store.arduino.cc/products/arduino-nano-33-iot) and a Mikroe [2-Wire ETH](https://www.mikroe.com/two-wire-eth-click) click board. 
 
 ### How-to-compile/upload
 ```bash
-arduino-cli compile -b arduino:samd:nano_33_iot -v examples/LAN8651-iperf
-arduino-cli upload -b arduino:samd:nano_33_iot -v examples/LAN8651-iperf -p /dev/ttyACM0
-# or
-arduino-cli compile -b arduino:samd:nano_33_iot -v examples/LAN8651-iperf -u -p /dev/ttyACM0
+arduino-cli compile -b arduino:renesas_uno:unor4wifi -v examples/iperf-client -u -p /dev/ttyACM0
 ```
 
 ### How-to-`iperf`
@@ -35,5 +32,5 @@ PING 192.168.42.101 (192.168.42.101) 56(84) bytes of data.
 ```
 Start `iperf` on your PC:
 ```bash
-iperf -c 192.168.42.101 -u -b 10M
+iperf --client 192.168.42.101 --udp --bandwidth 10M
 ```
diff --git a/examples/LAN8651-iperf/LAN8651-iperf.ino b/examples/iperf-client/iperf-client.ino
similarity index 79%
rename from examples/LAN8651-iperf/LAN8651-iperf.ino
rename to examples/iperf-client/iperf-client.ino
index d610ad7..f39e7d3 100644
--- a/examples/LAN8651-iperf/LAN8651-iperf.ino
+++ b/examples/iperf-client/iperf-client.ino
@@ -87,15 +87,7 @@ void setup()
     for (;;) { }
   }
 
-  /* Obtain MAC address stored on EEPROM of Mikroe
-   * Two-Wire ETH Click board.
-   */
-  MacAddress mac_addr;
-  if (!get_mac_address(mac_addr.data()))
-  {
-    Serial.println("'get_mac_address(...)' failed, using fallback MAC address.");
-    memcpy(mac_addr.data(), TC6::TC6_Io::FALLBACK_MAC, MAC_ADDRESS_NUM_BYTES);
-  }
+  MacAddress const mac_addr = MacAddress::create_from_uid();
 
   if (!tc6_inst->begin(  ip_addr
                        , network_mask
@@ -156,30 +148,3 @@ static void OnPlcaStatus(bool success, bool plcaStatus)
     tc6_inst->enablePlca();
   }
 }
-
-static bool get_mac_address(uint8_t * p_mac)
-{
-  static uint8_t const MAC_EEPROM_I2C_SLAVE_ADDR = 0x58;
-  static uint8_t const MAC_EEPROM_EUI_REG_ADDR = 0x9A;
-  static uint8_t const MAC_EEPROM_MAC_SIZE = 6;
-  bool success = false;
-
-  Wire.beginTransmission(MAC_EEPROM_I2C_SLAVE_ADDR);
-  Wire.write(MAC_EEPROM_EUI_REG_ADDR);
-  Wire.endTransmission();
-
-  Wire.requestFrom(MAC_EEPROM_I2C_SLAVE_ADDR, MAC_EEPROM_MAC_SIZE);
-
-  uint32_t const start = millis();
-
-  size_t bytes_read = 0;
-  while (bytes_read < MAC_EEPROM_MAC_SIZE && ((millis() - start) < 1000)) {
-    if (Wire.available()) {
-      p_mac[bytes_read] = Wire.read();
-      bytes_read++;
-    }
-  }
-
-  success = (bytes_read == MAC_EEPROM_MAC_SIZE);
-  return success;
-}
diff --git a/examples/LAN8651-iperf/udp_perf_client.cpp b/examples/iperf-client/udp_perf_client.cpp
similarity index 100%
rename from examples/LAN8651-iperf/udp_perf_client.cpp
rename to examples/iperf-client/udp_perf_client.cpp
diff --git a/examples/LAN8651-iperf/udp_perf_client.h b/examples/iperf-client/udp_perf_client.h
similarity index 98%
rename from examples/LAN8651-iperf/udp_perf_client.h
rename to examples/iperf-client/udp_perf_client.h
index ac770d5..08650a0 100644
--- a/examples/LAN8651-iperf/udp_perf_client.h
+++ b/examples/iperf-client/udp_perf_client.h
@@ -92,7 +92,7 @@ struct perf_stats {
 #define UDP_TIME_INTERVAL 300
 
 /* Server to connect with */
-#define UDP_SERVER_IP_ADDRESS "192.168.0.5"
+#define UDP_SERVER_IP_ADDRESS "192.168.42.100"
 
 /* UDP buffer length in bytes */
 #define UDP_SEND_BUFSIZE 1460
diff --git a/src/microchip/TC6_Arduino_10BASE_T1S.cpp b/src/microchip/TC6_Arduino_10BASE_T1S.cpp
