diff --git a/tools/json/config.system.json b/tools/json/config.system.json
index a35b99ca0..c65a8bd1f 100644
--- a/tools/json/config.system.json
+++ b/tools/json/config.system.json
@@ -9,22 +9,22 @@
                     "description": "Enable Armbian firmware upgrades",
                     "about": "This will enable Armbian kernel upgrades that are currently put on hold.",
                     "command": [
-                        "armbian_fw_manipulate unhold"
+                        "module_armbianfirmware unhold"
                     ],
                     "status": "Stable",
                     "author": "@igorpecovnik",
-                    "condition": "[[ -n \"$(apt-mark showhold)\" ]]"
+                    "condition": "module_armbianfirmware hold status"
                 },
                 {
                     "id": "SY002",
                     "description": "Disable Armbian kernel upgrades",
                     "about": "Disable Armbian kernel/firmware upgrades",
                     "command": [
-                        "armbian_fw_manipulate hold"
+                        "module_armbianfirmware hold"
                     ],
                     "status": "Stable",
                     "author": "@igorpecovnik",
-                    "condition": "[[ -z \"$(apt-mark showhold)\" ]]"
+                    "condition": "! module_armbianfirmware hold status"
                 },
                 {
                     "id": "SY003",
@@ -230,25 +230,25 @@
                 },
                 {
                     "id": "SY010",
-                    "description": "Switch to rolling release",
+                    "description": "Switch to rolling packages repository",
                     "about": "This will switch OS to rolling releases.",
                     "command": [
-                        "set_rolling"
+                        "module_armbianfirmware repository rolling"
                     ],
                     "status": "Stable",
                     "author": "@igorpecovnik",
-                    "condition": "grep -q 'apt.armbian.com' /etc/apt/sources.list.d/armbian.list && [[ -z \"$(apt-mark showhold)\" ]]"
+                    "condition": "module_armbianfirmware repository stable status"
                 },
                 {
                     "id": "SY011",
-                    "description": "Switch to stable release",
+                    "description": "Switch to stable packages repository",
                     "about": "This will switch OS to stable releases",
                     "command": [
-                        "set_stable"
+                        "module_armbianfirmware repository stable"
                     ],
                     "status": "Stable",
                     "author": "@igorpecovnik",
-                    "condition": "grep -q 'beta.armbian.com' /etc/apt/sources.list.d/armbian.list && [[ -z \"$(apt-mark showhold)\" ]]"
+                    "condition": "module_armbianfirmware repository rolling status"
                 },
                 {
                     "id": "SY012",
@@ -287,7 +287,7 @@
                     "description": "Install alternative kernels",
                     "about": "Switching between kernels might change functionality of your device. \n\nIt might fail to boot!",
                     "command": [
-                        "switch_kernels"
+                        "module_armbianfirmware select"
                     ],
                     "status": "Stable",
                     "author": "@igorpecovnik",
diff --git a/tools/modules/system/armbian_fw_manipulate.sh b/tools/modules/system/armbian_fw_manipulate.sh
deleted file mode 100644
index 162a0aba1..000000000
--- a/tools/modules/system/armbian_fw_manipulate.sh
+++ /dev/null
@@ -1,84 +0,0 @@
-module_options+=(
-	["armbian_fw_manipulate,author"]="@igorpecovnik"
-	["armbian_fw_manipulate,ref_link"]=""
-	["armbian_fw_manipulate,feature"]="armbian_fw_manipulate"
-	["armbian_fw_manipulate,desc"]="freeze, unhold, reinstall armbian related packages."
