diff --git a/README.md b/README.md
index 1106d86..082d6fc 100644
--- a/README.md
+++ b/README.md
@@ -9,10 +9,7 @@
 
 ### How-to-compile/upload
 ```bash
-arduino-cli compile -b arduino:samd:nano_33_iot -v examples/LAN8651-iperf
-arduino-cli upload -b arduino:samd:nano_33_iot -v examples/LAN8651-iperf -p /dev/ttyACM0
-# or
-arduino-cli compile -b arduino:samd:nano_33_iot -v examples/LAN8651-iperf -u -p /dev/ttyACM0
+arduino-cli compile -b arduino:renesas_uno:unor4wifi -v examples/iperf-client -u -p /dev/ttyACM0
 ```
 
 ### How-to-[`EVB-LAN8670-USB`](https://www.microchip.com/en-us/development-tool/EV08L38A)
diff --git a/examples/LAN8651-iperf/README.md b/examples/iperf-client/README.md
similarity index 79%
rename from examples/LAN8651-iperf/README.md
rename to examples/iperf-client/README.md
index c0d634b..cde80d7 100644
--- a/examples/LAN8651-iperf/README.md
+++ b/examples/iperf-client/README.md
@@ -1,14 +1,11 @@
-:floppy_disk: `LAN8651-iperf`
+:floppy_disk: `iperf-client`
 =============================
 
 This example sketch can be used to measure 10BASE-T1S network performance using this software stack. The required hardware is a Arduino [Nano 33 IoT](https://store.arduino.cc/products/arduino-nano-33-iot) and a Mikroe [2-Wire ETH](https://www.mikroe.com/two-wire-eth-click) click board. 
 
 ### How-to-compile/upload
 ```bash
-arduino-cli compile -b arduino:samd:nano_33_iot -v examples/LAN8651-iperf
-arduino-cli upload -b arduino:samd:nano_33_iot -v examples/LAN8651-iperf -p /dev/ttyACM0
-# or
-arduino-cli compile -b arduino:samd:nano_33_iot -v examples/LAN8651-iperf -u -p /dev/ttyACM0
+arduino-cli compile -b arduino:renesas_uno:unor4wifi -v examples/iperf-client -u -p /dev/ttyACM0
 ```
 
 ### How-to-`iperf`
diff --git a/examples/LAN8651-iperf/LAN8651-iperf.ino b/examples/iperf-client/iperf-client.ino
similarity index 100%
rename from examples/LAN8651-iperf/LAN8651-iperf.ino
rename to examples/iperf-client/iperf-client.ino
diff --git a/examples/LAN8651-iperf/udp_perf_client.cpp b/examples/iperf-client/udp_perf_client.cpp
similarity index 100%
rename from examples/LAN8651-iperf/udp_perf_client.cpp
rename to examples/iperf-client/udp_perf_client.cpp
diff --git a/examples/LAN8651-iperf/udp_perf_client.h b/examples/iperf-client/udp_perf_client.h
similarity index 98%
rename from examples/LAN8651-iperf/udp_perf_client.h
rename to examples/iperf-client/udp_perf_client.h
index ac770d5..08650a0 100644
--- a/examples/LAN8651-iperf/udp_perf_client.h
+++ b/examples/iperf-client/udp_perf_client.h
@@ -92,7 +92,7 @@ struct perf_stats {
 #define UDP_TIME_INTERVAL 300
 
 /* Server to connect with */
-#define UDP_SERVER_IP_ADDRESS "192.168.0.5"
+#define UDP_SERVER_IP_ADDRESS "192.168.42.100"
 
 /* UDP buffer length in bytes */
 #define UDP_SEND_BUFSIZE 1460