diff --git a/go.mod b/go.mod index 60b46d1c..2d725417 100644 --- a/go.mod +++ b/go.mod @@ -6,7 +6,7 @@ require ( github.com/blang/semver v3.5.1+incompatible github.com/container-storage-interface/spec v1.8.0 github.com/digitalocean/go-metadata v0.0.0-20220602160802-6f1b22e9ba8c - github.com/digitalocean/godo v1.99.0 + github.com/digitalocean/godo v1.102.1 github.com/docker/docker v20.10.24+incompatible github.com/golang/protobuf v1.5.3 github.com/google/go-cmp v0.5.9 @@ -34,6 +34,8 @@ require ( github.com/go-logr/logr v1.2.4 // indirect github.com/gogo/protobuf v1.3.2 // indirect github.com/google/go-querystring v1.1.0 // indirect + github.com/hashicorp/go-cleanhttp v0.5.2 // indirect + github.com/hashicorp/go-retryablehttp v0.7.4 // indirect github.com/kr/text v0.2.0 // indirect github.com/moby/sys/mountinfo v0.6.2 // indirect github.com/moby/term v0.0.0-20221205130635-1aeaba878587 // indirect diff --git a/go.sum b/go.sum index 4f7894d2..c1c691f7 100644 --- a/go.sum +++ b/go.sum @@ -28,8 +28,8 @@ github.com/davecgh/go-spew v1.1.1 h1:vj9j/u1bqnvCEfJOwUhtlOARqs3+rkHYY13jYWTU97c github.com/davecgh/go-spew v1.1.1/go.mod h1:J7Y8YcW2NihsgmVo/mv3lAwl/skON4iLHjSsI+c5H38= github.com/digitalocean/go-metadata v0.0.0-20220602160802-6f1b22e9ba8c h1:BCnplPDcwhU7ooGpzzPTAX2aKqcGL51Gfdz+df6hY5Q= github.com/digitalocean/go-metadata v0.0.0-20220602160802-6f1b22e9ba8c/go.mod h1:lNrzMwI4fx6xfzieyLEpYIJPLWjT/Sak4G/hIzGTEL4= -github.com/digitalocean/godo v1.99.0 h1:gUHO7n9bDaZFWvbzOum4bXE0/09ZuYA9yA8idQHX57E= -github.com/digitalocean/godo v1.99.0/go.mod h1:SsS2oXo2rznfM/nORlZ/6JaUJZFhmKTib1YhopUc8NA= +github.com/digitalocean/godo v1.102.1 h1:BrNePwIXjQWjOJXVTBqkURMjm70BRR0qXbRKfHNBF24= +github.com/digitalocean/godo v1.102.1/go.mod h1:SaUYccN7r+CO1QtsbXGypAsgobDrmSfVMJESEfXgoEg= github.com/docker/distribution v2.8.2+incompatible h1:T3de5rq0dB1j30rp0sA2rER+m322EBzniBPB6ZIzuh8= github.com/docker/distribution v2.8.2+incompatible/go.mod h1:J2gT2udsDAN96Uj4KfcMRqY0/ypR+oyYUYmja8H+y+w= github.com/docker/docker v20.10.24+incompatible h1:Ugvxm7a8+Gz6vqQYQQ2W7GYq5EUPaAiuPgIfVyI3dYE= @@ -93,6 +93,12 @@ github.com/google/uuid v1.1.2/go.mod h1:TIyPZe4MgqvfeYDBFedMoGGpEw/LqOeaOT+nhxU+ github.com/google/uuid v1.3.0 h1:t6JiXgmwXMjEs8VusXIJk2BXHsn+wx8BZdTaoZ5fu7I= github.com/google/uuid v1.3.0/go.mod h1:TIyPZe4MgqvfeYDBFedMoGGpEw/LqOeaOT+nhxU+yHo= github.com/grpc-ecosystem/grpc-gateway v1.16.0/go.mod h1:BDjrQk3hbvj6Nolgz8mAMFbcEtjT1g+wF4CSlocrBnw= +github.com/hashicorp/go-cleanhttp v0.5.2 h1:035FKYIWjmULyFRBKPs8TBQoi0x6d9G4xc9neXJWAZQ= +github.com/hashicorp/go-cleanhttp v0.5.2/go.mod h1:kO/YDlP8L1346E6Sodw+PrpBSV4/SoxCXGY6BqNFT48= +github.com/hashicorp/go-hclog v0.9.2 h1:CG6TE5H9/JXsFWJCfoIVpKFIkFe6ysEuHirp4DxCsHI= +github.com/hashicorp/go-hclog v0.9.2/go.mod h1:5CU+agLiy3J7N7QjHK5d05KxGsuXiQLrjA0H7acj2lQ= +github.com/hashicorp/go-retryablehttp v0.7.4 h1:ZQgVdpTdAL7WpMIwLzCfbalOcSUdkDZnpUv3/+BxzFA= +github.com/hashicorp/go-retryablehttp v0.7.4/go.mod h1:Jy/gPYAdjqffZ/yFGCFV2doI5wjtH1ewM9u8iYVjtX8= github.com/hpcloud/tail v1.0.0/go.mod h1:ab1qPbhIpdTxEkNHXyeSf5vhxWSCs/tWer42PpOxQnU= github.com/ianlancetaylor/demangle v0.0.0-20200824232613-28f6c0f3b639/go.mod h1:aSSvb/t6k1mPoxDqO4vJh6VOCGPwU4O0C2/Eqndh1Sc= github.com/kisielk/errcheck v1.5.0/go.mod