Makefile

# Main Makefile

# Define TOPDIR from shell command and _not_ $(PWD) because that gives
# pwd before changing to a 'make -C <dir>' <dir>:
export TOPDIR = $(shell pwd)

REC_TARGETS=build domserver install-domserver judgehost install-judgehost \
            docs install-docs inplace-install inplace-uninstall

# Global Makefile definitions
include $(TOPDIR)/Makefile.global

default:
	@echo "No default target"
	@echo
	@echo "Try:"
	@echo " - make all         (all targets below)"
	@echo " - make build       (all except 'docs')"
	@echo " - make domserver"
	@echo " - make judgehost"
	@echo " - make docs"
	@echo or
	@echo " - make install-domserver"
	@echo " - make install-judgehost"
	@echo " - make install-docs"
	@echo or
	@echo " - make clean"
	@echo " - make distclean"
	@exit 1

install:
	@echo "Try:"
	@echo " - make install-domserver"
	@echo " - make install-judgehost"
	@echo " - make install-docs"
	@exit 1

all: build
build: domserver judgehost

ifeq ($(BUILD_DOCS),yes)
all: docs
dist: distdocs
endif

# MAIN TARGETS
domserver: domserver-configure paths.mk config
judgehost: judgehost-configure paths.mk config
docs: paths.mk config
install-domserver: domserver domserver-create-dirs
install-judgehost: judgehost judgehost-create-dirs
install-docs: docs-create-dirs
dist: configure composer-dependencies

domserver-configure:
ifneq "$(DOMSERVER_BUILD_ENABLED)" "yes"
	@echo "The setup for domserver is not configured"
	@exit 1
endif

judgehost-configure:
ifneq "$(JUDGEHOST_BUILD_ENABLED)" "yes"
	@echo "The setup for judgehost is not configured"
	@exit 1
endif

# Install PHP dependencies
composer-dependencies:
ifeq (, $(shell command -v composer 2> /dev/null))
	$(error "'composer' command not found in $(PATH), install it via your package manager or https://getcomposer.org/download/")
endif
# We use --no-scripts here because at this point the autoload.php file is
# not generated yet, which is needed to run the post-install scripts.
	composer $(subst 1,-q,$(QUIET)) install --prefer-dist -o -a --no-scripts --no-plugins

composer-dependencies-dev:
	composer $(subst 1,-q,$(QUIET)) install --prefer-dist --no-scripts --no-plugins

composer-dump-autoload-dev:
	composer $(subst 1,-q,$(QUIET)) dump-autoload

# Generate documentation for distribution. Remove this dependency from
# dist above for quicker building from git sources.
distdocs:
	$(MAKE) -C doc distdocs

# Generate configuration files from configure settings:
config:
	$(MAKE) -C etc config

# Special rule to build any compile/run/compare scripts. This is
# useful for testing, e.g. when submitting a Coverity scan.
build-scripts:
	$(MAKE) -C sql build-scripts

# List of SUBDIRS for recursive targets:
build:             SUBDIRS=        lib           misc-tools
domserver:         SUBDIRS=etc     lib sql       misc-tools webapp
install-domserver: SUBDIRS=etc     lib sql       misc-tools webapp example_problems
judgehost:         SUBDIRS=etc             judge misc-tools
install-judgehost: SUBDIRS=etc     lib     judge misc-tools
docs:              SUBDIRS=    doc
install-docs:      SUBDIRS=    doc
inplace-install:   SUBDIRS=    doc               misc-tools
inplace-uninstall: SUBDIRS=    doc               misc-tools
dist:              SUBDIRS=        lib sql       misc-tools
clean:             SUBDIRS=etc doc lib sql judge misc-tools webapp
distclean:         SUBDIRS=etc doc lib sql judge misc-tools webapp
maintainer-clean:  SUBDIRS=etc doc lib sql judge misc-tools webapp

domserver-create-dirs:
	$(INSTALL_DIR) $(addprefix $(DESTDIR),$(domserver_dirs))

judgehost-create-dirs:
	$(INSTALL_DIR) $(addprefix $(DESTDIR),$(judgehost_dirs))

docs-create-dirs:
	$(INSTALL_DIR) $(addprefix $(DESTDIR),$(docs_dirs))

install-docs-l:
	$(INSTALL_DATA) -t $(DESTDIR)$(domjudge_docdir) README.md ChangeLog COPYING*

# As final step try set ownership and permissions of a few special
# files/directories. Print a warning and fail gracefully if this
# doesn't work because we're not root.
install-domserver-l:
	$(MAKE) check-root
# Fix permissions for special directories:
	-$(INSTALL_USER)    -m 0700 -d $(DESTDIR)$(domserver_logdir)
	-$(INSTALL_USER)    -m 0700 -d $(DESTDIR)$(domserver_rundir)
	-for d in cache log ; do \
		$(INSTALL_WEBSITE) -m 0775 -d $(DESTDIR)$(domserver_webappdir)/var/$$d ; \
	done
# Make sure that domjudge user and webserver group can write to var/{cache,log}:
	-DESTDIR=$(DESTDIR) $(DESTDIR)$(domserver_bindir)/fix_permissions
# Special case create tmpdir here, only when FHS not enabled:
ifneq "$(FHS_ENABLED)" "yes"
	-$(INSTALL_WEBSITE) -m 0770 -d $(DESTDIR)$(domserver_tmpdir)
endif
# Fix permissions and ownership for password files:
	-$(INSTALL_USER) -m 0600 -t $(DESTDIR)$(domserver_etcdir) \
		etc/restapi.secret
	-$(INSTALL_USER) -m 0600 -t $(DESTDIR)$(domserver_etcdir) \
		etc/initial_admin_password.secret
	-$(INSTALL_WEBSITE) -m 0640 -t $(DESTDIR)$(domserver_etcdir) \
		etc/dbpasswords.secret etc/symfony_app.secret
	@echo ""
	@echo "Domserver install complete. Admin web interface password can be found in:"
	@echo "$(DESTDIR)$(domserver_etcdir)/initial_admin_password.secret"

install-judgehost-l:
	$(MAKE) check-root
# Fix permissions for special directories:
	-$(INSTALL_USER) -m 0700 -d $(DESTDIR)$(judgehost_logdir)
	-$(INSTALL_USER) -m 0700 -d $(DESTDIR)$(judgehost_rundir)
	-$(INSTALL_USER) -m 0711 -d $(DESTDIR)$(judgehost_judgedir)
# Special case create tmpdir here, only when FHS not enabled:
ifneq "$(FHS_ENABLED)" "yes"
	-$(INSTALL_USER) -m 0700 -d $(DESTDIR)$(judgehost_tmpdir)
endif
# Fix permissions and ownership for password files:
	-$(INSTALL_USER) -m 0600 -t $(DESTDIR)$(judgehost_etcdir) \
		etc/restapi.secret

check-root:
	@if [ `id -u` -ne 0 -a -z "$(QUIET)" ]; then \
		echo "**************************************************************" ; \
		echo "***  You do not seem to have the required root privileges. ***" ; \
		echo "***       Perform any failed commands below manually.      ***" ; \
		echo "**************************************************************" ; \
	fi

dist-l:
	$(MAKE) clean-autoconf

# Run aclocal separately from autoreconf, which doesn't pass -I option.
aclocal.m4: configure.ac $(wildcard m4/*.m4)
	aclocal -I m4

configure: configure.ac aclocal.m4
	autoheader
	autoconf

paths.mk:
	@echo "The file 'paths.mk' is not available. Probably you"
	@echo "have not run './configure' yet, aborting..."
	@exit 1

# Configure for running in source tree, not meant for normal use:
maintainer-conf: inplace-conf-common composer-dependencies-dev webapp/.env.local
inplace-conf: inplace-conf-common composer-dependencies
inplace-conf-common: dist
	./configure $(subst 1,-q,$(QUIET)) --prefix=$(CURDIR) \
	            --with-domserver_root=$(CURDIR) \
	            --with-judgehost_root=$(CURDIR) \
	            --with-domjudge_docdir=$(CURDIR)/doc \
	            --with-domserver_logdir=$(CURDIR)/output/log \
	            --with-judgehost_logdir=$(CURDIR)/output/log \
	            --with-domserver_rundir=$(CURDIR)/output/run \
	            --with-judgehost_rundir=$(CURDIR)/output/run \
	            --with-domserver_tmpdir=$(CURDIR)/output/tmp \
	            --with-judgehost_tmpdir=$(CURDIR)/output/tmp \
	            --with-judgehost_judgedir=$(CURDIR)/output/judgings \
	            --with-domserver_databasedumpdir=$(CURDIR)/output/db-dumps \
	            --with-baseurl='http://localhost/domjudge/' \
	            $(CONFIGURE_FLAGS)

# Run Symfony in dev mode (for maintainer-mode):
webapp/.env.local:
	@echo "Creating file '$@'..."
	@echo "# This file was automatically created by 'make maintainer-conf' to run" > $@
	@echo "# the DOMjudge Symfony application in developer mode. Adjust as needed." >> $@
	@echo "APP_ENV=dev" >> $@

# Install the system in place: don't really copy stuff, but create
# symlinks where necessary to let it work from the source tree.
# This stuff is a hack!
maintainer-install: inplace-install composer-dump-autoload-dev
inplace-install: build domserver-create-dirs judgehost-create-dirs
inplace-install-l:
# Replace libjudgedir with symlink to prevent lots of symlinks:
	-rmdir $(judgehost_libjudgedir)
	-rm -f $(judgehost_libjudgedir)
	ln -sf $(CURDIR)/judge  $(judgehost_libjudgedir)
# Add symlinks to binaries:
	$(MKDIR_P) $(judgehost_bindir) $(domserver_bindir)
	ln -sf $(CURDIR)/judge/judgedaemon $(judgehost_bindir)
	ln -sf $(CURDIR)/judge/runguard $(judgehost_bindir)
	ln -sf $(CURDIR)/judge/runpipe  $(judgehost_bindir)
	ln -sf $(CURDIR)/judge/create_cgroups  $(judgehost_bindir)
	ln -sf $(CURDIR)/sql/dj_setup_database $(domserver_bindir)
# Create tmpdir and make tmpdir writable for webserver,
# because judgehost-create-dirs sets wrong permissions:
	$(MKDIR_P) $(domserver_tmpdir)
	chmod a+rwx $(domserver_tmpdir)
# Make sure we're running from a clean state:
	composer auto-scripts
	@echo ""
	@echo "========== Maintainer Install Completed =========="
	@echo ""
	@echo "Next:"
	@echo "    - Configure apache2"
	@echo "        sudo make inplace-postinstall-apache"
	@echo "    - Configure nginx"
	@echo "        sudo make inplace-postinstall-nginx"
	@echo "    - Set up database"
	@echo "        ./sql/dj_setup_database -u root [-r|-p ROOT_PASS] install"
	@echo ""
	@echo "Or you can run these commands manually as root"
	@echo "    - Give the webserver access to things it needs"
	@echo "        setfacl    -m   u:$(WEBSERVER_GROUP):r    $(CURDIR)/etc/dbpasswords.secret"
	@echo "        setfacl    -m   u:$(WEBSERVER_GROUP):r    $(CURDIR)/etc/symfony_app.secret"
	@echo "        setfacl -R -m d:u:$(WEBSERVER_GROUP):rwx  $(CURDIR)/webapp/var"
	@echo "        setfacl -R -m   u:$(WEBSERVER_GROUP):rwx  $(CURDIR)/webapp/var"
	@echo "        setfacl -R -m d:m::rwx          $(CURDIR)/webapp/var"
	@echo "        setfacl -R -m   m::rwx          $(CURDIR)/webapp/var"
	@echo "        # Also make sure you keep access"
	@echo "        setfacl -R -m d:u:$(DOMJUDGE_USER):rwx  $(CURDIR)/webapp/var"
	@echo "        setfacl -R -m   u:$(DOMJUDGE_USER):rwx  $(CURDIR)/webapp/var"
	@echo "    - Configure webserver"
	@echo "        Apache 2:"
	@echo "           ln -sf $(CURDIR)/etc/apache.conf /etc/apache2/conf-available/domjudge.conf"
	@echo "           a2enconf domjudge"
	@echo "           a2enmod rewrite headers"
	@echo "           systemctl restart apache2"
	@echo "        Nginx + PHP-FPM:"
	@echo "           ln -sf $(CURDIR)/etc/nginx-conf /etc/nginx/sites-enabled/"
	@echo "           ln -sf $(CURDIR)/etc/domjudge-fpm /etc/php/$(PHPVERSION)/fpm/pool.d/domjudge.conf"
	@echo "           systemctl restart nginx"
	@echo "           systemctl restart php-fpm"
	@echo ""
	@echo "The admin password for the web interface is in etc/initial_admin_password.secret"

inplace-postinstall-permissions:
	setfacl    -m   u:$(WEBSERVER_GROUP):r    $(CURDIR)/etc/dbpasswords.secret
	setfacl    -m   u:$(WEBSERVER_GROUP):r    $(CURDIR)/etc/symfony_app.secret
	setfacl -R -m d:u:$(WEBSERVER_GROUP):rwx  $(CURDIR)/webapp/var
	setfacl -R -m   u:$(WEBSERVER_GROUP):rwx  $(CURDIR)/webapp/var
	setfacl -R -m d:u:$(DOMJUDGE_USER):rwx    $(CURDIR)/webapp/var
	setfacl -R -m   u:$(DOMJUDGE_USER):rwx    $(CURDIR)/webapp/var
	setfacl -R -m d:m::rwx                    $(CURDIR)/webapp/var
	setfacl -R -m   m::rwx                    $(CURDIR)/webapp/var

inplace-postinstall-apache: inplace-postinstall-permissions
	@if [ ! -d "/etc/apache2/conf-enabled" ]; then echo "Couldn't find directory /etc/apache2/conf-enabled. Is apache installed?"; false; fi
	ln -sf $(CURDIR)/etc/apache.conf /etc/apache2/conf-available/domjudge.conf
	a2enconf domjudge
	a2enmod rewrite headers
	systemctl restart apache2

inplace-postinstall-nginx: inplace-postinstall-permissions
	@if [ ! -d "/etc/nginx/sites-enabled/" ]; then echo "Couldn't find directory /etc/nginx/sites-enabled/. Is nginx installed?"; false; fi
	@if [ ! -d "/etc/php/$(PHPVERSION)/fpm/pool.d/" ]; then echo "Couldn't find directory /etc/php/$(PHPVERSION)/fpm/pool.d/. Is php-fpm installed?"; false; fi
	ln -sf $(CURDIR)/etc/nginx-conf /etc/nginx/sites-enabled/domjudge.conf
	ln -sf $(CURDIR)/etc/domjudge-fpm.conf /etc/php/$(PHPVERSION)/fpm/pool.d/domjudge-fpm.conf
	systemctl restart nginx
	systemctl restart php$(PHPVERSION)-fpm

# Removes created symlinks; generated logs, submissions, etc. remain in output subdir.
inplace-uninstall-l:
	rm -rf $(judgehost_libjudgedir)
	rm -rf $(judgehost_bindir)

# Rules to configure and build for a Coverity scan.
coverity-conf:
	$(MAKE) inplace-conf

coverity-build: paths.mk
	$(MAKE) build build-scripts
# Secondly, delete all upstream PHP libraries to not analyze those:
	-rm -rf lib/vendor/*
	@VERSION=` grep '^VERSION ='   paths.mk | sed 's/^VERSION = *//'` ; \
	PUBLISHED=`grep '^PUBLISHED =' paths.mk | sed 's/^PUBLISHED = *//'` ; \
	if [ "$$PUBLISHED" = release ]; then DESC="release" ; \
	elif [ -n "$$PUBLISHED" ];      then DESC="snapshot $$PUBLISHED" ; \
	elif [ ! -d .git ];             then DESC="unknown source on `date`" ; fi ; \
	echo "VERSION=$$VERSION" > cov-submit-data-version.sh ; \
	if [ -n "$$DESC" ]; then echo "DESC=$$DESC" >> cov-submit-data-version.sh ; fi

clean-l:
# Remove Coverity scan data:
	-rm -rf cov-int domjudge-scan.t* coverity-scan.tar.xz cov-submit-data-version.sh

distclean-l: clean-autoconf
	-rm -f paths.mk

maintainer-clean: inplace-uninstall
maintainer-clean-l:
	-rm -f configure aclocal.m4

clean-autoconf:
	-rm -rf config.status config.cache config.log autom4te.cache

.PHONY: $(addsuffix -create-dirs,domserver judgehost docs) check-root \
        $(addprefix inplace-,conf conf-common install uninstall) \
        $(addprefix maintainer-,conf install) clean-autoconf config distdocs \
        composer-dependencies composer-dependencies-dev \
        composer-dump-autoload-dev \
        coverity-conf coverity-build