diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index d741dda88d549..ef08608dac27c 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -153,6 +153,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-evb3-ddr3-v10.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-evb3-ddr3-v10-linux.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-evb5-lp4x-v10.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-orangepi-3b.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-orangepi-3b-v1.1.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-orangepi-3b-v2.1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-zero3.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-zero3-ap6212.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-firefly-roc-pc.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b-v1.1.dts b/arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b-v1.1.dts new file mode 100644 index 0000000000000..2692c2eddd365 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b-v1.1.dts @@ -0,0 +1,1225 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Rockchip Electronics Co., Ltd. + * + */ +/dts-v1/; + +#include +#include +#include +#include +#include +#include +#include +#include "rk3566.dtsi" +#include "rk3568-linux.dtsi" + +/ { + model = "Rockchip RK3566 OPi 3B"; + compatible = "rockchip,rk3566-orangepi-3b", "rockchip,rk3566"; + + chosen: chosen { + bootargs = "earlycon=uart8250,mmio32,0xfe660000 console=ttyFIQ0"; + }; + + /* labeled +12v in schematic */ + vcc12v_dcin: vcc12v-dcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + /* labeled +5v in schematic */ + vcc_5v: vcc-5v-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_5v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vbus: vbus { + compatible = "regulator-fixed"; + regulator-name = "vbus"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + /* labeled +3.3v For PCIe only in schematic */ + vcc3v3_pcie: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie"; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_drv>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc12v_dcin>; + }; + + hdmi_sound: hdmi-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <128>; + simple-audio-card,name = "rockchip,hdmi"; + status = "disabled"; + + simple-audio-card,cpu { + sound-dai = <&i2s0_8ch>; + }; + simple-audio-card,codec { + sound-dai = <&hdmi>; + }; + }; + + leds: leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 =<&leds_gpio>; + + led@1 { + gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>; + label = "status_led"; + linux,default-trigger = "heartbeat"; + }; + }; + + rk809_sound: rk809-sound { + status = "okay"; + compatible = "rockchip,multicodecs-card"; + rockchip,card-name = "rockchip-rk809"; + hp-det-gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>; + rockchip,format = "i2s"; + rockchip,mclk-fs = <256>; + rockchip,cpu = <&i2s1_8ch>; + rockchip,codec = <&rk809_codec>; + pinctrl-names = "default"; + pinctrl-0 = <&hp_det>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vbus>; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vbus>; + }; + + vcc5v0_usb: vcc5v0-usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vbus>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk809 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + post-power-on-delay-ms = <200>; + reset-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>; + }; + + test-power { + status = "okay"; + }; + + unisoc_uwe_bsp: uwe-bsp { + compatible = "unisoc,uwe_bsp"; + wl-reg-on = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; + bt-reg-on = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; + wl-wake-host-gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>; + bt-wake-host-gpio = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; + //sdio-ext-int-gpio = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; + unisoc,btwf-file-name = "/vendor/etc/firmware/wcnmodem.bin"; + //adma-tx; + //adma-rx; + data-irq; + blksz-512; + keep-power-on; + status = "okay"; + }; + + sprd-mtty { + compatible = "sprd,mtty"; + sprd,name = "ttyBT"; + status = "okay"; + }; + + vcc_camera_ov5647: vcc-camera-ov5647 { + status = "okay"; + compatible = "regulator-fixed"; + regulator-name = "vcc_camera_ov5647"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ext_cam_ov5647_clk: external-camera-ov5647-clock { + compatible = "fixed-clock"; + clock-frequency = <25000000>; + clock-output-names = "ext_cam_ov5647_clk"; + #clock-cells = <0>; + }; + + vcc_sd: vcc-sd { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc_sd"; + vin-supply = <&vcc3v3_sys>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + }; + + vcc5v0_otg: vcc5v0-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_otg_en>; + regulator-name = "vcc5v0_otg"; + regulator-always-on; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + #cooling-cells = <2>; + pwms = <&pwm7 0 50000 0>; + cooling-levels = <0 50 100 150 200 255>; + rockchip,temp-trips = < + 50000 1 + 55000 2 + 60000 3 + 65000 4 + 70000 5 + >; + + status = "okay"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 25000 0>; + brightness-levels = < + 0 20 20 21 21 22 22 23 + 23 24 24 25 25 26 26 27 + 27 28 28 29 29 30 30 31 + 31 32 32 33 33 34 34 35 + 35 36 36 37 37 38 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255 + >; + default-brightness-level = <200>; + }; + + edp-panel { + compatible = "simple-panel"; + backlight = <&backlight>; + prepare-delay-ms = <120>; + enable-delay-ms = <120>; + unprepare-delay-ms = <120>; + disable-delay-ms = <120>; + + display-timings { + native-mode = <&edp_timing>; + + edp_timing: timing0 { + clock-frequency = <125000000>; + hactive = <1920>; + vactive = <1080>; + hback-porch = <180>; + hfront-porch = <120>; + vback-porch = <10>; + vfront-porch = <10>; + hsync-len = <20>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <0>; + pixelclk-active = <0>; + }; + }; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&edp_out_panel>; + }; + }; + }; +}; + +&bus_npu { + bus-supply = <&vdd_logic>; + pvtm-supply = <&vdd_cpu>; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&dfi { + status = "okay"; +}; + +&dmc { + center-supply = <&vdd_logic>; + status = "disabled"; +}; + +&gpu { + clock-names = "gpu", "bus"; + interrupt-names = "gpu", "mmu", "job"; + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + status = "okay"; + rockchip,phy-table = + <92812500 0x8009 0x0000 0x0270>, + <165000000 0x800b 0x0000 0x026d>, + <185625000 0x800b 0x0000 0x01ed>, + <297000000 0x800b 0x0000 0x01ad>, + <594000000 0x8029 0x0000 0x0088>, + <000000000 0x0000 0x0000 0x0000>; +}; + +&hdmi_in_vp0 { + status = "okay"; +}; + +&hdmi_in_vp1 { + status = "disabled"; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: syr837@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + vin-supply = <&vcc5v0_sys>; + regulator-compatible = "fan53555-reg"; + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1390000>; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <1>; + regulator-ramp-delay = <2300>; + fcs,suspend-voltage-selector = <1>; + regulator-boot-on; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default", "pmic-sleep", + "pmic-power-off", "pmic-reset"; + pinctrl-0 = <&pmic_int>; + pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>; + pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>; + pinctrl-3 = <&soc_slppin_gpio>, <&rk817_slppin_rst>; + + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + //fb-inner-reg-idxs = <2>; + /* 1: rst regs (default in codes), 0: rst the pmic */ + pmic-reset-func = <0>; + /* not save the PMIC_POWER_EN register in uboot */ + not-save-power-en = <1>; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + + pwrkey { + status = "okay"; + }; + + pinctrl_rk8xx: pinctrl_rk8xx { + gpio-controller; + #gpio-cells = <2>; + + rk817_slppin_null: rk817_slppin_null { + pins = "gpio_slp"; + function = "pin_fun0"; + }; + + rk817_slppin_slp: rk817_slppin_slp { + pins = "gpio_slp"; + function = "pin_fun1"; + }; + + rk817_slppin_pwrdn: rk817_slppin_pwrdn { + pins = "gpio_slp"; + function = "pin_fun2"; + }; + + rk817_slppin_rst: rk817_slppin_rst { + pins = "gpio_slp"; + function = "pin_fun3"; + }; + }; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_logic"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_gpu"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-name = "vcc_ddr"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_npu"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda0v9_image"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda_0v9"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda0v9_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vccio_acodec"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca_1v8"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_image"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_3v3"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc3v3_sd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + + rk809_codec: codec { + #sound-dai-cells = <1>; + compatible = "rockchip,rk809-codec", "rockchip,rk817-codec"; + clocks = <&cru I2S1_MCLKOUT>; + clock-names = "mclk"; + assigned-clocks = <&cru I2S1_MCLKOUT>, <&cru I2S1_MCLK_TX_IOE>; + assigned-clock-rates = <12288000>; + assigned-clock-parents = <&cru I2S1_MCLKOUT_TX>, <&cru I2S1_MCLKOUT_TX>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_mclk>; + hp-volume = <20>; + spk-volume = <3>; + mic-in-differential; + status = "okay"; + }; + }; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>; +}; + +&pwm7 { + status = "okay"; +}; + +&i2s0_8ch { + status = "okay"; +}; + +&i2s1_8ch { + status = "okay"; + rockchip,clk-trcm = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_sclktx + &i2s1m0_lrcktx + &i2s1m0_sdi0 + &i2s1m0_sdo0>; +}; + +&iep { + status = "okay"; +}; + +&iep_mmu { + status = "okay"; +}; + +&jpegd { + status = "okay"; +}; + +&jpegd_mmu { + status = "okay"; +}; + +&mpp_srv { + status = "okay"; +}; + +&pinctrl { + wireless-bluetooth { + uart1_gpios: uart1-gpios { + rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sd { + sdmmc0_pwr_h: sdmmc0-pwr-h { + rockchip,pins = + <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + mxc6655xa { + mxc6655xa_irq_gpio: mxc6655xa_irq_gpio { + rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int: pmic_int { + rockchip,pins = + <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + soc_slppin_gpio: soc_slppin_gpio { + rockchip,pins = + <0 RK_PA2 RK_FUNC_GPIO &pcfg_output_low>; + }; + + soc_slppin_slp: soc_slppin_slp { + rockchip,pins = + <0 RK_PA2 1 &pcfg_pull_none>; + }; + + soc_slppin_rst: soc_slppin_rst { + rockchip,pins = + <0 RK_PA2 2 &pcfg_pull_none>; + }; + }; + + touch { + touch_gpio: touch-gpio { + rockchip,pins = + <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>, + <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc5v0_otg_en: vcc5v0-otg-en { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wireless-bluetooth { + uart8_gpios: uart8-gpios { + rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + work-led { + leds_gpio: leds-gpio { + rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + headphone { + hp_det: hp-det { + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + pcie { + pcie_drv: pcie-drv { + rockchip,pins = + <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + edp { + edp_hpd: edp-hpd { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bl_en: bl-en { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; +}; + + /* + * There are 10 independent IO domains in RK3566/RK3568, including PMUIO[0:2] and VCCIO[1:7]. + * 1/ PMUIO0 and PMUIO1 are fixed-level power domains which cannot be configured; + * 2/ PMUIO2 and VCCIO1,VCCIO[3:7] domains require that their hardware power supply voltages + * must be consistent with the software configuration correspondingly + * a/ When the hardware IO level is connected to 1.8V, the software voltage configuration + * should also be configured to 1.8V accordingly; + * b/ When the hardware IO level is connected to 3.3V, the software voltage configuration + * should also be configured to 3.3V accordingly; + * 3/ VCCIO2 voltage control selection (0xFDC20140) + * BIT[0]: 0x0: from GPIO_0A7 (default) + * BIT[0]: 0x1: from GRF + * Default is determined by Pin FLASH_VOL_SEL/GPIO0_A7: + * L:VCCIO2 must supply 3.3V + * H:VCCIO2 must supply 1.8V + */ + +&pmu_io_domains { + status = "okay"; + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vcc_3v3>; + vccio2-supply = <&vcc_1v8>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_3v3>; + vccio7-supply = <&vcc_3v3>; +}; + +&rk_rga { + status = "okay"; +}; + +&rkvdec { + status = "okay"; +}; + +&rkvdec_mmu { + status = "okay"; +}; + +&rkvenc { + venc-supply = <&vdd_logic>; + status = "okay"; +}; + +&rkvenc_mmu { + status = "okay"; +}; + +&rknpu { + rknpu-supply = <&vdd_npu>; + status = "okay"; +}; + +&rknpu_mmu { + status = "okay"; +}; + +&route_hdmi { + status = "disabled"; + connect = <&vp0_out_hdmi>; +}; + +&saradc { + status = "okay"; + vref-supply = <&vcca_1v8>; +}; + +&sdhci { + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + max-frequency = <200000000>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + status = "okay"; +}; + +&sdmmc0 { + max-frequency = <150000000>; + no-sdio; + no-mmc; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + sd-uhs-sdr104; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + status = "okay"; +}; + +&sfc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&fspi_pins>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <100000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + }; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy0_host { + phy-supply = <&vbus>; + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +&u2phy1_host { + status = "okay"; +}; + +&u2phy1_otg { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd_dwc3 { + dr_mode = "host"; + extcon = <&usb2phy0>; + status = "okay"; +}; + +&usbdrd30 { + status = "okay"; +}; + +&usbhost_dwc3 { + status = "okay"; +}; + +&usbhost30 { + status = "okay"; +}; + +&vdpu { + status = "okay"; +}; + +&vdpu_mmu { + status = "okay"; +}; + +&vepu { + status = "okay"; +}; + +&vepu_mmu { + status = "okay"; +}; + +&vop { + status = "okay"; + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; +}; + +&vop_mmu { + status = "okay"; +}; + +&mdio1 { + rgmii_phy0: phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + }; +}; + +&gmac1 { + phy-mode = "rgmii"; + clock_in_out = "input"; + + snps,reset-gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + /* Reset time is 20ms, 100ms for rtl8211f */ + //snps,reset-delays-us = <0 20000 100000>; + snps,reset-delays-us = <0 50000 200000>; + + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; + assigned-clock-rates = <0>, <125000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m0_miim + &gmac1m0_tx_bus2 + &gmac1m0_rx_bus2 + &gmac1m0_rgmii_clk + &gmac1m0_clkinout + &gmac1m0_rgmii_bus>; + + tx_delay = <0x30>; + rx_delay = <0x10>; + + phy-handle = <&rgmii_phy0>; + status = "okay"; +}; + +&sdmmc1 { + max-frequency = <150000000>; + no-sd; + no-mmc; + bus-width = <4>; + disable-wp; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; + sd-uhs-sdr104; + status = "okay"; +}; + +&combphy1_usq { + status = "okay"; +}; + +&combphy2_psq { + status = "okay"; +}; + +&pcie2x1 { + reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&vp0 { + rockchip,plane-mask = <(1 << ROCKCHIP_VOP2_CLUSTER0 | 1 << ROCKCHIP_VOP2_ESMART0 | 1 << + ROCKCHIP_VOP2_SMART0 | 1 << ROCKCHIP_VOP2_CLUSTER1 | 1 << ROCKCHIP_VOP2_ESMART1 | 1 << + ROCKCHIP_VOP2_SMART1)>; + rockchip,primary-plane = ; +}; + +&i2c1 { + status = "okay"; + + ov5647: ov5647@36 { + status = "disabled"; + compatible = "ovti,ov5647"; + reg = <0x36>; + clocks = <&ext_cam_ov5647_clk>; + clock-names = "ext_cam_ov5647_clk"; + pwdn-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; + rockchip,camera-module-index = <0>; + rockchip,camera-module-facing = "back"; + rockchip,camera-module-name = "LMM248"; + rockchip,camera-module-lens-name = "YXC-M804A2"; + port { + ov5647_out: endpoint { + remote-endpoint = <&dphy1_in>; + data-lanes = <1 2>; + }; + }; + }; + + raspits_panel: raspits-panel@45 { + status = "disabled"; + compatible = "raspberrypi,7inch-touchscreen-panel"; + reg = <0x45>; + + port { + panel_in_dsi1: endpoint { + remote-endpoint = <&dsi1_out_panel>; + }; + }; + }; + + raspits_touch_ft5426: raspits-touch-ft5426@38 { + status = "disabled"; + compatible = "raspits_ft5426"; + reg = <0x38>; + }; +}; + +&csi2_dphy_hw { + status = "disabled"; +}; + +&csi2_dphy0 { + status = "disabled"; +}; + +&csi2_dphy1 { + status = "disabled"; + /* + * dphy1 only used for split mode, + * can be used concurrently with dphy2 + * full mode and split mode are mutually exclusive + */ + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + dphy1_in: endpoint@1 { + reg = <1>; + remote-endpoint = <&ov5647_out>; + data-lanes = <1 2>; + }; + }; + + port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + dphy1_out: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp0_in>; + }; + }; + }; +}; + +&rkisp { + status = "disabled"; +}; + +&rkisp_mmu { + status = "disabled"; +}; + +&rkisp_vir0 { + status = "disabled"; + port { + #address-cells = <1>; + #size-cells = <0>; + + isp0_in: endpoint@0 { + reg = <0>; + remote-endpoint = <&dphy1_out>; + }; + }; +}; + +&edp { + status = "disabled"; + force-hpd; + hpd-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&edp_hpd &bl_en>; + + ports { + port@1 { + reg = <1>; + + edp_out_panel: endpoint { + remote-endpoint = <&panel_in_edp>; + }; + }; + }; +}; + +&edp_phy { + status = "disabled"; +}; + +&route_edp { + status = "disabled"; +}; + +&pwm2 { + status = "disabled"; +}; + +&dsi1 { + status = "disabled"; + + ports { + port@1 { + reg = <1>; + + dsi1_out_panel: endpoint { + remote-endpoint = <&panel_in_dsi1>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b-v2.1.dts b/arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b-v2.1.dts new file mode 100644 index 0000000000000..e15fabd6c48af --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b-v2.1.dts @@ -0,0 +1,1238 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Rockchip Electronics Co., Ltd. + * + */ +/dts-v1/; + +#include +#include +#include +#include +#include +#include +#include +#include "rk3566.dtsi" +#include "rk3568-linux.dtsi" + +/ { + model = "Rockchip RK3566 OPi 3B"; + compatible = "rockchip,rk3566-orangepi-3b", "rockchip,rk3566"; + + chosen: chosen { + bootargs = "earlycon=uart8250,mmio32,0xfe660000 console=ttyFIQ0"; + }; + + /* labeled +12v in schematic */ + vcc12v_dcin: vcc12v-dcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + /* labeled +5v in schematic */ + vcc_5v: vcc-5v-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_5v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vbus: vbus { + compatible = "regulator-fixed"; + regulator-name = "vbus"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + /* labeled +3.3v For PCIe only in schematic */ + vcc3v3_pcie: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie"; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_drv>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc12v_dcin>; + }; + + leds: leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 =<&leds_gpio>; + + led@1 { + gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>; + label = "status_led"; + linux,default-trigger = "heartbeat"; + }; + }; + + rk809_sound: rk809-sound { + status = "okay"; + compatible = "rockchip,multicodecs-card"; + rockchip,card-name = "rockchip-rk809"; + hp-det-gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>; + rockchip,format = "i2s"; + rockchip,mclk-fs = <256>; + rockchip,cpu = <&i2s1_8ch>; + rockchip,codec = <&rk809_codec>; + pinctrl-names = "default"; + pinctrl-0 = <&hp_det>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vbus>; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vbus>; + }; + + vcc5v0_usb: vcc5v0-usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vbus>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk809 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + post-power-on-delay-ms = <200>; + reset-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>; + }; + + test-power { + status = "okay"; + }; + + vcc_camera_ov5647: vcc-camera-ov5647 { + status = "okay"; + compatible = "regulator-fixed"; + regulator-name = "vcc_camera_ov5647"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ext_cam_ov5647_clk: external-camera-ov5647-clock { + compatible = "fixed-clock"; + clock-frequency = <25000000>; + clock-output-names = "ext_cam_ov5647_clk"; + #clock-cells = <0>; + }; + + vcc_sd: vcc-sd { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc_sd"; + vin-supply = <&vcc3v3_sys>; + }; + + vccio_phy: vcc-phy-regulator { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vccio_phy"; + regulator-always-on; + regulator-boot-on; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + }; + + vcc5v0_otg: vcc5v0-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_otg_en>; + regulator-name = "vcc5v0_otg"; + regulator-always-on; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + #cooling-cells = <2>; + pwms = <&pwm7 0 20000000 0>; + cooling-levels = <0 50 100 150 200 