diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5-io.dts b/arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5-io.dts
index b19bbf190e1ad..81299650de4f0 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5-io.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5-io.dts
@@ -67,6 +67,16 @@
 		rockchip,jack-det;
 	};
 
+	dp0_sound: dp0-sound {
+		status = "okay";
+		compatible = "rockchip,hdmi";
+		rockchip,card-name= "rockchip-hdmi1";
+		rockchip,mclk-fs = <512>;
+		rockchip,cpu = <&spdif_tx2>;
+		rockchip,codec = <&dp0 1>;
+		rockchip,jack-det;
+	};
+
 	es8316_sound: es8316-sound {
 		status = "okay";
 		compatible = "rockchip,multicodecs-card";
@@ -107,7 +117,7 @@
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		enable-active-high;
-		gpio = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&vcc5v0_host_en>;
 		vin-supply = <&vcc5v0_sys>;
@@ -144,17 +154,6 @@
 		regulator-always-on;
 	};
 
-    gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-
-		user-led1 {
-			gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "on";
-		};
-	};
-
 	fan0: pwm-fan {
 		compatible = "pwm-fan";
 		#cooling-cells = <2>;
@@ -341,6 +340,10 @@
 	status = "okay";
 };
 
+&spdif_tx2 {
+	status = "okay";
+};
+
 &hdptxphy_hdmi0 {
 	status = "okay";
 };
@@ -394,7 +397,7 @@
 
 	usb {
 		vcc5v0_host_en: vcc5v0-host-en {
-			rockchip,pins = <3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
@@ -532,5 +535,3 @@
 	pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>;
 	status = "okay";
 };
-
-
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5.dtsi
index e9bec6fc3f405..38cecdff277c2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5.dtsi
@@ -27,6 +27,17 @@
 		mmc1 = &sdmmc;
 		mmc2 = &sdio;
 	};
+
+	gpio_leds: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+
+		status-led-blue {
+			gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+	};
 };
 
 &i2c0 {