Tanix TX3 emmc install error

[EastWoodYang]

Hi Devmfc,
Thanks you for your great work.
I tried to install your debian in emmc on my Tanix TX3, but show error:

[EastWoodYang]

Also, Ethernet is not working, my Tanix TX3 is 100m, not Gigabit, so I use dtb from https://github.com/ophub/amlogic-s9xxx-armbian/blob/main/build-armbian/armbian-files/platform-files/amlogic/bootfs/dtb/amlogic/meson-sm1-tx3-bz.dtb, and it work.

[EastWoodYang]

#28 (comment)

I will try ‘source /etc/boot-run-once/03-set_fw_env_config‘ tonight, hope it work

[EastWoodYang]

Run source /etc/boot-run-once/03-set_fw_env_config is not working for my box. and fw_env.config is empty.

[devmfc]

It can't find the environment storage for your bootloader. Did you flash some other image to your box before? Can you post the output of ~/aml-part.sh

[EastWoodYang]

Yes, your are right ! I flash other image to my box before. and output of ~/aml-part.sh:

[devmfc]

My images assume the presence of the stock bootloader. So you have two things you could try:

1. revert to stock android and try again
2. create an fw_env.config for the location of the env partition. But I don't know what bootloader your box is currently using, so the risk of bricking you box is much higher with this option. And I don't have the time to help you unbrick it

[EastWoodYang]

I had reset my box to Android, and already install to emmc. thank you so mush!

And could you add Tanix TX3 100m support in the next release ?

[devmfc]

Could you test the attached DTB?

meson-sm1-tanixtx3-100M.zip

[EastWoodYang]

after replace 100M dtd, my box can not boot from emmc, but can boot from usb. and now I install to emmc again.

[EastWoodYang]

Hi devmfc, Where is meson-sm1-tanixtx3-100M dtb source ? I want to change some config.