255>; + rockchip,temp-trips = < + 50000 1 + 55000 2 + 60000 3 + 65000 4 + 70000 5 + >; + + status = "okay"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 25000 0>; + brightness-levels = < + 0 20 20 21 21 22 22 23 + 23 24 24 25 25 26 26 27 + 27 28 28 29 29 30 30 31 + 31 32 32 33 33 34 34 35 + 35 36 36 37 37 38 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255 + >; + default-brightness-level = <200>; + }; + + edp-panel { + compatible = "simple-panel"; + backlight = <&backlight>; + prepare-delay-ms = <120>; + enable-delay-ms = <120>; + unprepare-delay-ms = <120>; + disable-delay-ms = <120>; + + display-timings { + native-mode = <&edp_timing>; + + edp_timing: timing0 { + clock-frequency = <125000000>; + hactive = <1920>; + vactive = <1080>; + hback-porch = <180>; + hfront-porch = <120>; + vback-porch = <10>; + vfront-porch = <10>; + hsync-len = <20>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <0>; + pixelclk-active = <0>; + }; + }; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&edp_out_panel>; + }; + }; + }; + + usb_host0_xhci: usb@fcc00000 { + compatible = "rockchip,rk3568-dwc3", "snps,dwc3"; + reg = <0x0 0xfcc00000 0x0 0x400000>; + interrupts = ; + clocks = <&cru CLK_USB3OTG0_REF>, <&cru CLK_USB3OTG0_SUSPEND>, + <&cru ACLK_USB3OTG0>; + clock-names = "ref_clk", "suspend_clk", + "bus_clk"; + dr_mode = "host"; + phy_type = "utmi_wide"; + power-domains = <&power RK3568_PD_PIPE>; + resets = <&cru SRST_USB3OTG0>; + snps,dis_u2_susphy_quirk; + phys = <&u2phy0_otg>; + phy-names = "usb2-phy"; + extcon = <&usb2phy0>; + maximum-speed = "high-speed"; + status = "okay"; + }; + + usb_host1_xhci: usb@fd000000 { + compatible = "rockchip,rk3568-dwc3", "snps,dwc3"; + reg = <0x0 0xfd000000 0x0 0x400000>; + interrupts = ; + clocks = <&cru CLK_USB3OTG1_REF>, <&cru CLK_USB3OTG1_SUSPEND>, + <&cru ACLK_USB3OTG1>; + clock-names = "ref_clk", "suspend_clk", + "bus_clk"; + dr_mode = "host"; + phys = <&u2phy0_host>, <&combphy1_usq PHY_TYPE_USB3>; + phy-names = "usb2-phy", "usb3-phy"; + phy_type = "utmi_wide"; + power-domains = <&power RK3568_PD_PIPE>; + resets = <&cru SRST_USB3OTG1>; + snps,dis_u2_susphy_quirk; + status = "okay"; + }; +}; + +&bus_npu { + bus-supply = <&vdd_logic>; + pvtm-supply = <&vdd_cpu>; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&dfi { + status = "okay"; +}; + +&dmc { + center-supply = <&vdd_logic>; + status = "disabled"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + status = "okay"; + rockchip,phy-table = + <92812500 0x8009 0x0000 0x0270>, + <165000000 0x800b 0x0000 0x026d>, + <185625000 0x800b 0x0000 0x01ed>, + <297000000 0x800b 0x0000 0x01ad>, + <594000000 0x8029 0x0000 0x0088>, + <000000000 0x0000 0x0000 0x0000>; +}; + +&hdmi_in_vp0 { + status = "okay"; +}; + +&hdmi_in_vp1 { + status = "disabled"; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: syr837@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + vin-supply = <&vcc5v0_sys>; + regulator-compatible = "fan53555-reg"; + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1390000>; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <1>; + regulator-ramp-delay = <2300>; + fcs,suspend-voltage-selector = <1>; + regulator-boot-on; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default", "pmic-sleep", + "pmic-power-off", "pmic-reset"; + pinctrl-0 = <&pmic_int>; + pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>; + pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>; + pinctrl-3 = <&soc_slppin_gpio>, <&rk817_slppin_rst>; + + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + //fb-inner-reg-idxs = <2>; + /* 1: rst regs (default in codes), 0: rst the pmic */ + pmic-reset-func = <0>; + /* not save the PMIC_POWER_EN register in uboot */ + not-save-power-en = <1>; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + + pwrkey { + status = "okay"; + }; + + pinctrl_rk8xx: pinctrl_rk8xx { + gpio-controller; + #gpio-cells = <2>; + + rk817_slppin_null: rk817_slppin_null { + pins = "gpio_slp"; + function = "pin_fun0"; + }; + + rk817_slppin_slp: rk817_slppin_slp { + pins = "gpio_slp"; + function = "pin_fun1"; + }; + + rk817_slppin_pwrdn: rk817_slppin_pwrdn { + pins = "gpio_slp"; + function = "pin_fun2"; + }; + + rk817_slppin_rst: rk817_slppin_rst { + pins = "gpio_slp"; + function = "pin_fun3"; + }; + }; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_logic"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_gpu"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-name = "vcc_ddr"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_npu"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda0v9_image"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda_0v9"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda0v9_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vccio_acodec"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca_1v8"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_image"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_3v3"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc3v3_sd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + + rk809_codec: codec { + #sound-dai-cells = <1>; + compatible = "rockchip,rk809-codec", "rockchip,rk817-codec"; + clocks = <&cru I2S1_MCLKOUT>; + clock-names = "mclk"; + assigned-clocks = <&cru I2S1_MCLKOUT>, <&cru I2S1_MCLK_TX_IOE>; + assigned-clock-rates = <12288000>; + assigned-clock-parents = <&cru I2S1_MCLKOUT_TX>, <&cru I2S1_MCLKOUT_TX>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_mclk>; + hp-volume = <20>; + spk-volume = <3>; + mic-in-differential; + status = "okay"; + }; + }; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm4345c5"; + clocks = <&rk809 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reset_h>; + }; +}; + +&pwm7 { + status = "okay"; +}; + +&i2s0_8ch { + status = "okay"; +}; + +&i2s1_8ch { + status = "okay"; + rockchip,clk-trcm = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_sclktx + &i2s1m0_lrcktx + &i2s1m0_sdi0 + &i2s1m0_sdo0>; +}; + +&iep { + status = "okay"; +}; + +&iep_mmu { + status = "okay"; +}; + +&jpegd { + status = "okay"; +}; + +&jpegd_mmu { + status = "okay"; +}; + +&mpp_srv { + status = "okay"; +}; + +&pinctrl { + bt { + bt_reset_h: bt-reset-h { + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sd { + sdmmc0_pwr_h: sdmmc0-pwr-h { + rockchip,pins = + <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + mxc6655xa { + mxc6655xa_irq_gpio: mxc6655xa_irq_gpio { + rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int: pmic_int { + rockchip,pins = + <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + soc_slppin_gpio: soc_slppin_gpio { + rockchip,pins = + <0 RK_PA2 RK_FUNC_GPIO &pcfg_output_low>; + }; + + soc_slppin_slp: soc_slppin_slp { + rockchip,pins = + <0 RK_PA2 1 &pcfg_pull_none>; + }; + + soc_slppin_rst: soc_slppin_rst { + rockchip,pins = + <0 RK_PA2 2 &pcfg_pull_none>; + }; + }; + + touch { + touch_gpio: touch-gpio { + rockchip,pins = + <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>, + <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc5v0_otg_en: vcc5v0-otg-en { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wireless-bluetooth { + uart8_gpios: uart8-gpios { + rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + work-led { + leds_gpio: leds-gpio { + rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + headphone { + hp_det: hp-det { + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + pcie { + pcie_drv: pcie-drv { + rockchip,pins = + <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + edp { + edp_hpd: edp-hpd { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bl_en: bl-en { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; +}; + + /* + * There are 10 independent IO domains in RK3566/RK3568, including PMUIO[0:2] and VCCIO[1:7]. + * 1/ PMUIO0 and PMUIO1 are fixed-level power domains which cannot be configured; + * 2/ PMUIO2 and VCCIO1,VCCIO[3:7] domains require that their hardware power supply voltages + * must be consistent with the software configuration correspondingly + * a/ When the hardware IO level is connected to 1.8V, the software voltage configuration + * should also be configured to 1.8V accordingly; + * b/ When the hardware IO level is connected to 3.3V, the software voltage configuration + * should also be configured to 3.3V accordingly; + * 3/ VCCIO2 voltage control selection (0xFDC20140) + * BIT[0]: 0x0: from GPIO_0A7 (default) + * BIT[0]: 0x1: from GRF + * Default is determined by Pin FLASH_VOL_SEL/GPIO0_A7: + * L:VCCIO2 must supply 3.3V + * H:VCCIO2 must supply 1.8V + */ + +&pmu_io_domains { + status = "okay"; + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vcc_3v3>; + vccio2-supply = <&vcc_1v8>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vccio_phy>; + vccio6-supply = <&vcc_3v3>; + vccio7-supply = <&vcc_3v3>; +}; + +&rk_rga { + status = "okay"; +}; + +&rkvdec { + status = "okay"; +}; + +&rkvdec_mmu { + status = "okay"; +}; + +&rkvenc { + venc-supply = <&vdd_logic>; + status = "okay"; +}; + +&rkvenc_mmu { + status = "okay"; +}; + +&rknpu { + rknpu-supply = <&vdd_npu>; + status = "okay"; +}; + +&rknpu_mmu { + status = "okay"; +}; + +&route_hdmi { + status = "disabled"; + connect = <&vp0_out_hdmi>; +}; + +&saradc { + status = "okay"; + vref-supply = <&vcca_1v8>; +}; + +&sdhci { + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + max-frequency = <200000000>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + status = "okay"; +}; + +&sdmmc0 { + max-frequency = <150000000>; + no-sdio; + no-mmc; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + sd-uhs-sdr104; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + status = "okay"; +}; + +&sfc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&fspi_pins>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <100000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + }; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy0_host { + phy-supply = <&vbus>; + status = "okay"; +}; + +&u2phy0_otg { + vbus-supply = <&vcc5v0_otg>; + status = "okay"; +}; + +&u2phy1_host { + status = "okay"; +}; + +&u2phy1_otg { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&vdpu { + status = "okay"; +}; + +&vdpu_mmu { + status = "okay"; +}; + +&vepu { + status = "okay"; +}; + +&vepu_mmu { + status = "okay"; +}; + +&vop { + status = "okay"; + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; +}; + +&vop_mmu { + status = "okay"; +}; + +&mdio1 { + rgmii_phy0: phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + }; +}; + +&gmac1 { + phy-mode = "rgmii"; + clock_in_out = "input"; + + snps,reset-gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + /* Reset time is 20ms, 100ms for rtl8211f */ + //snps,reset-delays-us = <0 20000 100000>; + snps,reset-delays-us = <0 50000 200000>; + + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; + assigned-clock-rates = <0>, <125000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m0_miim + &gmac1m0_tx_bus2 + &gmac1m0_rx_bus2 + &gmac1m0_rgmii_clk + &gmac1m0_clkinout + &gmac1m0_rgmii_bus>; + + tx_delay = <0x30>; + rx_delay = <0x10>; + + phy-handle = <&rgmii_phy0>; + status = "okay"; +}; + +&sdmmc1 { + max-frequency = <150000000>; + no-sd; + no-mmc; + bus-width = <4>; + disable-wp; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; + sd-uhs-sdr104; + status = "okay"; +}; + +&combphy1_usq { + status = "okay"; +}; + +&combphy2_psq { + status = "okay"; +}; + +&pcie2x1 { + reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&vp0 { + rockchip,plane-mask = <(1 << ROCKCHIP_VOP2_CLUSTER0 | 1 << ROCKCHIP_VOP2_ESMART0 | 1 << + ROCKCHIP_VOP2_SMART0 | 1 << ROCKCHIP_VOP2_CLUSTER1 | 1 << ROCKCHIP_VOP2_ESMART1 | 1 << + ROCKCHIP_VOP2_SMART1)>; + rockchip,primary-plane = ; +}; + +&i2c1 { + status = "okay"; + + ov5647: ov5647@36 { + status = "disabled"; + compatible = "ovti,ov5647"; + reg = <0x36>; + clocks = <&ext_cam_ov5647_clk>; + clock-names = "ext_cam_ov5647_clk"; + pwdn-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; + rockchip,camera-module-index = <0>; + rockchip,camera-module-facing = "back"; + rockchip,camera-module-name = "LMM248"; + rockchip,camera-module-lens-name = "YXC-M804A2"; + port { + ov5647_out: endpoint { + remote-endpoint = <&dphy1_in>; + data-lanes = <1 2>; + }; + }; + }; + + raspits_panel: raspits-panel@45 { + status = "disabled"; + compatible = "raspberrypi,7inch-touchscreen-panel"; + reg = <0x45>; + + port { + panel_in_dsi1: endpoint { + remote-endpoint = <&dsi1_out_panel>; + }; + }; + }; + + raspits_touch_ft5426: raspits-touch-ft5426@38 { + status = "disabled"; + compatible = "raspits_ft5426"; + reg = <0x38>; + }; +}; + +&csi2_dphy_hw { + status = "disabled"; +}; + +&csi2_dphy0 { + status = "disabled"; +}; + +&csi2_dphy1 { + status = "disabled"; + /* + * dphy1 only used for split mode, + * can be used concurrently with dphy2 + * full mode and split mode are mutually exclusive + */ + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + dphy1_in: endpoint@1 { + reg = <1>; + remote-endpoint = <&ov5647_out>; + data-lanes = <1 2>; + }; + }; + + port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + dphy1_out: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp0_in>; + }; + }; + }; +}; + +&rkisp { + status = "disabled"; +}; + +&rkisp_mmu { + status = "disabled"; +}; + +&rkisp_vir0 { + status = "disabled"; + port { + #address-cells = <1>; + #size-cells = <0>; + + isp0_in: endpoint@0 { + reg = <0>; + remote-endpoint = <&dphy1_out>; + }; + }; +}; + +&edp { + status = "disabled"; + force-hpd; + hpd-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&edp_hpd &bl_en>; + + ports { + port@1 { + reg = <1>; + + edp_out_panel: endpoint { + remote-endpoint = <&panel_in_edp>; + }; + }; + }; +}; + +&edp_phy { + status = "disabled"; +}; + +&route_edp { + status = "disabled"; +}; + +&pwm2 { + status = "disabled"; +}; + +&dsi1 { + status = "disabled"; + + ports { + port@1 { + reg = <1>; + + dsi1_out_panel: endpoint { + remote-endpoint = <&panel_in_dsi1>; + }; + }; + }; +}; + +/delete-node/ &usbdrd30; +/delete-node/ &usbhost30; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b.dts b/arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b.dts index 2692c2eddd365..f97e33bd8108a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b.dts @@ -1,1225 +1,3 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 Rockchip Electronics Co., Ltd. - * - */ -/dts-v1/; -#include -#include -#include -#include -#include -#include -#include -#include "rk3566.dtsi" -#include "rk3568-linux.dtsi" - -/ { - model = "Rockchip RK3566 OPi 3B"; - compatible = "rockchip,rk3566-orangepi-3b", "rockchip,rk3566"; - - chosen: chosen { - bootargs = "earlycon=uart8250,mmio32,0xfe660000 console=ttyFIQ0"; - }; - - /* labeled +12v in schematic */ - vcc12v_dcin: vcc12v-dcin-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc12v_dcin"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - /* labeled +5v in schematic */ - vcc_5v: vcc-5v-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_5v"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_dcin>; - }; - - vbus: vbus { - compatible = "regulator-fixed"; - regulator-name = "vbus"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - /* labeled +3.3v For PCIe only in schematic */ - vcc3v3_pcie: vcc3v3-pcie-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_pcie"; - regulator-always-on; - regulator-boot-on; - enable-active-high; - gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_drv>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc12v_dcin>; - }; - - hdmi_sound: hdmi-sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,mclk-fs = <128>; - simple-audio-card,name = "rockchip,hdmi"; - status = "disabled"; - - simple-audio-card,cpu { - sound-dai = <&i2s0_8ch>; - }; - simple-audio-card,codec { - sound-dai = <&hdmi>; - }; - }; - - leds: leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 =<&leds_gpio>; - - led@1 { - gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>; - label = "status_led"; - linux,default-trigger = "heartbeat"; - }; - }; - - rk809_sound: rk809-sound { - status = "okay"; - compatible = "rockchip,multicodecs-card"; - rockchip,card-name = "rockchip-rk809"; - hp-det-gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>; - rockchip,format = "i2s"; - rockchip,mclk-fs = <256>; - rockchip,cpu = <&i2s1_8ch>; - rockchip,codec = <&rk809_codec>; - pinctrl-names = "default"; - pinctrl-0 = <&hp_det>; - }; - - vcc3v3_sys: vcc3v3-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vbus>; - }; - - vcc5v0_sys: vcc5v0-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vbus>; - }; - - vcc5v0_usb: vcc5v0-usb { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_usb"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vbus>; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&rk809 1>; - clock-names = "ext_clock"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h>; - - /* - * On the module itself this is one of these (depending - * on the actual card populated): - * - SDIO_RESET_L_WL_REG_ON - * - PDN (power down when low) - */ - post-power-on-delay-ms = <200>; - reset-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>; - }; - - test-power { - status = "okay"; - }; - - unisoc_uwe_bsp: uwe-bsp { - compatible = "unisoc,uwe_bsp"; - wl-reg-on = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; - bt-reg-on = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; - wl-wake-host-gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>; - bt-wake-host-gpio = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; - //sdio-ext-int-gpio = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; - unisoc,btwf-file-name = "/vendor/etc/firmware/wcnmodem.bin"; - //adma-tx; - //adma-rx; - data-irq; - blksz-512; - keep-power-on; - status = "okay"; - }; - - sprd-mtty { - compatible = "sprd,mtty"; - sprd,name = "ttyBT"; - status = "okay"; - }; - - vcc_camera_ov5647: vcc-camera-ov5647 { - status = "okay"; - compatible = "regulator-fixed"; - regulator-name = "vcc_camera_ov5647"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - ext_cam_ov5647_clk: external-camera-ov5647-clock { - compatible = "fixed-clock"; - clock-frequency = <25000000>; - clock-output-names = "ext_cam_ov5647_clk"; - #clock-cells = <0>; - }; - - vcc_sd: vcc-sd { - compatible = "regulator-fixed"; - regulator-max-microvolt = <3300000>; - regulator-min-microvolt = <3300000>; - regulator-name = "vcc_sd"; - vin-supply = <&vcc3v3_sys>; - }; - - vcc5v0_host: vcc5v0-host-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_host_en>; - regulator-name = "vcc5v0_host"; - regulator-always-on; - }; - - vcc5v0_otg: vcc5v0-otg-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_otg_en>; - regulator-name = "vcc5v0_otg"; - regulator-always-on; - }; - - fan: pwm-fan { - compatible = "pwm-fan"; - #cooling-cells = <2>; - pwms = <&pwm7 0 50000 0>; - cooling-levels = <0 50 100 150 200 255>; - rockchip,temp-trips = < - 50000 1 - 55000 2 - 60000 3 - 65000 4 - 70000 5 - >; - - status = "okay"; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm2 0 25000 0>; - brightness-levels = < - 0 20 20 21 21 22 22 23 - 23 24 24 25 25 26 26 27 - 27 28 28 29 29 30 30 31 - 31 32 32 33 33 34 34 35 - 35 36 36 37 37 38 38 39 - 40 41 42 43 44 45 46 47 - 48 49 50 51 52 53 54 55 - 56 57 58 59 60 61 62 63 - 64 65 66 67 68 69 70 71 - 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 - 88 89 90 91 92 93 94 95 - 96 97 98 99 100 101 102 103 - 104 105 106 107 108 109 110 111 - 112 113 114 115 116 117 118 119 - 120 121 122 123 124 125 126 127 - 128 129 130 131 132 133 134 135 - 136 137 138 139 140 141 142 143 - 144 145 146 147 148 149 150 151 - 152 153 154 155 156 157 158 159 - 160 161 162 163 164 165 166 167 - 168 169 170 171 172 173 174 175 - 176 177 178 179 180 181 182 183 - 184 185 186 187 188 189 190 191 - 192 193 194 195 196 197 198 199 - 200 201 202 203 204 205 206 207 - 208 209 210 211 212 213 214 215 - 216 217 218 219 220 221 222 223 - 224 225 226 227 228 229 230 231 - 232 233 234 235 236 237 238 239 - 240 241 242 243 244 245 246 247 - 248 249 250 251 252 253 254 255 - >; - default-brightness-level = <200>; - }; - - edp-panel { - compatible = "simple-panel"; - backlight = <&backlight>; - prepare-delay-ms = <120>; - enable-delay-ms = <120>; - unprepare-delay-ms = <120>; - disable-delay-ms = <120>; - - display-timings { - native-mode = <&edp_timing>; - - edp_timing: timing0 { - clock-frequency = <125000000>; - hactive = <1920>; - vactive = <1080>; - hback-porch = <180>; - hfront-porch = <120>; - vback-porch = <10>; - vfront-porch = <10>; - hsync-len = <20>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <0>; - pixelclk-active = <0>; - }; - }; - - port { - panel_in_edp: endpoint { - remote-endpoint = <&edp_out_panel>; - }; - }; - }; -}; - -&bus_npu { - bus-supply = <&vdd_logic>; - pvtm-supply = <&vdd_cpu>; - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vdd_cpu>; -}; - -&dfi { - status = "okay"; -}; - -&dmc { - center-supply = <&vdd_logic>; - status = "disabled"; -}; - -&gpu { - clock-names = "gpu", "bus"; - interrupt-names = "gpu", "mmu", "job"; - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&hdmi { - status = "okay"; - rockchip,phy-table = - <92812500 0x8009 0x0000 0x0270>, - <165000000 0x800b 0x0000 0x026d>, - <185625000 0x800b 0x0000 0x01ed>, - <297000000 0x800b 0x0000 