proximity

\mainpage Main Page

---

Proximity click

Proximity Click features VCNL4010 proximity and ambient light sensor. It combines an infrared emitter and PIN photodiode for proximity measurement with a range of up to 20cm.

click Product page

---

Click library

• Author : MikroE Team
• Date : Dec 2019.
• Type : I2C type

Software Support

We provide a library for the Proximity Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

This library contains API for Proximity Click driver.

Standard key functions :

• Config Object Initialization function.

void proximity_cfg_setup ( proximity_cfg_t *cfg );

• Initialization function.

PROXIMITY_RETVAL proximity_init ( proximity_t *ctx, proximity_cfg_t *cfg );

• Click Default Configuration function.

void proximity_default_cfg ( proximity_t *ctx );

Example key functions :

• Functions for write data

void proximity_write_data( proximity_t ctx, uint8_t w_addr, uint8_t wr_data, uint8_t n_len);

• Functions for reads Proximity data

uint16_t proximity_read_prox_data( proximity_t *ctx );

• Functions for reads Ambient light

uint16_t proximity_read_ambient_light( proximity_t *ctx );

Examples Description

Measures proximity data and ambient light.

The demo application is composed of two sections :

Application Init

Initialization driver init and sets chip on the default mode

void application_init ( void )
{
    log_cfg_t log_cfg;
    proximity_cfg_t cfg;

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, "---- Application Init ----" );

    //  Click initialization.

    proximity_cfg_setup( &cfg );
    PROXIMITY_MAP_MIKROBUS( cfg, MIKROBUS_1 );
    proximity_init( &proximity, &cfg );
    proximity_set_default_mode( &proximity );
}
  

Application Task

Reads Proximity data and Ambient light data and logs data to USBUART every 500 ms.

void application_task ( void )
{
    //  Task implementation.

    proximity_ambi_value = proximity_read_ambient_light( &proximity );
    proximity_proxi_value = proximity_read_prox_data( &proximity );

    log_printf( &logger, "Proximity:   %u\r\n", proximity_proxi_value);
    log_printf( &logger, " Ambient:   %u LUX\r\n ", proximity_ambi_value);

    Delay_ms( 500 );
}

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.Proximity

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.

---