rtest

#!/usr/bin/perl -w
use Cwd;
use File::Temp qw/ tempfile /;

delete($ENV{'OPENMODELICALIBRARY'});
if (defined $ENV{"RTEST_OMCFLAGS"}) {
    $omcflags=$ENV{"RTEST_OMCFLAGS"};
} else {
    $omcflags="";
}

(undef,$testTempFile) = tempfile("rtest$$.XXXXX", TMPDIR => 1, SUFFIX => ".tmp", UNLINK => 1);
$cwd = getcwd;
if ($cwd =~ m/(.*)testsuite\/(.+)$/) {
  $OPENMODELICAHOME="$1build";
  $dirname=$2;
  $ENV{'OPENMODELICAHOME'} = $OPENMODELICAHOME;
  $ENV{'REFERENCEFILES'} = "$1testsuite/ReferenceFiles";
  $ENV{'OMLIBRARYCOMMON'} = "$1testsuite/simulation/libraries/common";
  $ENV{'OMCOMPILERSOURCES'} = "$1OMCompiler/Compiler";
} else {
  print "You must run rtest from the testsuite (was run from $cwd)\n";
  exit 0;
}

system "$OPENMODELICAHOME/bin/omc-diff -v1.4";
if ($?) {
  print "$OPENMODELICAHOME/bin/omc-diff seems to be missing or of an incompatible version.";
  print "Compile omc-diff and run rtest again.";
  exit 2;
}

# Windows (MinGW) prints 3 digits exponent ( vs *nix 2) by default
# and perl prints them as mismatches if there are other actual mismatches.
# makes actual testsuite mismatches harder to find
# print only 2 exponent digits
$ENV{'PRINTF_EXPONENT_DIGITS'} = 2;

$successes=0;
$total=0;
$setbaseline=0;
$verbose="yes";
$returnwitherror=0;
$pager="cat";
$diffcmd="diff -U 5 -w";
$dwdiffcmd="dwdiff '-d()' -l -C 3 -c -L";
$log="";
$tmpdir = "/tmp/omc-rtest-".(getpwuid($<)||getlogin()||"unknown")."/$dirname";
$tmpdir =~ s/\s/_/g;
system "mkdir -p $tmpdir";
$got = "$tmpdir/equations-got";
$expected = "$tmpdir/equations-expected";
$difference = "$tmpdir/equations-diff";
$baseline = "$tmpdir/baseline";
@keys = ();
$collectkeys = 0;
$collectcases = 0;
%knownkeys = ();
$filearg = 0;
$status = 0;
$statusfilter = "all";
$eps_mo = 1.0e-7;
$eps_mos = 5e-3;
$set_modelica_lib = 1;
$nodelete = 0;
$OMCEXE = "omc";

sub ulimit_cmd
{
  my $stack_size = shift;
  if ($ENV{'OMDEV'}) {
    return "";
  }
  if ($stack_size eq "") {
    return "";
  }
  return "ulimit -s $stack_size ; ";
}

# Creates a baseline, i.e. the stores the actual result as the expected result
sub setbaselineone
{
    my $mismatch = 0;
    my ($f,%info) = @_;
    my $setup_command = $info{"setup_command"};
    my $cflags = $info{"cflags"};
    my $env = $info{"env"};
    my $teardown_command = $info{"teardown_command"};
    my $stack_size = $info{"stack_size"};
    my $ulimit = ulimit_cmd($stack_size);

    $log = "$tmpdir/log-$f";
    system "rm -f $log";
    if ($setup_command) {
      if ( system "$setup_command" ) {
        print "== Failed to set baseline for $f (system $setup_command failed)";
        return 1;
      }
    }
    if (!$cflags) {
      $cflags = "";
    }
    if (!$env) {
      $env = "";
    }
    if ($ENV{'OMDEV'}) {
      $env =~ s/:/\\;/g;
    }
    unlink "$testTempFile$f";
    system "$env $ulimit $OPENMODELICAHOME/bin/$OMCEXE --running-testsuite=$testTempFile$f +locale=C $omcflags $cflags $f >>$log 2>&1";
    if ($nodelete == 0 && open(TOREMOVE,"<$testTempFile$f")) {
      while(my $line = <TOREMOVE>) {
        $line =~ s/^\s*(.*?)\s*$/$1/;
        unlink $line;
      }
    }
    unlink "$testTempFile$f";
    if ($teardown_command) {
      system $teardown_command;
    }

    open(RES,">$baseline");
    open(LOG,"<$log");
    open(SRC,"<$f");