-	["armbian_fw_manipulate,example"]="armbian_fw_manipulate unhold/freeze/reinstall"
-	["armbian_fw_manipulate,status"]="Active"
-)
-#
-# freeze/unhold/reinstall armbian firmware packages
-#
-armbian_fw_manipulate() {
-
-	local function=$1
-	local version=$2
-	local branch=$3
-
-	[[ -n $version ]] && local version="=${version}"
-
-	# fallback to $BRANCH
-	[[ -z "${branch}" ]] && branch="${BRANCH}"
-	[[ -z "${branch}" ]] && branch="current" # fallback in case we switch to very old BSP that have no such info
-
-	# packages to install
-	local armbian_packages=(
-		"linux-u-boot-${BOARD}-${branch}"
-		"linux-image-${branch}-${LINUXFAMILY}"
-		"linux-dtb-${branch}-${LINUXFAMILY}"
-		"armbian-zsh"
-		"armbian-bsp-cli-${BOARD}-${branch}"
-	)
-
-	# reinstall headers only if they were previously installed
-	if dpkg -l | grep -E "linux-headers" >/dev/null; then
-		local armbian_packages+=("linux-headers-${branch}-${LINUXFAMILY}")
-	fi
-
-	local packages=""
-	for pkg in "${armbian_packages[@]}"; do
-		if [[ "${function}" == reinstall ]]; then
-			local pkg_search=$(apt search "$pkg" 2> /dev/null | grep "^$pkg")
-			if [[ $? -eq 0 && -n "${pkg_search}" ]]; then
-				if [[ "${pkg_search}" == *$version* ]] ; then
-				packages+="$pkg${version} ";
-				else
-				packages+="$pkg ";
-				fi
-			fi
-		else
-			if check_if_installed $pkg; then
-				packages+="$pkg${version} "
-			fi
-		fi
-	done
-	for pkg in "${packages[@]}"; do
-		case $function in
-			unhold) apt-mark unhold ${pkg} | show_infobox ;;
-			hold) apt-mark hold ${pkg} | show_infobox ;;
-			reinstall)
-				apt_install_wrapper apt-get -y --simulate --download-only --allow-change-held-packages --allow-downgrades install ${pkg}
-				if [[ $? == 0 ]]; then
-					apt_install_wrapper apt-get -y purge "linux-u-boot-*" "linux-image-*" "linux-dtb-*" "linux-headers-*" "armbian-zsh-*" "armbian-bsp-cli-*" # remove all branches
-					apt_install_wrapper apt-get -y --allow-change-held-packages install ${pkg}
-					apt_install_wrapper apt-get -y autoremove
-					apt_install_wrapper apt-get -y clean
-				else
-					exit 1
-				fi
-
-
-				;;
-			*) return ;;
-		esac
-	done
-
-	# update branch information
-	BRANCH=$(dpkg -l | grep -E "linux-image" | grep -E "current|legacy|edge" | awk '{print $2}' | cut -d"-" -f3 | head -1)
-	if grep -q BRANCH /etc/armbian-release; then
-		[[ -n ${BRANCH} ]] && sed -i "s/BRANCH=.*/BRANCH=$BRANCH/g" /etc/armbian-release
-	else
-		[[ -n ${BRANCH} ]] && echo "BRANCH=$BRANCH" >> /etc/armbian-release
-	fi
-}
-
diff --git a/tools/modules/system/module_armbian_firmware.sh b/tools/modules/system/module_armbian_firmware.sh
new file mode 100644
index 000000000..21e682988
--- /dev/null
+++ b/tools/modules/system/module_armbian_firmware.sh
@@ -0,0 +1,239 @@
+declare -A module_options
+module_options+=(
+	["module_armbianfirmware,author"]="@igorpecovnik"
+	["module_armbianfirmware,feature"]="module_armbianfirmware"
+	["module_armbianfirmware,example"]="select install show hold unhold repository help"
+	["module_armbianfirmware,desc"]="Example module unattended interface."
+	["module_armbianfirmware,status"]="review"
+)
+
+function module_armbianfirmware() {
+	local title="Armbian firmware"
+	local condition=$(which "$title" 2>/dev/null)
+
+	# Convert the example string to an array
+	local commands
+	IFS=' ' read -r -a commands <<< "${module_options["module_armbianfirmware,example"]}"
+
+	case "$1" in
+		"${commands[0]}") # choose kernel from the list
+
+			# make sure to proceed if this variable is not defined. This can surface on some old builds
+			[[ -z "${KERNEL_TEST_TARGET}" ]] && KERNEL_TEST_TARGET="legacy,vendor,current,edge"
+			
+			# by default we define which kernels are suitable
+			if ! $DIALOG --title "Advanced options" --yesno "Show only mainstream kernels on the list?" 7 60; then
+				KERNEL_TEST_TARGET="legacy,vendor,current,edge"
+			fi
+
+			# read what is possible to install