0x01ad>, - <594000000 0x8029 0x0000 0x0088>, - <000000000 0x0000 0x0000 0x0000>; -}; - -&hdmi_in_vp0 { - status = "okay"; -}; - -&hdmi_in_vp1 { - status = "disabled"; -}; - -&hdmi_sound { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - vdd_cpu: syr837@40 { - compatible = "silergy,syr827"; - reg = <0x40>; - vin-supply = <&vcc5v0_sys>; - regulator-compatible = "fan53555-reg"; - regulator-name = "vdd_cpu"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1390000>; - regulator-init-microvolt = <900000>; - regulator-initial-mode = <1>; - regulator-ramp-delay = <2300>; - fcs,suspend-voltage-selector = <1>; - regulator-boot-on; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - rk809: pmic@20 { - compatible = "rockchip,rk809"; - reg = <0x20>; - interrupt-parent = <&gpio0>; - interrupts = <3 IRQ_TYPE_LEVEL_LOW>; - - pinctrl-names = "default", "pmic-sleep", - "pmic-power-off", "pmic-reset"; - pinctrl-0 = <&pmic_int>; - pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>; - pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>; - pinctrl-3 = <&soc_slppin_gpio>, <&rk817_slppin_rst>; - - rockchip,system-power-controller; - wakeup-source; - #clock-cells = <1>; - clock-output-names = "rk808-clkout1", "rk808-clkout2"; - //fb-inner-reg-idxs = <2>; - /* 1: rst regs (default in codes), 0: rst the pmic */ - pmic-reset-func = <0>; - /* not save the PMIC_POWER_EN register in uboot */ - not-save-power-en = <1>; - - vcc1-supply = <&vcc3v3_sys>; - vcc2-supply = <&vcc3v3_sys>; - vcc3-supply = <&vcc3v3_sys>; - vcc4-supply = <&vcc3v3_sys>; - vcc5-supply = <&vcc3v3_sys>; - vcc6-supply = <&vcc3v3_sys>; - vcc7-supply = <&vcc3v3_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc3v3_sys>; - - pwrkey { - status = "okay"; - }; - - pinctrl_rk8xx: pinctrl_rk8xx { - gpio-controller; - #gpio-cells = <2>; - - rk817_slppin_null: rk817_slppin_null { - pins = "gpio_slp"; - function = "pin_fun0"; - }; - - rk817_slppin_slp: rk817_slppin_slp { - pins = "gpio_slp"; - function = "pin_fun1"; - }; - - rk817_slppin_pwrdn: rk817_slppin_pwrdn { - pins = "gpio_slp"; - function = "pin_fun2"; - }; - - rk817_slppin_rst: rk817_slppin_rst { - pins = "gpio_slp"; - function = "pin_fun3"; - }; - }; - - regulators { - vdd_logic: DCDC_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-init-microvolt = <900000>; - regulator-ramp-delay = <6001>; - regulator-initial-mode = <0x2>; - regulator-name = "vdd_logic"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: DCDC_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-init-microvolt = <900000>; - regulator-ramp-delay = <6001>; - regulator-initial-mode = <0x2>; - regulator-name = "vdd_gpu"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - regulator-name = "vcc_ddr"; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vdd_npu: DCDC_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-init-microvolt = <900000>; - regulator-ramp-delay = <6001>; - regulator-initial-mode = <0x2>; - regulator-name = "vdd_npu"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda0v9_image: LDO_REG1 { - regulator-boot-on; - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-name = "vdda0v9_image"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda_0v9: LDO_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-name = "vdda_0v9"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda0v9_pmu: LDO_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-name = "vdda0v9_pmu"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vccio_acodec: LDO_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vccio_acodec"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vccio_sd"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_pmu: LDO_REG6 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc3v3_pmu"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcca_1v8: LDO_REG7 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcca_1v8"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcca1v8_pmu: LDO_REG8 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcca1v8_pmu"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcca1v8_image: LDO_REG9 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcca1v8_image"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG5 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc_1v8"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v3: SWITCH_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc_3v3"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_sd: SWITCH_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc3v3_sd"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - - rk809_codec: codec { - #sound-dai-cells = <1>; - compatible = "rockchip,rk809-codec", "rockchip,rk817-codec"; - clocks = <&cru I2S1_MCLKOUT>; - clock-names = "mclk"; - assigned-clocks = <&cru I2S1_MCLKOUT>, <&cru I2S1_MCLK_TX_IOE>; - assigned-clock-rates = <12288000>; - assigned-clock-parents = <&cru I2S1_MCLKOUT_TX>, <&cru I2S1_MCLKOUT_TX>; - pinctrl-names = "default"; - pinctrl-0 = <&i2s1m0_mclk>; - hp-volume = <20>; - spk-volume = <3>; - mic-in-differential; - status = "okay"; - }; - }; -}; - -&uart1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>; -}; - -&pwm7 { - status = "okay"; -}; - -&i2s0_8ch { - status = "okay"; -}; - -&i2s1_8ch { - status = "okay"; - rockchip,clk-trcm = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&i2s1m0_sclktx - &i2s1m0_lrcktx - &i2s1m0_sdi0 - &i2s1m0_sdo0>; -}; - -&iep { - status = "okay"; -}; - -&iep_mmu { - status = "okay"; -}; - -&jpegd { - status = "okay"; -}; - -&jpegd_mmu { - status = "okay"; -}; - -&mpp_srv { - status = "okay"; -}; - -&pinctrl { - wireless-bluetooth { - uart1_gpios: uart1-gpios { - rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sd { - sdmmc0_pwr_h: sdmmc0-pwr-h { - rockchip,pins = - <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - mxc6655xa { - mxc6655xa_irq_gpio: mxc6655xa_irq_gpio { - rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int: pmic_int { - rockchip,pins = - <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - soc_slppin_gpio: soc_slppin_gpio { - rockchip,pins = - <0 RK_PA2 RK_FUNC_GPIO &pcfg_output_low>; - }; - - soc_slppin_slp: soc_slppin_slp { - rockchip,pins = - <0 RK_PA2 1 &pcfg_pull_none>; - }; - - soc_slppin_rst: soc_slppin_rst { - rockchip,pins = - <0 RK_PA2 2 &pcfg_pull_none>; - }; - }; - - touch { - touch_gpio: touch-gpio { - rockchip,pins = - <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>, - <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sdio-pwrseq { - wifi_enable_h: wifi-enable-h { - rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb { - vcc5v0_host_en: vcc5v0-host-en { - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - vcc5v0_otg_en: vcc5v0-otg-en { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - wireless-bluetooth { - uart8_gpios: uart8-gpios { - rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - work-led { - leds_gpio: leds-gpio { - rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - headphone { - hp_det: hp-det { - rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - pcie { - pcie_drv: