labels for bandsaw blades

[LukasFreeze]

As you may have read on Telegram last night, several new (or replacement) bandsaw blades for the Metabo BS 1638 W are in the mail and should be coming soon :-)

Let's store them better than before (Anita already lowered the wall holders) and mark them with durable & informative labels!

What I had in mind:

• similar size as currently
• laminated paper
• string loop to hang them on a folded blade
• fields for each of the values in the wiki table
  ** could be a printed property list on the left with manually added values on the laminate (by permanent marker, correctable with alcohol)

Who would like to prepare a printing template and make a couple of blank labels?

[loewenstein]

I can probably take a look at the current size today and prepare something. Might take until next weekend to get things to the space though, but I have something to laminate paper at home.

[loewenstein]

Hey @LukasFreeze, does this look good enough?

Band Saw Blades Labels.pdf

Then I'd print, cut and laminate them. I don't really took a measure. Those are 7x10 cm, which might be a little bigger than the existing ones.

[LukasFreeze]

Awesome, thank you! That size should be fine, it doesn't need to be an exact copy and looks close enough :-) "Tooth size" is not really measured though ("Zahnweite" is just a different way of writing the pitch, it only has a separate table column for sortability). How about this order: width - tooth pitch - **kerf** - min radius - tooth shape - materials? Sorry, I only thought of this now that I saw it written down... "Width before pitch" is how the shops label their blades, the ordering in the wiki table can be changed accordingly :-) The "kerf" column is empty at the moment, but will be measured when we fill out the labels! If you have a duplex printer, "ID" and "status" would be nice to have on the other side. But we could just as well write those by hand if it would complicate things!

…

On Fri, Mar 17, 2023, 15:25 Jan von Löwenstein ***@***.***> wrote: Hey @LukasFreeze <https://github.com/LukasFreeze>, does this look good enough? Band Saw Blades Labels.pdf <https://github.com/comakingspace/do-something/files/11002308/Band.Saw.Blades.Labels.pdf> Then I'd print, cut and laminate them. I don't really took a measure. Those are 7x10 cm, which might be a little bigger than the existing ones. — Reply to this email directly, view it on GitHub <#291 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AEWXG242OJQ32B3C5P447M3W4RX65ANCNFSM6AAAAAAVWV2JOE> . You are receiving this because you were mentioned.Message ID: ***@***.***>

[loewenstein]