Download compiled binary

[Einstein2150]

Can someone give me a compiled download? I compiled mine with no errors, flashed it but there is only a white screen. I've downgraded the library like it is mentioned in the manual.

Flashing the stock firmware install without problems 🤷🏻‍♂️

[ArielBaravalle]

hello

you try to put this line in the first line os setup?
afio_cfg_debug_ports(AFIO_DEBUG_NONE);

`
// ------------------------
void setup() {
// ------------------------
afio_cfg_debug_ports(AFIO_DEBUG_NONE);
DBG_INIT(SERIAL_BAUD_RATE);
DBG_PRINT("Dual channel O Scope with two logic channels, ver: ");
DBG_PRINTLN(FIRMWARE_VERSION);

// set digital and analog stuff
initIO();

// load scope config or factory reset to defaults
loadConfig(digitalRead(BTN4) == LOW);

// init the IL9341 display
initDisplay();

}

`

[CM630]

The binaries are here:
https://github.com/ardyesp/DLO-138/tree/master/binaries
They are five years old, I have no idea if they are made with the latest sources.

[kittenarmy]

I tried flashing the precompiled binary too but it didn't work for me.

[CM630]

„it didn't work for me.“ is not too descriptive.
What happenned after you flashed the device?

[kittenarmy]

„it didn't work for me.“ is not too descriptive. What happenned after you flashed the device?

I just got white screen IRRC. From my digging I think my DSO-138 has a different LCD to the expected 9341. I'm waiting for ST Link to arrive to do some dev as I got tired of soldering jumpers for each compile.

[Einstein2150]

... I got tired of soldering jumpers for each compile.

I soldered 2 breadboard jumper wires on it and bridged them on the breadboard 😅

[kittenarmy]

... I got tired of soldering jumpers for each compile.

I soldered 2 breadboard jumper wires on it and bridged them on the breadboard 😅

Aha I just did the same. 😄 Seems like even basic things like getting the board LED to flash or TFT black screen needs that afio_cfg_debug_ports(AFIO_DEBUG_NONE); which renders SWD/STLink useless. Oh well. 😥

[CM630]

Did someone succeed to make a working BIN from the source?
The uploaded BIN works for me, but it needs some fixes.
And all the BINs that I have build do not work, and for some reason their size is greater.