Skip to content

Files

Latest commit

 

History

History
169 lines (122 loc) · 5.07 KB

details.md

File metadata and controls

169 lines (122 loc) · 5.07 KB

Thermo 27 click

Thermo 27 Click is a compact add-on board that accurately measures temperature. This board features the TMP114, a high-accuracy digital temperature sensor from Texas Instruments.

click Product page


Click library

  • Author : Stefan Ilic
  • Date : Nov 2022.
  • Type : I2C type

Software Support

We provide a library for the Thermo 27 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Library Description

This library contains API for Thermo 27 Click driver.

Standard key functions :

  • thermo27_cfg_setup Config Object Initialization function.
void thermo27_cfg_setup ( thermo27_cfg_t *cfg );
  • thermo27_init Initialization function.
err_t thermo27_init ( thermo27_t *ctx, thermo27_cfg_t *cfg );
  • thermo27_default_cfg Click Default Configuration function.
err_t thermo27_default_cfg ( thermo27_t *ctx );

Example key functions :

  • thermo27_write_register Thermo 27 register writing function.
err_t thermo27_write_register ( thermo27_t *ctx, uint8_t reg, uint16_t data_in );
  • thermo27_get_device_id Thermo 27 get device id function.
err_t thermo27_get_device_id ( thermo27_t *ctx, uint16_t *device_id );
  • thermo27_read_temp Thermo 27 get read temperature function.
err_t thermo27_read_temp ( thermo27_t *ctx, float *temp_out );

Example Description

This example demonstrates the use of Thermo 27 Click board by reading and displaying the temperature measurements.

The demo application is composed of two sections :

Application Init

Initializes the driver and reads the device id, and after that resets the device and performs default configuration.

void application_init ( void ) 
{
    log_cfg_t log_cfg;  /**< Logger config object. */
    thermo27_cfg_t thermo27_cfg;  /**< Click config object. */

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );

    // Click initialization.
    thermo27_cfg_setup( &thermo27_cfg );
    THERMO27_MAP_MIKROBUS( thermo27_cfg, MIKROBUS_1 );
    if ( I2C_MASTER_ERROR == thermo27_init( &thermo27, &thermo27_cfg ) ) 
    {
        log_error( &logger, " Communication init." );
        for ( ; ; );
    }
    
    uint16_t device_id;
    thermo27_get_device_id( &thermo27, &device_id );
    if ( THERMO27_DEVICE_ID != device_id )
    {
        log_error( &logger, " Communication error." );
        for ( ; ; );
    }
    
    if ( THERMO27_ERROR == thermo27_default_cfg( &thermo27 ) )
    {
        log_error( &logger, " Default configuration." );
        for ( ; ; );
    }
   
    log_info( &logger, " Application Task " );
    log_printf( &logger, " ======================= \r\n");
}

Application Task

Reads the temperature measurement in degrees Celsius and displays the results on the USB UART at a rate of once per second.

void application_task ( void ) 
{
    float temperature;
    uint8_t status;
    
    thermo27_get_alert_reg( &thermo27, &status );
    if ( THERMO27_DATA_READY_FLAG & status )
    {
        thermo27_read_temp( &thermo27, &temperature );
        log_printf( &logger, " Temperature: %f degC \r\n", temperature );
        log_printf( &logger, " ======================= \r\n");
    }
}

The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Other Mikroe Libraries used in the example:

  • MikroSDK.Board
  • MikroSDK.Log
  • Click.Thermo27

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.