+			local kernel_test_target=$(for kernel_test_target in ${KERNEL_TEST_TARGET//,/ }; do echo "linux-image-${kernel_test_target}-${LINUXFAMILY}"; done;)
+			local installed_kernel_version=$(dpkg -l | grep '^ii' | grep linux-image | awk '{print $2"="$3}')
+
+			# workaroun in case current is not installed
+			[[ -n ${installed_kernel_version} ]] && local grep_current_kernel=" | grep -v ${installed_kernel_version}"
+			
+			# main search command
+			local search_exec="apt-cache show ${kernel_test_target} \
+			| grep -E \"Package:|Version:|version:|family\" \
+			| grep -v \"Config-Version\" \
+			| sed -n -e 's/^.*: //p' \
+			| sed 's/\.$//g' \
+			| xargs -n3 -d'\n' \
+			| sed \"s/ /=/\" $grep_current_kernel"
+
+			# construct a list of kernels with their Armbian release versions and kernel version
+			IFS=$'\n'
+			local LIST=()
+			for line in $(eval ${search_exec}); do
+				LIST+=($(echo $line | awk -F ' ' '{print $1 "      "}') $(echo $line | awk -F ' ' '{print "v"$2}'))
+			done
+			unset IFS
+
+			# generate selection menu
+			local list_length=$((${#LIST[@]} / 2))
+			if [ "$list_length" -eq 0 ]; then
+				$DIALOG --backtitle "$BACKTITLE" --title " Warning " --msgbox "No other kernels available!" 7 31
+			else
+				if target_version=$(\
+						$DIALOG \
+						--separate-output \
+						--title "Select kernel" \
+						--menu "" \
+						$((${list_length} + 7)) 80 $((${list_length})) "${LIST[@]}" \
+						3>&1 1>&2 2>&3)
+				then
+					# extract branch
+					local branch=${target_version##*image-}
+					# call install function
+					${module_options["module_armbianfirmware,feature"]} ${commands[1]} "${branch%%-*}" "${target_version/*=/}"
+				fi
+			fi
+
+		;;
+
+		"${commands[1]}") # purge old and install selected kernel from desired branch and version
+		
+			# input parameters
+			local branch=$2
+			local version=$3
+
+			# generate list
+			${module_options["module_armbianfirmware,feature"]} ${commands[2]} "${branch}" "${version}" "hide"
+		
+			# purge and install
+			for pkg in "${packages[@]}"; do
+				purge_pkg=$(echo $pkg | sed -e 's/current/*/;s/legacy/*/;s/edge/*/;s/vendor/*/')
+				apt_install_wrapper apt-get -y --simulate --download-only --allow-change-held-packages --allow-downgrades install ${pkg}
+				# if test install is succesfull, proceed
+				if [[ $? == 0 ]]; then
+					apt_install_wrapper	apt-get -y purge ${purge_pkg}
+					apt_install_wrapper apt-get -y --autoremove --allow-change-held-packages install ${pkg}					
+				fi
+			done
+			
+		;;
+		"${commands[2]}") # generate a list of possible packages to install
+
+			# input parameters
+			local branch="$2"
+			local version="$3"
+			local hide="$4"
+			local repository="$5"
+
+			# if branch is not defined, we use the one that is currently installed
+			[[ -z $branch ]] && local branch=$BRANCH
+			
+			# if repository is not defined, we use stable one
+			[[ -z $repository ]] && local repository="apt.armbian.com"
+
+			# select Armbian packages we want to searching for
+			armbian_packages=(
+				"linux-image-${branch}-${LINUXFAMILY}"
+				"linux-dtb-${branch}-${LINUXFAMILY}"
+			)
+
+			# install headers only if they were previously installed
+			if dpkg -l | grep -E "linux-headers" >/dev/null; then
+				armbian_packages+=("linux-headers-${branch}-${LINUXFAMILY}")
+			fi
+
+			# install full firmware if it was installed previously
+			if dpkg -l | grep -E "armbian-firmware-full" >/dev/null; then
+				armbian_packages+=("armbian-firmware-full")
+				else
+				armbian_packages+=("armbian-firmware")
+			fi
+
+			# when we select a specific version of Armbian, we need to make sure that version exists
+			# for each package we want to install. In case desired version does not exists, it installs
+			# package without specifying version. This prevent breaking install in case some 
+			# package version was removed from repository. Just in case.
