No water_level in Attributes for AC3829/50 model

[allmoney]

I have AC3829 and AC2729 models.

AC2729/50 has water_level:

AC3829/50 not:

Can you fix it?

[tebra-jl]

Same problem at my side. Water level attribute stays at 100 all the time.
model_id: AC2729/10
software_version: 0.2.1
wifi_version: [email protected]
Philips AirPurifier (with CoAP) HACS: 0.7.0

[allmoney]

Same problem at my side. Water level attribute stays at 100 all the time.
model_id: AC2729/10
software_version: 0.2.1
wifi_version: [email protected]
Philips AirPurifier (with CoAP) HACS: 0.7.0

I tested models AC2729/50 - it has only 2 values: 0 and 100. I think it's not a bug.
The bug only that in AC3829/50 no attribute water_level (as I described in 1st message).

[tebra-jl]

Same problem at my side. Water level attribute stays at 100 all the time.
model_id: AC2729/10
software_version: 0.2.1
wifi_version: [email protected]
Philips AirPurifier (with CoAP) HACS: 0.7.0

I tested models AC2729/50 - it has only 2 values: 0 and 100. I think it's not a bug.
The bug only that in AC3829/50 no attribute water_level (as I described in 1st message).

Maybe it is a different issue but with AC2729/10 water_level stay at 100 even when the tank is empty.

[kongo09]

As @betaboon is not active on the air purifier anymore, I've done a rewrite here: I've fixed this in my rewrite: https://github.com/kongo09/philips-airpurifier-coap

The new code looks at the response of the device and shows the water level as a sensor if the data field is part of the response. I have a 2729 myself and it shows 0 right now as the tank is empty. I feel, this is working. For AC3829 the sensor should be present, provided there is data in the response. Please try and let me know.

[tebra-jl]

@kongo09 Thanks, I will try your new version of this integration and let you know.