    while(<SRC>) {
      if (/^\/\/ Result:/../^\/\/ endResult/) {

      } else {
        my $x = $_;
        $x =~ s/^ *\/\/ *Result:/\/\/ Result:/;
        print RES "$x";
      }
    }
    print RES "// Result:\n";
    while(<LOG>) {
      my $x = $_;
      if ($x ne "\n") {
        print RES "// $x";
      } else {
        print RES "//\n";
      }
    }
    print RES "// endResult\n";
    close RES;
    close LOG;
    close SRC;
    print "Set baseline for ";print $f;print "\n";

    open(SRC,"<$baseline");
    open(DST,">$f");
    # write in bin-mode to force LF instead of CRLF on windows!
    binmode(DST);

    while(<SRC>) {
      $_ =~ s/[\n\r]$//g;
      print DST "$_\x{0A}";
    }
    close DST;

    return 0;
}

sub runone
{
    my $retval = 0;
    my $mismatch = 0;
    my ($f,%info) = @_;
    my $setup_command = $info{"setup_command"};
    my $cflags = $info{"cflags"};
    my $env = $info{"env"};
    my $teardown_command = $info{"teardown_command"};
    my $stack_size = $info{"stack_size"};
    my $ulimit = ulimit_cmd($stack_size);
    my $start_t = time;

    $log = "$tmpdir/log-$f";
    system "rm -f $log";
    if ($setup_command) {
      if ( system "$setup_command >>$log 2>&1" ) {
        print " setup_command failed";
        return 1;
      }
    }
    if (!$cflags) {
      $cflags = "";
    }
    if (!$env) {
      $env = "";
    }
    if ($ENV{'OMDEV'}) {
      $env =~ s/:/\\;/g;
    }
    unlink "$testTempFile$f";
    system "$env $ulimit $OPENMODELICAHOME/bin/$OMCEXE --running-testsuite=$testTempFile$f +locale=C $omcflags $cflags $f >>$log 2>&1";
    $retval = $?;
    if ($nodelete==0 && open(TOREMOVE,"<$testTempFile$f")) {
      while(my $line = <TOREMOVE>) {
        $line =~ s/^\s*(.*?)\s*$/$1/;
        unlink $line;
      }
    }
    unlink "$testTempFile$f";
    if ($teardown_command) {
      system "$teardown_command >>$log 2>&1";
    }
    my $end_t = time-$start_t;

    if ($info{"status"} eq "erroneous") {
      print "erroneous\n";
      return 0;
    }

    if ( $retval != 0 ) {
        if ($info{"status"} eq "correct") {
            print "execution failed\n";
            return 1;
        }
    } elsif ($info{"status"} ne "correct") {
        print "this test should have failed\n";
        return 1;
    }

    # Extract the result
    open(RES,">$got");
    open(LOG,"<$log");
    while(<LOG>) {
      s/^[ \t]*//;
      s/[ \t]+/ /;
      print RES $_;
    }
    close LOG;
    close RES;

    # Compare
    my $epsilon;
    if ($f =~ /mos$/) {
      $epsilon = $eps_mos;
    } else {
      $epsilon = $eps_mo;
    }
    system "$OPENMODELICAHOME/bin/omc-diff $epsilon $expected $got > $difference";

    if ( $? != 0 ) {
    print "equation mismatch [time:$end_t]\n";
    ## make a newline
    system "echo '' >> $log";
    system "echo Equation mismatch: diff says: >> $log";
    system "$diffcmd $expected $got >> $log";

    ## make a newline
    system "echo '' >> $log";
    system "echo Equation mismatch: omc-diff says: >> $log";
    system "cat $difference >> $log";
    return 1;
    }

    print "ok [time:$end_t]\n";
    return 0;
}

sub dofile
{
    my $f = shift;
    my %info = ("status"   => "unknown",
        "name"     => $f,
        "keywords" => "unknown",
        "setup_command" => "",
        "cflags" => "",
        "env" => "",
        "teardown_command" => "",
        "stack_size" => "");
    $log = "$tmpdir/log-$f";
    $tc_err = 1;
    # Find the expected result
    open(OUT,">$expected");
    open(IN,"<$f");
    while(<IN>) {
    # @adrpo - uncomment for debugging
    # print ($_);
    if (/^\/\/ Result:/../^\/\/ endResult/) {
        s/^[ \t]*//;
        s/^\/\/ Result://;
        s/^\/\/ endResult//;
        s/[ \t]+/ /;
        if (/^\/\/ /) {
          print OUT substr($_,3);
        } elsif (/^\/\/$/) {
          print OUT substr($_,2);
        } elsif ($tc_err == 0)  {
            print "Error in testcase: $f\n";
            $tc_err = 1;
        }
    } elsif (/^\/\/[ \\|]*([a-z_]*):[ \\|]*([^\012\015\n\r]*)/) {
        # @adrpo - uncomment for debugging
        # print "Noticed: $1 = $2\n";
        # $info{$1} = $value;
        if($1 ne "env" or $set_modelica_lib) {
          $info{$1} = $2;
        }
    }
    }
    close IN;
    close OUT;

