You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
i compiled a binary using TasmoCompiler.
ESP32 S3 and LVGL was checked
The hardware runs on precompiled Tasmota32-S3(qio/opi) before, was flashed via online "Install Tasmota) and worked fine.
The custom build was uploaded/flashed via WebGui.
But then no LVGL and PSRAM are available.
Console Output:
'''
00:00:00.253 CMD: Fall back to serial port, no SOF packet detected on USB port
00:00:00.253 HDW: ESP32-S3 v0.2
00:00:00.303 UFS: FlashFS mounted with 12536 kB free
00:00:00.315 CFG: Loaded from File, Anzahl 179
00:00:00.323 QPC: Count 1
00:00:00.327 SPI: Bus1 using GPIO12(CLK), GPIO11(MOSI) and GPIO13(MISO)
00:00:00.329 I2C: Bus1 using GPIO20(SCL) and GPIO19(SDA)
00:00:00.989 BRY: Berry initialized, RAM used 4717 bytes
00:00:00.015 I2C: GT911 found at 0x5d
00:00:00.134 UTI: GT911 initialized
00:00:00.146 Projekt tasmota - TasmotaSunton4.3 Version 14.3.0(TasmoCompiler-esp32s3)-3_1_0(2024.10.31 02:49:19)
00:00:00.182 TAP: Loaded Tasmota App 'DisplayCalibrate(1).tapp'
00:00:01.022 autoexec.be
00:00:01.022 BRY: Successfully loaded 'autoexec.be'
00:00:02.001 WIF: verb...................ls TasmotaSunton5zoll...
00:00:03.795 WIF: verbunden
00:00:04.053 HTP: Webserver aktiv bei TasmotaS.......................
03:55:17.047 RSL: INFO1 = {"Info1":{"Module":"SUNTON","Version":"14.3.0(TasmoCompiler-esp32s3)","FallbackTopic":"cmnd/DVES_5724AC_fb/","GroupTopic":"cmnd/tasmotas/"}}
03:55:17.062 RSL: INFO2 = {"Info2":{"WebServerMode":"Admin","Ho................"}}
03:55:17.075 RSL: INFO3 = {"Info3":{"RestartReason":"Vbat power on reset","BootCount":155}}
03:55:17.078 RSL: RESULT = {"POWER":"ON"}
03:55:17.090 RSL: POWER = ON
03:55:19.676 QPC: Reset
03:55:21.722 RSL: STATE = {"Time":"2024-10-31T03:55:21","Uptime":"0T00:00:10","UptimeSec":10,"Heap":218,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":22,"MqttCount":0,"Berry":{"HeapUsed":5,"Objects":64},"POWER":"ON","Wifi":{"AP":1,"..............","Channel":1,"Mode":"HT40","RSSI":76,"Signal":-62,"LinkCount":1,"Downtime":"0T00:00:04"}}
'''
i compiled a binary using TasmoCompiler.
ESP32 S3 and LVGL was checked
The hardware runs on precompiled Tasmota32-S3(qio/opi) before, was flashed via online "Install Tasmota) and worked fine.
The custom build was uploaded/flashed via WebGui.
But then no LVGL and PSRAM are available.
Console Output:
'''
00:00:00.253 CMD: Fall back to serial port, no SOF packet detected on USB port
00:00:00.253 HDW: ESP32-S3 v0.2
00:00:00.303 UFS: FlashFS mounted with 12536 kB free
00:00:00.315 CFG: Loaded from File, Anzahl 179
00:00:00.323 QPC: Count 1
00:00:00.327 SPI: Bus1 using GPIO12(CLK), GPIO11(MOSI) and GPIO13(MISO)
00:00:00.329 I2C: Bus1 using GPIO20(SCL) and GPIO19(SDA)
00:00:00.989 BRY: Berry initialized, RAM used 4717 bytes
00:00:00.015 I2C: GT911 found at 0x5d
00:00:00.134 UTI: GT911 initialized
00:00:00.146 Projekt tasmota - TasmotaSunton4.3 Version 14.3.0(TasmoCompiler-esp32s3)-3_1_0(2024.10.31 02:49:19)
00:00:00.182 TAP: Loaded Tasmota App 'DisplayCalibrate(1).tapp'
00:00:01.022 autoexec.be
00:00:01.022 BRY: Successfully loaded 'autoexec.be'
00:00:02.001 WIF: verb...................ls TasmotaSunton5zoll...
00:00:03.795 WIF: verbunden
00:00:04.053 HTP: Webserver aktiv bei TasmotaS.......................
03:55:17.047 RSL: INFO1 = {"Info1":{"Module":"SUNTON","Version":"14.3.0(TasmoCompiler-esp32s3)","FallbackTopic":"cmnd/DVES_5724AC_fb/","GroupTopic":"cmnd/tasmotas/"}}
03:55:17.062 RSL: INFO2 = {"Info2":{"WebServerMode":"Admin","Ho................"}}
03:55:17.075 RSL: INFO3 = {"Info3":{"RestartReason":"Vbat power on reset","BootCount":155}}
03:55:17.078 RSL: RESULT = {"POWER":"ON"}
03:55:17.090 RSL: POWER = ON
03:55:19.676 QPC: Reset
03:55:21.722 RSL: STATE = {"Time":"2024-10-31T03:55:21","Uptime":"0T00:00:10","UptimeSec":10,"Heap":218,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":22,"MqttCount":0,"Berry":{"HeapUsed":5,"Objects":64},"POWER":"ON","Wifi":{"AP":1,"..............","Channel":1,"Mode":"HT40","RSSI":76,"Signal":-62,"LinkCount":1,"Downtime":"0T00:00:04"}}
'''
generated
user_config_override.h
:what do wrong?
The text was updated successfully, but these errors were encountered: