Skip to content

Files

Latest commit

 

History

History

adc2

\mainpage Main Page


ADC 2 click

ADC 2 click carries MCP3551/3, which is a 22-bit ADC with automatic internal offset and gain calibration.

click Product page


Click library

  • Author : MikroE Team
  • Date : Jan 2020.
  • Type : SPI type

Software Support

We provide a library for the Adc2 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

This library contains API for Adc2 Click driver.

Standard key functions :

  • Config Object Initialization function.

void adc2_cfg_setup ( adc2_cfg_t *cfg );

  • Initialization function.

ADC2_RETVAL adc2_init ( adc2_t *ctx, adc2_cfg_t *cfg );

  • Click Default Configuration function.

void adc2_default_cfg ( adc2_t *ctx );

Example key functions :

  • Function is used to check overflow high state.

uint8_t adc2_check_over_high ( adc2_t *ctx );

  • Function is used to check overflow low state.

uint8_t adc2_check_over_low ( adc2_t *ctx );

  • Function is used to read specific data from ADC convertor.

uint32_t adc2_adc_value_read ( adc2_t *ctx );

Examples Description

This application enables usage of the 22bit ADC.

The demo application is composed of two sections :

Application Init

Initalizes SPI driver and makes an initial log.

void application_init ( void )
{
    log_cfg_t log_cfg;
    adc2_cfg_t cfg;

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, "---- Application Init ----" );

    //  Click initialization.

    adc2_cfg_setup( &cfg );
    ADC2_MAP_MIKROBUS( cfg, MIKROBUS_1 );
    adc2_init( &adc2, &cfg );

    Delay_ms( 100 );

    log_printf( &logger, "------------------\r\n" );
    log_printf( &logger, "    ADC 2 Click   \r\n" );
    log_printf( &logger, "------------------\r\n" );
}
  

Application Task

This is an example that shows the capabilities of the ADC 2 click

void application_task ( void )
{
    uint32_t adc_val;

    //  Task implementation.

    adc_val = adc2_adc_value_read( &adc2 );

    log_printf( &logger, "Value : %d", adc_val );
    log_printf( &logger, "------------------\r\n" );
    Delay_ms( 1000 );
}

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

  • MikroSDK.Board
  • MikroSDK.Log
  • Click.Adc2

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.