    # Check for keyword match
    if ($#keys >=0) {
    my %ks;
    for (split(/ *, */,$info{"keywords"})) { $ks{$_} = 1; }
    for (@keys) {
        if (! $ks{$_}) {
        return 0;
        }
    }
    }

    # Check for status match
     if ($statusfilter ne "all") {
     if ($info{"status"} ne $statusfilter) {
         return 0;
     }
     }

    # Collecting files
    if ($collectcases) {
    if ($info{'status'} ne "unknown") {
        print $info{'name'}."\n";
    }
    return 0;
    }

    # Collecting keys?
    if ($collectkeys) {
    if ($info{"keywords"}) {
        for (split(/ *, */, $info{"keywords"})) {
        if (!$knownkeys{$_}) {
            $knownkeys{$_} = 1;
        } else {
            $knownkeys{$_} += 1;
        }
        }
    }
    return 0;
    }

    if (!$setbaseline) {
      printf(" %s %-82s... ",
         $info{'status'} eq 'correct'?'+':'-', $info{'name'});
    }
    $total = $total + 1;

    if ( $info{"status"} !~ /^(erroneous|(in|)correct)$/ ) {
    print "unknown testcase status\n";
    return 1;
    }

    if ($setbaseline) {
      setbaselineone $f,%info;
      $status = 0;
    } else {
      $status = runone $f,%info;
    }

    if ($status == 0) {
      $successes = $successes + 1;
    } else {
    if ($verbose eq "yes" ) {
      print "\n";
      print "==== Log $log\n";
      system "$pager $log";
    }
    }
}

$start_t = time;
while ($#ARGV >= 0) {
    $arg = shift(@ARGV);

    # $setbaseline = 1;

    if ($arg =~ m/^\+/) {
      $omcflags .= " $arg";
    } elsif ($arg =~ m"^--with-omc=(.*)$") {
      $OMCEXE="$1";
    } elsif ($arg eq "--return-with-error-code") {
      $returnwitherror=1;
    } elsif ($arg eq "-v") {
      $verbose="yes";
    } elsif ($arg eq "-b") {
      $setbaseline = 1;
    } elsif ($arg eq "-c") {
      $diffcmd = $dwdiffcmd
    } elsif ($arg eq "-nodelete") {
      $nodelete = 1;
    } elsif ($arg eq "-p") {
      if ($ENV{"PAGER"} eq "") {
        $pager="more";
      } else {
        $pager=$ENV{"PAGER"};
      }
    } elsif ($arg eq "-k") {
      if ($#ARGV < 0) {
        print "-m needs an argument\n";
        exit 1;
      }
      @keys = split(/,/,shift(@ARGV));
    } elsif ($arg eq "-s") {
      if ($#ARGV < 0) {
        print "-s needs an argument\n";
        exit 1;
      }
      $statusfilter = shift;
    } elsif ($arg eq "-l") {
      $collectkeys = 1;
    } elsif ($arg eq "-L") {
      $collectcases = 1;
    } elsif ($arg eq "-nolib") {
      $set_modelica_lib = 0;
    } else {
      $filearg = 1;
      dofile $arg;
    }
}
$end_t = time-$start_t;

##################################################################
## Sub Name: isNumber
## Description: returns 1 if is an integer or a real, else 0
## @author adrpo
##################################################################
sub isNumber
{
    eval
    {
        local $SIG{__WARN__} = sub { die };

        scalar ($_[0] == $_[0]);
    };

    !$@;
}

#@author adrpo
sub trim($)
{
    my $string = shift;
    $string =~ s/^\s+//;
    $string =~ s/\s+$//;
    return $string;
}


##################################################################
## Sub Name: LessThanEpsilon.
## Description: This sub check if $1 - $2 < $3
## @author adrpo
##################################################################
sub LessThanEpsilon
{
    my $e       = shift;
    my $g       = shift;
    my $epsilon = shift;

    if (abs($e - $g) < $epsilon)
    {
            return 1;
    }
    else
    {
            return 0;
    }
}

# Check for no file args
# adrpo: 2013-11-13 DO NOT RUN ALL MOS IF NO FILES ARE GIVEN!
if ($filearg == 0) {
#   for (glob '*.mos ') { dofile $_; }
    print "No test files given at command line!\n";
    exit 0;
}

# Final output. Statistics and stuff
if ($collectkeys || $collectcases) {
    for (sort(keys %knownkeys)) {
    printf "  %3d %s\n", $knownkeys{$_}, $_;
    }
} elsif ($setbaseline) {
  printf "\n== set new baseline for %d tests\n",$total;
} else {
    printf "\n== %d out of %d tests failed [%s, time: %d]\n", $total-$successes, $total, $dirname, $end_t;
}

if ($returnwitherror && $total!=$successes) {
  exit 1;
}