pcie-drv { - rockchip,pins = - <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - edp { - edp_hpd: edp-hpd { - rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bl_en: bl-en { - rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_output_high>; - }; - }; -}; - - /* - * There are 10 independent IO domains in RK3566/RK3568, including PMUIO[0:2] and VCCIO[1:7]. - * 1/ PMUIO0 and PMUIO1 are fixed-level power domains which cannot be configured; - * 2/ PMUIO2 and VCCIO1,VCCIO[3:7] domains require that their hardware power supply voltages - * must be consistent with the software configuration correspondingly - * a/ When the hardware IO level is connected to 1.8V, the software voltage configuration - * should also be configured to 1.8V accordingly; - * b/ When the hardware IO level is connected to 3.3V, the software voltage configuration - * should also be configured to 3.3V accordingly; - * 3/ VCCIO2 voltage control selection (0xFDC20140) - * BIT[0]: 0x0: from GPIO_0A7 (default) - * BIT[0]: 0x1: from GRF - * Default is determined by Pin FLASH_VOL_SEL/GPIO0_A7: - * L:VCCIO2 must supply 3.3V - * H:VCCIO2 must supply 1.8V - */ - -&pmu_io_domains { - status = "okay"; - pmuio1-supply = <&vcc3v3_pmu>; - pmuio2-supply = <&vcc3v3_pmu>; - vccio1-supply = <&vcc_3v3>; - vccio2-supply = <&vcc_1v8>; - vccio3-supply = <&vccio_sd>; - vccio4-supply = <&vcc_1v8>; - vccio5-supply = <&vcc_3v3>; - vccio6-supply = <&vcc_3v3>; - vccio7-supply = <&vcc_3v3>; -}; - -&rk_rga { - status = "okay"; -}; - -&rkvdec { - status = "okay"; -}; - -&rkvdec_mmu { - status = "okay"; -}; - -&rkvenc { - venc-supply = <&vdd_logic>; - status = "okay"; -}; - -&rkvenc_mmu { - status = "okay"; -}; - -&rknpu { - rknpu-supply = <&vdd_npu>; - status = "okay"; -}; - -&rknpu_mmu { - status = "okay"; -}; - -&route_hdmi { - status = "disabled"; - connect = <&vp0_out_hdmi>; -}; - -&saradc { - status = "okay"; - vref-supply = <&vcca_1v8>; -}; - -&sdhci { - bus-width = <8>; - no-sdio; - no-sd; - non-removable; - max-frequency = <200000000>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; - status = "okay"; -}; - -&sdmmc0 { - max-frequency = <150000000>; - no-sdio; - no-mmc; - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - disable-wp; - sd-uhs-sdr104; - vmmc-supply = <&vcc_sd>; - vqmmc-supply = <&vccio_sd>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; - status = "okay"; -}; - -&sfc { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&fspi_pins>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <100000000>; - spi-rx-bus-width = <4>; - spi-tx-bus-width = <1>; - }; -}; - -&tsadc { - status = "okay"; -}; - -&u2phy0_host { - phy-supply = <&vbus>; - status = "okay"; -}; - -&u2phy0_otg { - status = "okay"; -}; - -&u2phy1_host { - status = "okay"; -}; - -&u2phy1_otg { - status = "okay"; -}; - -&usb2phy0 { - status = "okay"; -}; - -&usb2phy1 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usbdrd_dwc3 { - dr_mode = "host"; - extcon = <&usb2phy0>; - status = "okay"; -}; - -&usbdrd30 { - status = "okay"; -}; - -&usbhost_dwc3 { - status = "okay"; -}; - -&usbhost30 { - status = "okay"; -}; - -&vdpu { - status = "okay"; -}; - -&vdpu_mmu { - status = "okay"; -}; - -&vepu { - status = "okay"; -}; - -&vepu_mmu { - status = "okay"; -}; - -&vop { - status = "okay"; - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; -}; - -&vop_mmu { - status = "okay"; -}; - -&mdio1 { - rgmii_phy0: phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0x0>; - }; -}; - -&gmac1 { - phy-mode = "rgmii"; - clock_in_out = "input"; - - snps,reset-gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - /* Reset time is 20ms, 100ms for rtl8211f */ - //snps,reset-delays-us = <0 20000 100000>; - snps,reset-delays-us = <0 50000 200000>; - - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; - assigned-clock-rates = <0>, <125000000>; - - pinctrl-names = "default"; - pinctrl-0 = <&gmac1m0_miim - &gmac1m0_tx_bus2 - &gmac1m0_rx_bus2 - &gmac1m0_rgmii_clk - &gmac1m0_clkinout - &gmac1m0_rgmii_bus>; - - tx_delay = <0x30>; - rx_delay = <0x10>; - - phy-handle = <&rgmii_phy0>; - status = "okay"; -}; - -&sdmmc1 { - max-frequency = <150000000>; - no-sd; - no-mmc; - bus-width = <4>; - disable-wp; - cap-sd-highspeed; - cap-sdio-irq; - keep-power-in-suspend; - mmc-pwrseq = <&sdio_pwrseq>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; - sd-uhs-sdr104; - status = "okay"; -}; - -&combphy1_usq { - status = "okay"; -}; - -&combphy2_psq { - status = "okay"; -}; - -&pcie2x1 { - reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_pcie>; - status = "okay"; -}; - -&vp0 { - rockchip,plane-mask = <(1 << ROCKCHIP_VOP2_CLUSTER0 | 1 << ROCKCHIP_VOP2_ESMART0 | 1 << - ROCKCHIP_VOP2_SMART0 | 1 << ROCKCHIP_VOP2_CLUSTER1 | 1 << ROCKCHIP_VOP2_ESMART1 | 1 << - ROCKCHIP_VOP2_SMART1)>; - rockchip,primary-plane = ; -}; - -&i2c1 { - status = "okay"; - - ov5647: ov5647@36 { - status = "disabled"; - compatible = "ovti,ov5647"; - reg = <0x36>; - clocks = <&ext_cam_ov5647_clk>; - clock-names = "ext_cam_ov5647_clk"; - pwdn-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; - rockchip,camera-module-index = <0>; - rockchip,camera-module-facing = "back"; - rockchip,camera-module-name = "LMM248"; - rockchip,camera-module-lens-name = "YXC-M804A2"; - port { - ov5647_out: endpoint { - remote-endpoint = <&dphy1_in>; - data-lanes = <1 2>; - }; - }; - }; - - raspits_panel: raspits-panel@45 { - status = "disabled"; - compatible = "raspberrypi,7inch-touchscreen-panel"; - reg = <0x45>; - - port { - panel_in_dsi1: endpoint { - remote-endpoint = <&dsi1_out_panel>; - }; - }; - }; - - raspits_touch_ft5426: raspits-touch-ft5426@38 { - status = "disabled"; - compatible = "raspits_ft5426"; - reg = <0x38>; - }; -}; - -&csi2_dphy_hw { - status = "disabled"; -}; - -&csi2_dphy0 { - status = "disabled"; -}; - -&csi2_dphy1 { - status = "disabled"; - /* - * dphy1 only used for split mode, - * can be used concurrently with dphy2 - * full mode and split mode are mutually exclusive - */ - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - dphy1_in: endpoint@1 { - reg = <1>; - remote-endpoint = <&ov5647_out>; - data-lanes = <1 2>; - }; - }; - - port@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - dphy1_out: endpoint@1 { - reg = <1>; - remote-endpoint = <&isp0_in>; - }; - }; - }; -}; - -&rkisp { - status = "disabled"; -}; - -&rkisp_mmu { - status = "disabled"; -}; - -&rkisp_vir0 { - status = "disabled"; - port { - #address-cells = <1>; - #size-cells = <0>; - - isp0_in: endpoint@0 { - reg = <0>; - remote-endpoint = <&dphy1_out>; - }; - }; -}; - -&edp { - status = "disabled"; - force-hpd; - hpd-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&edp_hpd &bl_en>; - - ports { - port@1 { - reg = <1>; - - edp_out_panel: endpoint { - remote-endpoint = <&panel_in_edp>; - }; - }; - }; -}; - -&edp_phy { - status = "disabled"; -}; - -&route_edp { - status = "disabled"; -}; - -&pwm2 { - status = "disabled"; -}; - -&dsi1 { - status = "disabled"; - - ports { - port@1 { - reg = <1>; - - dsi1_out_panel: endpoint { - remote-endpoint = <&panel_in_dsi1>; - }; - }; - }; -}; +#include