+			packages=""
+			for pkg in "${armbian_packages[@]}"; do
+				# use package + version if found else use package if found
+				if apt-cache show "$pkg" 2> /dev/null \
+					| grep -E "Package:|^Version:|family" \
+					| sed -n -e 's/^.*: //p' \
+					| sed 's/\.$//g' \
+					| xargs -n2 -d'\n' \
+					| grep ${pkg} | grep -e ${version} >/dev/null 2>&1; then
+					packages+="${pkg}=${version} ";
+				elif
+					apt-cache show "$pkg" 2> /dev/null \
+					| grep -E "Package:|^Version:|family" \
+					| sed -n -e 's/^.*: //p' \
+					| sed 's/\.$//g' \
+					| xargs -n2 -d'\n' \
+					| grep "${pkg}" >/dev/null 2>&1 ; then
+					packages+="${pkg} ";
+				fi
+			done
+			
+			# if this is called with a parameter hide, we only prepare this list but don't show its content
+			[[ "$4" != "hide" ]] && echo ${packages[@]}
+
+		;;
+		"${commands[3]}")
+
+			local status=$2
+
+			# apt-mark hold			
+			${module_options["module_armbianfirmware,feature"]} ${commands[2]} "" "" hide
+			if [[ "$status" == "status" ]]; then
+			hold=($(apt-mark showhold))
+			test=($(for lol in ${packages[@]}; do
+				for x in ${hold[@]}; do
+				echo $lol | grep $x
+				done
+			done))
+			[[ -z ${test[@]} ]] && return 1 || return 0
+			else
+				apt-mark hold ${packages[@]}
+			fi
+		
+		;;
+		"${commands[4]}")
+		
+			# apt-mark unhold
+			${module_options["module_armbianfirmware,feature"]} ${commands[2]} "" "" hide
+			apt-mark unhold ${packages[@]}
+		;;
+		"${commands[5]}")
+
+			# Parameter $2 = rolling | stable
+			# Parameter $3 = status which returns true or false
+			#
+			# It switches to rolling or stable Armbian repository and performs list update if this is needed
+
+			local repository=$2
+			local status=$3
+
+			if grep -q 'apt.armbian.com' /etc/apt/sources.list.d/armbian.list; then
+				if [[ "$repository" == "rolling" && "$status" == "status" ]]; then
+				return 1
+				elif [[ "$status" == "status" ]]; then
+				return 0
+				fi
+				if [[ "$repository" == "rolling" ]]; then					
+					sed -i "s/http:\/\/[^ ]*/http:\/\/beta.armbian.com/" /etc/apt/sources.list.d/armbian.list
+					apt_install_wrapper	apt-get update
+				fi
+			else
+				if [[ "$repository" == "stable" && "$status" == "status" ]]; then
+				return 1
+				elif [[ "$status" == "status" ]]; then
+				return 0
+				fi
+				if [[ "$repository" == "stable" ]]; then
+					sed -i "s/http:\/\/[^ ]*/http:\/\/apt.armbian.com/" /etc/apt/sources.list.d/armbian.list
+					apt_install_wrapper	apt-get update
+				fi
+			fi
+			
+			# reinstall firmware
+			[[ "$status" != "status" ]] && ${module_options["module_armbianfirmware,feature"]} ${commands[1]}
+		;;
+
+		"${commands[6]}")
+			echo -e "\nUsage: ${module_options["module_armbianfirmware,feature"]} <command> <switches>"
+			echo -e "Commands:  ${module_options["module_armbianfirmware,example"]}"
+			echo "Available commands:"
+			echo -e "\tselect    \t- [stable]|[rolling] TUI to select $title."
+			echo -e "\tinstall   \t- Install $title [\$BRANCH] [\$VERSION]."
+			echo -e "\tshow      \t- Show $title packages."
+			echo -e "\thold      \t- [status] Mark $title packages as held back. When parameter status is used, it returns false or true."
+			echo -e "\tunhold    \t- Unset $title packages set as held back."
+			echo -e "\trepository\t- [stable]|[rolling] selects repository and performs update."