index 2c48185..208040a 100644
--- a/src/microchip/TC6_Arduino_10BASE_T1S.cpp
+++ b/src/microchip/TC6_Arduino_10BASE_T1S.cpp
@@ -398,58 +398,33 @@ void TC6_CB_OnRxEthernetSlice(TC6_t *pInst, const uint8_t *pRx, uint16_t offset,
 {
   TC6LwIP_t *lw = TC6::GetContextTC6(pInst);
   bool success = true;
-  (void) pInst;
-  (void) pGlobalTag;
+  (void)pInst;
+  (void)pGlobalTag;
 //  TC6_ASSERT(lw->tc.tc6 == pInst);
-  if (lw->tc.rxInvalid)
-  {
+  if (lw->tc.rxInvalid) {
     success = false;
   }
-  if (success && ((offset + len) > TC6LwIP_MTU))
-  {
-//        PrintRateLimited("on_rx_slice:packet greater than MTU", (offset + len));
+  if (success && ((offset + len) > TC6LwIP_MTU)) {
+//    PRINT("on_rx_slice:packet greater than MTU", (offset + len));
     lw->tc.rxInvalid = true;
     success = false;
   }
-  if (success && (0u != offset))
-  {
-    if (!lw->tc.pbuf || !lw->tc.rxLen)
-    {
-//      TC6_ASSERT(false);
-      lw->tc.rxInvalid = true;
-      success = false;
-    }
-  } else
-  {
-    if (success && (lw->tc.pbuf || lw->tc.rxLen))
-    {
-//      TC6_ASSERT(false);
+  if (success && (NULL == lw->tc.pbuf)) {
+    lw->tc.pbuf = pbuf_alloc(PBUF_RAW, TC6LwIP_MTU, PBUF_RAM);
+    if (!lw->tc.pbuf) {
       lw->tc.rxInvalid = true;
       success = false;
     }
-
-    if (success)
-    {
-      lw->tc.pbuf = pbuf_alloc(PBUF_RAW, TC6LwIP_MTU, PBUF_RAM);
-      if (!lw->tc.pbuf)
-      {
-        lw->tc.rxInvalid = true;
-        success = false;
-      }
-    }
-    if (success && (NULL != lw->tc.pbuf->next))
-    {
-//      TC6_ASSERT(lw->tc.pbuf->ref != 0);
-//            PrintRateLimited("rx_slice: could not allocate unsegmented memory diff", (lw->tc.pbuf->tot_len - lw->tc.pbuf->len));
+    if (success && (NULL != lw->tc.pbuf->next)) {
+//      PRINT("rx_slice: could not allocate unsegmented memory diff", (lw->tc.pbuf->tot_len - lw->tc.pbuf->len));
       lw->tc.rxInvalid = true;
       pbuf_free(lw->tc.pbuf);
       lw->tc.pbuf = NULL;
       success = false;
     }
   }
-  if (success)
-  {
-    (void) memcpy((uint8_t *) lw->tc.pbuf->payload + offset, pRx, len);
+  if (success) {
+    (void)memcpy(lw->tc.pbuf->payload + offset, pRx, len);
     lw->tc.rxLen += len;
   }
 }
diff --git a/src/microchip/lib/libtc6/inc/tc6-regs.h b/src/microchip/lib/libtc6/inc/tc6-regs.h
index b0d117c..e0d078c 100644
--- a/src/microchip/lib/libtc6/inc/tc6-regs.h
+++ b/src/microchip/lib/libtc6/inc/tc6-regs.h
@@ -148,6 +148,12 @@ void TC6Regs_Reinit(TC6_t *pInst);
  */
 bool TC6Regs_SetPlca(TC6_t *pInst, bool plcaEnable, uint8_t nodeId, uint8_t nodeCount);
 
+/** \brief Returns the LAN865x Revision number.
+ *  \param pInst - The pointer returned by TC6_Init.
+ *  \return 0, in case of error. Otherwise, Chip Revision.
+ */
+uint8_t TC6Regs_GetChipRevision(TC6_t *pInst);
+
 /** \brief Configure DIOAx GPIOs as output.
  */
 void TC6Regs_EnableDio_A0(TC6_t *pTC6);
@@ -191,7 +197,7 @@ uint32_t TC6Regs_CB_GetTicksMs(void);
 void TC6Regs_CB_OnEvent(TC6_t *pInst, TC6Regs_Event_t event, void *pTag);
 
 /*>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>*/
-/*                        CONVERSTION FUNCTIONS                         */
+/*                        CONVERSION  FUNCTIONS                         */
 /*>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>*/
 
 template <typename Enumeration>