brushless17

\mainpage Main Page

---

Brushless 17 click

Brushless 17 Click is a compact add-on board suitable for controlling brushless DC (BLDC) motors with any MCU. This board features the L6229Q, DMOS fully integrated three-phase BLDC motor driver with overcurrent protection from STMicroelectronics. This motor driver combines isolated DMOS power transistors with CMOS and bipolar circuits on the same chip, realized in BCD (Bipolar-CMOS-DMOS) multipower technology. It includes all the circuitry for a three-phase BLDC motor drive, including a three-phase DMOS bridge, a constant off-time PWM current controller, and the decoding logic for single-ended hall sensors that generate the required sequence for the power stage.

click Product page

---

Click library

• Author : Stefan Filipovic
• Date : Jan 2022.
• Type : PWM type

Software Support

We provide a library for the Brushless 17 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Library Description

This library contains API for Brushless 17 Click driver.

Standard key functions :

• brushless17_cfg_setup Config Object Initialization function.

void brushless17_cfg_setup ( brushless17_cfg_t *cfg );

• brushless17_init Initialization function.

err_t brushless17_init ( brushless17_t *ctx, brushless17_cfg_t *cfg );

• brushless17_default_cfg Click Default Configuration function.

err_t brushless17_default_cfg ( brushless17_t *ctx );

Example key functions :

• brushless17_set_duty_cycle This function sets the PWM duty cycle in percentages ( Range[ 0..1 ] ).

err_t brushless17_set_duty_cycle ( brushless17_t *ctx, float duty_cycle );

• brushless17_switch_direction This function switches the direction by toggling the DIR pin state.

void brushless17_switch_direction ( brushless17_t *ctx );

• brushless17_get_diagnostic_pin This function returns the DIAG pin logic state.

uint8_t brushless17_get_diagnostic_pin ( brushless17_t *ctx );

Example Description

This example demonstrates the use of the Brushless 17 click board by driving the motor in both directions at different speeds.

The demo application is composed of two sections :

Application Init

Initializes the driver and performs the click default configuration.

void application_init ( void )
{
    log_cfg_t log_cfg;  /**< Logger config object. */
    brushless17_cfg_t brushless17_cfg;  /**< Click config object. */

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );

    // Click initialization.
    brushless17_cfg_setup( &brushless17_cfg );
    BRUSHLESS17_MAP_MIKROBUS( brushless17_cfg, MIKROBUS_1 );
    if ( PWM_ERROR == brushless17_init( &brushless17, &brushless17_cfg ) )
    {
        log_error( &logger, " Communication init." );
        for ( ; ; );
    }
    
    if ( BRUSHLESS17_ERROR == brushless17_default_cfg ( &brushless17 ) )
    {
        log_error( &logger, " Default configuration." );
        for ( ; ; );
    }
    
    log_info( &logger, " Application Task " );
}

Application Task

Controls the motor speed by changing the PWM duty cycle every 500ms. The duty cycle ranges from 40% to 80%. At the minimal speed, the motor switches direction. Each step will be logged on the USB UART where you can track the program flow.

void application_task ( void )
{
    static int8_t duty_cnt = 4;
    static int8_t duty_inc = 1;
    float duty = duty_cnt / 10.0;
    
    brushless17_set_duty_cycle ( &brushless17, duty );
    log_printf( &logger, "> Duty: %d%%\r\n", ( uint16_t )( duty_cnt * 10 ) );
    
    duty_cnt += duty_inc;
    if ( 8 == duty_cnt ) 
    {
        duty_inc = -1;
    }
    else if ( 3 == duty_cnt ) 
    {
        duty_inc = 1;
        duty_cnt = 4;
        log_printf( &logger, " Switch direction\r\n\n" );
        brushless17_switch_direction ( &brushless17 );
    }
    
    if ( !brushless17_get_diagnostic_pin ( &brushless17 ) )
    {
        log_info ( &logger, " An overcurrent or overtemperature event has occured " );
    }

    Delay_ms( 500 );
}

The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Other Mikroe Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.Brushless17

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.

---