+			echo
+		;;
+		*)
+		${module_options["module_armbianfirmware,feature"]} ${commands[6]}
+		;;
+	esac
+	}
+
+# uncomment to test the module
+DIALOG=whiptail
+source /etc/armbian-release
+module_armbianfirmware "$1" "$2" "$3" "$4"
diff --git a/tools/modules/system/set_rolling.sh b/tools/modules/system/set_rolling.sh
deleted file mode 100644
index fe2aad4d1..000000000
--- a/tools/modules/system/set_rolling.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-module_options+=(
-	["set_rolling,author"]="@Tearran"
-	["set_rolling,ref_link"]="https://github.com/armbian/config/blob/master/debian-config-jobs#L1446"
-	["set_rolling,feature"]="set_rolling"
-	["set_rolling,desc"]="Set Armbian to rolling release"
-	["set_rolling,example"]="set_rolling"
-	["set_rolling,status"]="Active"
-)
-#
-# @description Set Armbian to rolling release
-#
-function set_rolling() {
-
-	if ! grep -q 'beta.armbian.com' /etc/apt/sources.list.d/armbian.list; then
-		sed -i "s/http:\/\/[^ ]*/http:\/\/beta.armbian.com/" /etc/apt/sources.list.d/armbian.list
-		apt_install_wrapper apt-get update
-		armbian_fw_manipulate "reinstall"
-	fi
-}
-
diff --git a/tools/modules/system/set_stable.sh b/tools/modules/system/set_stable.sh
deleted file mode 100644
index 7cb467fbb..000000000
--- a/tools/modules/system/set_stable.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-module_options+=(
-	["set_stable,author"]="@Tearran"
-	["set_stable,ref_link"]="https://github.com/armbian/config/blob/master/debian-config-jobs#L1446"
-	["set_stable,feature"]="set_stable"
-	["set_stable,desc"]="Set Armbian to stable release"
-	["set_stable,example"]="set_stable"
-	["set_stable,status"]="Active"
-)
-#
-# @description Set Armbian to stable release
-#
-function set_stable() {
-
-	if ! grep -q 'apt.armbian.com' /etc/apt/sources.list.d/armbian.list; then
-		sed -i "s/http:\/\/[^ ]*/http:\/\/apt.armbian.com/" /etc/apt/sources.list.d/armbian.list
-		apt_install_wrapper apt-get update
-		armbian_fw_manipulate "reinstall"
-	fi
-}
-
diff --git a/tools/modules/system/switch_kernels.sh b/tools/modules/system/switch_kernels.sh
deleted file mode 100644
index d183dc848..000000000
--- a/tools/modules/system/switch_kernels.sh
+++ /dev/null
@@ -1,41 +0,0 @@
-module_options+=(
-	["switch_kernels,author"]="@igorpecovnik"
-	["switch_kernels,ref_link"]=""
-	["switch_kernels,feature"]="switch_kernels"
-	["switch_kernels,desc"]="Switching to alternative kernels"
-	["switch_kernels,example"]="switch_kernels"
-	["switch_kernels,status"]="Active"
-)
-#
-# @description Switch between alternative kernels
-#
-function switch_kernels() {
-
-	# we only allow switching kerneles that are in the test pool
-	[[ -z "${KERNEL_TEST_TARGET}" ]] && KERNEL_TEST_TARGET="legacy,current,edge"
-	dialog --title "Warning!" --yesno "\nInclude untested kernels on the list?" 7 60
-	[[ $? -eq 0 ]] && KERNEL_TEST_TARGET="legacy,vendor,current,edge"
-	local kernel_test_target=$(for x in ${KERNEL_TEST_TARGET//,/ }; do echo "linux-image-$x-${LINUXFAMILY}"; done;)
-	local installed_kernel_version=$(dpkg -l | grep '^ii' | grep linux-image | awk '{print $2"="$3}')
-	# just in case current is not installed
-	[[ -n ${installed_kernel_version} ]] && local grep_current_kernel=" | grep -v ${installed_kernel_version}"
-	local search_exec="apt-cache show ${kernel_test_target} | grep -E \"Package:|Version:|version:|family\" | grep -v \"Config-Version\" | sed -n -e 's/^.*: //p' | sed 's/\.$//g' | xargs -n3 -d'\n' | sed \"s/ /=/\" $grep_current_kernel"
-	IFS=$'
-'
-	local LIST=()
-	for line in $(eval ${search_exec}); do
-		LIST+=($(echo $line | awk -F ' ' '{print $1 "      "}') $(echo $line | awk -F ' ' '{print "v"$2}'))
-	done
-	unset IFS
-	local list_length=$((${#LIST[@]} / 2))
-	if [ "$list_length" -eq 0 ]; then
-		dialog --backtitle "$BACKTITLE" --title " Warning " --msgbox "No other kernels available!" 7 32
-	else
-		local target_version=$(whiptail --separate-output --title "Select kernel" --menu "ed" $((${list_length} + 7)) 80 $((${list_length})) "${LIST[@]}" 3>&1 1>&2 2>&3)
-		if [ $? -eq 0 ] && [ -n "${target_version}" ]; then
-			local branch=${target_version##*image-}
-			armbian_fw_manipulate "reinstall" "${target_version/*=/}" "${branch%%-*}"
-		fi
-	fi
-}
-