h1:pFxgyoBC7bSaBwPgfKdkLd5X25qrDl4LWUI2bnpBCr8= diff --git a/vendor/github.com/digitalocean/godo/CHANGELOG.md b/vendor/github.com/digitalocean/godo/CHANGELOG.md index 9c1849b2..758fa1b6 100644 --- a/vendor/github.com/digitalocean/godo/CHANGELOG.md +++ b/vendor/github.com/digitalocean/godo/CHANGELOG.md @@ -1,5 +1,24 @@ # Change Log +## [v1.102.1] - 2023-08-17 + +- #629 - @andrewsomething - Provide a custom retryablehttp.ErrorHandler for more consistent returns using retries. + +## [v1.102.0] - 2023-08-14 + +- #624 - @danaelhe - Update README.md with Retryable Info +- #626 - @andrewsomething - Allow configuring go-retryablehttp.Logger +- #625 - @andrewsomething - Export the HTTP client + +## [v1.101.0] - 2023-08-09 + +- #619 - @danaelhe - Add retryablehttp Client Option + +## [v1.100.0] - 2023-07-20 + +- #618 - @asaha - load balancers: introduce new type field +- #620 - @andrewsomething - account: add name field. + ## [v1.99.0] - 2023-04-24 - #616 - @bentranter - Bump CI version for Go 1.20 diff --git a/vendor/github.com/digitalocean/godo/README.md b/vendor/github.com/digitalocean/godo/README.md index 4c9ee2d7..fd3cdbd5 100644 --- a/vendor/github.com/digitalocean/godo/README.md +++ b/vendor/github.com/digitalocean/godo/README.md @@ -155,6 +155,31 @@ func ListRepositoriesV2(ctx context.Context, client *godo.Client, registryName s } ``` +### Automatic Retries and Exponential Backoff + +The Godo client can be configured to use automatic retries and exponentional backoff for requests that fail with 429 or 500-level response codes via [go-retryablehttp](https://github.com/hashicorp/go-retryablehttp). To configure Godo to enable usage of go-retryablehttp, the `RetryConfig.RetryMax` must be set. + +```go +tokenSrc := oauth2.StaticTokenSource(&oauth2.Token{ + AccessToken: "dop_v1_xxxxxx", +}) + +oauth_client := oauth2.NewClient(oauth2.NoContext, tokenSrc) + +waitMax := godo.PtrTo(6.0) +waitMin := godo.PtrTo(3.0) + +retryConfig := godo.RetryConfig{ + RetryMax: 3, + RetryWaitMin: waitMin, + RetryWaitMax: waitMax, +} + +client, err := godo.New(oauth_client, godo.WithRetryAndBackoffs(retryConfig)) +``` + +Please refer to the [RetryConfig Godo documentation](https://pkg.go.dev/github.com/digitalocean/godo#RetryConfig) for more information. + ## Versioning Each version of the client is tagged and the version is updated accordingly. diff --git a/vendor/github.com/digitalocean/godo/account.go b/vendor/github.com/digitalocean/godo/account.go index 48582c9e..7f619008 100644 --- a/vendor/github.com/digitalocean/godo/account.go +++ b/vendor/github.com/digitalocean/godo/account.go @@ -27,6 +27,7 @@ type Account struct { ReservedIPLimit int `json:"reserved_ip_limit,omitempty"` VolumeLimit int `json:"volume_limit,omitempty"` Email string `json:"email,omitempty"` + Name string `json:"name,omitempty"` UUID string `json:"uuid,omitempty"` EmailVerified bool `json:"email_verified,omitempty"` Status string `json:"status,omitempty"` diff --git a/vendor/github.com/digitalocean/godo/godo.go b/vendor/github.com/digitalocean/godo/godo.go index c48a5f78..3c8482f3 100644 --- a/vendor/github.com/digitalocean/godo/godo.go +++ b/vendor/github.com/digitalocean/godo/godo.go @@ -6,7 +6,6 @@ import ( "encoding/json" "fmt" "io" - "io/ioutil" "net/http" "net/url" "reflect" @@ -16,25 +15,28 @@ import ( "time" "github.com/google/go-querystring/query" + "github.com/hashicorp/go-retryablehttp" "golang.org/x/oauth2" "golang.org/x/time/rate" ) const ( - libraryVersion = "1.99.0" + libraryVersion = "1.102.1" defaultBaseURL = "https://api.digitalocean.com/" userAgent = "godo/" + libraryVersion mediaType = "application/json" - headerRateLimit = "RateLimit-Limit" - headerRateRemaining = "RateLimit-Remaining" - headerRateReset = "RateLimit-Reset" + headerRateLimit = "RateLimit-Limit" + headerRateRemaining = "RateLimit-Remaining" + headerRateReset = "RateLimit-Reset" + headerRequestID = "x-request-id" + internalHeaderRetryAttempts = "X-Godo-Retry-Attempts" ) // Client manages communication with DigitalOcean V2 API. type Client struct { // HTTP client used to communicate with the DO API. - client *http.Client + HTTPClient *http.Client // Base URL for API requests. BaseURL *url.URL @@ -92,6 +94,30 @@ type Client struct { // Optional rate limiter to ensure QoS. rateLimiter *rate.Limiter + + // Optional retry values. Setting the RetryConfig.RetryMax value enables automatically retrying requests + // that fail with 429 or 500-level response codes using the go-retryablehttp client + RetryConfig RetryConfig +} + +// RetryConfig sets the values used for enabling retries and backoffs for +// requests that fail with 429 or 500-level response codes using the go-retryablehttp client. +// RetryConfig.RetryMax must be configured to enable this behavior. RetryConfig.RetryWaitMin and +// RetryConfig.RetryWaitMax are optional, with the default values being 1.0 and 30.0, respectively. +// +// You can use +// +// godo.PtrTo(1.0) +// +// to explicitly set the RetryWaitMin and RetryWaitMax values. +// +// Note: Opting to use the go-retryablehttp client will overwrite any custom HTTP client passed into New(). +// Only the oauth2.TokenSource and Timeout will be maintained. +type RetryConfig struct { + RetryMax int + RetryWaitMin *float64 // Minimum time to wait + RetryWaitMax *float64 // Maximum time to wait + Logger interface{} // Customer logger instance. Must implement either go-retryablehttp.Logger or go-retryablehttp.LeveledLogger } // RequestCompletionCallback defines the type of the request callback function @@ -153,6 +179,9 @@ type ErrorResponse struct { // RequestID returned from the API, useful to contact support. RequestID string `json:"request_id"` + + // Attempts is the number of times the request was attempted when retries are enabled. + Attempts int } // Rate contains the rate limit for the current client. @@ -216,7 +245,7 @@ func NewClient(httpClient *http.Client) *Client { baseURL, _ := url.Parse(defaultBaseURL) - c := &Client{client: httpClient, BaseURL: baseURL, UserAgent: userAgent} + c := &Client{HTTPClient: httpClient, BaseURL: baseURL, UserAgent: userAgent} c.Account = &AccountServiceOp{client: c} c.Actions = &ActionsServiceOp{client: c} @@ -271,6 +300,49 @@ func New(httpClient *http.Client, opts ...ClientOpt) (*Client, error) { } } + // if retryMax is set it will use the retryablehttp client. + if c.RetryConfig.RetryMax > 0 { + retryableClient := retryablehttp.NewClient() + retryableClient.RetryMax = c.RetryConfig.RetryMax + + if c.RetryConfig.RetryWaitMin != nil { + retryableClient.RetryWaitMin = time.Duration(*c.RetryConfig.RetryWaitMin * float64(time.Second)) + } + if c.RetryConfig.RetryWaitMax != nil { + retryableClient.RetryWaitMax = time.Duration(*c.RetryConfig.RetryWaitMax * float64(time.Second)) + } + + // By default this is nil and does not log. + retryableClient.Logger = c.RetryConfig.Logger + + // if timeout is set, it is maintained before overwriting client with StandardClient() + retryableClient.HTTPClient.Timeout = c.HTTPClient.Timeout + + // This custom ErrorHandler is required to provide errors that are consistent + // with a *godo.ErrorResponse and a non-nil *godo.Response while providing + // insight into retries using an internal header. + retryableClient.ErrorHandler = func(resp *http.Response, err error, numTries int) (*http.Response, error) { + if resp != nil { + resp.Header.Add(internalHeaderRetryAttempts, strconv.Itoa(numTries)) + + return resp, err + } + + return resp, err + } + + var source *oauth2.Transport + if _, ok := c.HTTPClient.Transport.(*oauth2.Transport); ok { + source = c.HTTPClient.Transport.(*oauth2.Transport) + } + c.HTTPClient = retryableClient.StandardClient() + c.HTTPClient.Transport = &oauth2.Transport{ + Base: c.HTTPClient.Transport, + Source: source.Source, + } + + } + return c, nil } @@ -315,6 +387,18 @@ func SetStaticRateLimit(rps float64) ClientOpt { } } +// WithRetryAndBackoffs sets retry values. Setting the RetryConfig.RetryMax value enables automatically retrying requests +// that fail with 429 or 500-level response codes using the go-retryablehttp client +func WithRetryAndBackoffs(retryConfig RetryConfig) ClientOpt { + return func(c *Client) error { + c.RetryConfig.RetryMax = retryConfig.RetryMax + c.RetryConfig.RetryWaitMax = retryConfig.RetryWaitMax + c.RetryConfig.RetryWaitMin = retryConfig.RetryWaitMin + c.RetryConfig.Logger = retryConfig.Logger + return nil + } +} + // NewRequest creates an API request. A relative URL can be provided in urlStr, which will be resolved to the // BaseURL of the Client. Relative URLS should always be specified without a preceding slash. If specified, the // value pointed to by body is JSON encoded and included in as the request body. @@ -405,7 +489,7 @@ func (c *Client) Do(ctx context.Context, req *http.Request, v interface{}) (*Res } } - resp, err := DoRequestWithClient(ctx, c.client, req) + resp, err := DoRequestWithClient(ctx, c.HTTPClient, req) if err != nil { return nil, err } @@ -422,7 +506,7 @@ func (c *Client) Do(ctx context.Context, req *http.Request, v interface{}) (*Res // won't reuse it anyway. const maxBodySlurpSize = 2 << 10 if resp.ContentLength == -1 || resp.ContentLength <= maxBodySlurpSize { - io.CopyN(ioutil.Discard, resp.Body, maxBodySlurpSize) + io.CopyN(io.Discard, resp.Body, maxBodySlurpSize) } if rerr := resp.Body.Close(); err == nil { @@ -472,12 +556,17 @@ func DoRequestWithClient( } func (r *ErrorResponse) Error() string { + var attempted string + if r.Attempts > 0 { + attempted = fmt.Sprintf("; giving up after %d attempt(s)", r.Attempts) + } + if r.RequestID != "" { - return fmt.Sprintf("%v %v: %d (request %q) %v", - r.Response.Request.Method, r.Response.Request.URL, r.Response.StatusCode, r.RequestID, r.Message) + return fmt.Sprintf("%v %v: %d (request %q) %v%s", + r.Response.Request.Method, r.Response.Request.URL, r.Response.StatusCode, r.RequestID, r.Message, attempted) } - return fmt.Sprintf("%v %v: %d %v", - r.Response.Request.Method, r.Response.Request.URL, r.Response.StatusCode, r.Message) + return fmt.Sprintf("%v %v: %d %v%s", + r.Response.Request.Method, r.Response.Request.URL, r.Response.StatusCode, r.Message, attempted) } // CheckResponse checks the API response for errors, and returns them if present. A response is considered an @@ -490,7 +579,7 @@ func CheckResponse(r *http.Response) error { } errorResponse := &ErrorResponse{Response: r} - data, err := ioutil.ReadAll(r.Body) + data, err := io.ReadAll(r.Body) if err == nil && len(data) > 0 { err := json.Unmarshal(data, errorResponse) if err != nil { @@ -499,7 +588,12 @@ func CheckResponse(r *http.Response) error { } if errorResponse.RequestID == "" { - errorResponse.RequestID = r.Header.Get("x-request-id") + errorResponse.RequestID = r.Header.Get(headerRequestID) + } + + attempts, strconvErr := strconv.Atoi(r.Header.Get(internalHeaderRetryAttempts)) + if strconvErr == nil { + errorResponse.Attempts = attempts } return errorResponse diff --git a/vendor/github.com/digitalocean/godo/load_balancers.go b/vendor/github.com/digitalocean/godo/load_balancers.go index 6a9a70ef..7e1cfc16 100644 --- a/vendor/github.com/digitalocean/godo/load_balancers.go +++ b/vendor/github.com/digitalocean/godo/load_balancers.go @@ -6,10 +6,17 @@ import ( "net/http" ) -const loadBalancersBasePath = "/v2/load_balancers" -const forwardingRulesPath = "forwarding_rules" +const ( + dropletsPath = "droplets" + forwardingRulesPath = "forwarding_rules" + loadBalancersBasePath = "/v2/load_balancers" +) -const dropletsPath = "droplets" +// Load Balancer types. +const ( + LoadBalancerTypeGlobal = "GLOBAL" + LoadBalancerTypeRegional = "REGIONAL" +) // LoadBalancersService is an interface for managing load balancers with the DigitalOcean API. // See: https://docs.digitalocean.com/reference/api/api-reference/#tag/Load-Balancers @@ -35,6 +42,7 @@ type LoadBalancer struct { SizeSlug string `json:"size,omitempty"` // SizeUnit is mutually exclusive with SizeSlug. Only one should be specified SizeUnit uint32 `json:"size_unit,omitempty"` + Type string `json:"type,omitempty"` Algorithm string `json:"algorithm,omitempty"` Status string `json:"status,omitempty"` Created string `json:"created_at,omitempty"` @@ -74,6 +82,7 @@ func (l LoadBalancer) AsRequest() *LoadBalancerRequest { Algorithm: l.Algorithm, SizeSlug: l.SizeSlug, SizeUnit: l.SizeUnit, + Type: l.Type, ForwardingRules: append([]ForwardingRule(nil), l.ForwardingRules...), DropletIDs: append([]int(nil), l.DropletIDs...), Tag: l.Tag, @@ -190,6 +199,7 @@ type LoadBalancerRequest struct { SizeSlug string `json:"size,omitempty"` // SizeUnit is mutually exclusive with SizeSlug. Only one should be specified SizeUnit uint32 `json:"size_unit,omitempty"` + Type string `json:"type,omitempty"` ForwardingRules []ForwardingRule `json:"forwarding_rules,omitempty"` HealthCheck *HealthCheck `json:"health_check,omitempty"` StickySessions *StickySessions `json:"sticky_sessions,omitempty"` diff --git a/vendor/github.com/hashicorp/go-cleanhttp/LICENSE b/vendor/github.com/hashicorp/go-cleanhttp/LICENSE new file mode 100644 index 00000000..e87a115e --- /dev/null +++ b/vendor/github.com/hashicorp/go-cleanhttp/LICENSE @@ -0,0 +1,363 @@ +Mozilla Public License, version 2.0 + +1. Definitions + +1.1. "Contributor" + + means each individual or legal entity that creates, contributes to the + creation of, or owns Covered Software. + +1.2. "Contributor Version" + + means the combination of the Contributions of others (if any) used by a + Contributor and that particular Contributor's Contribution. + +1.3. "Contribution" + + means Covered Software of a particular Contributor. + +1.4. "Covered Software" + + means Source Code Form to which the initial Contributor has attached the + notice in Exhibit A, the Executable Form of such Source Code Form, and + Modifications of such Source Code Form, in each case including portions + thereof. + +1.5. "Incompatible With Secondary Licenses" + means + + a. that the initial Contributor has attached the notice described in + Exhibit B to the Covered Software; or + + b. that the Covered Software was made available under the terms of + version 1.1 or earlier of the License, but not also under the terms of + a Secondary License. + +1.6. "Executable Form" + + means any form of the work other than Source Code Form. + +1.7. "Larger Work" + + means a work that combines Covered Software with other material, in a + separate file or files, that is not Covered Software. + +1.8. "License" + + means this document. + +1.9. "Licensable" + + means having the right to grant, to the maximum extent possible, whether + at the time of the initial grant or subsequently, any and all of the + rights conveyed by this License. + +1.10. "Modifications" + + means any of the following: + + a. any file in Source Code Form that results from an addition to, + deletion from, or modification of the contents of Covered Software; or + + b. any new file in Source Code Form that contains any Covered Software. + +1.11. "Patent Claims" of a Contributor + + means any patent claim(s), including without limitation, method, + process, and apparatus claims, in any patent Licensable by such + Contributor that would be infringed, but for the grant of the License, + by the making, using, selling, offering for sale, having made, import, + or transfer of either its Contributions or its Contributor Version. + +1.12. "Secondary License" + + means either the GNU General Public License, Version 2.0, the GNU Lesser + General Public License, Version 2.1, the GNU Affero General Public + License, Version 3.0, or any later versions of those licenses. + +1.13. "Source Code Form" + + means the form of the work preferred for making modifications. + +1.14. "You" (or "Your") + + means an individual or a legal entity exercising rights under this + License. For legal entities, "You" includes any entity that controls, is + controlled by, or is under common control with You. For purposes of this + definition, "control" means (a) the power, direct or indirect, to cause + the direction or management of such entity, whether by contract or + otherwise, or (b) ownership of more than fifty percent (50%) of the + outstanding shares or beneficial ownership of such entity. + + +2. License Grants and Conditions + +2.1. Grants + + Each Contributor hereby grants You a world-wide, royalty-free, + non-exclusive license: + + a. under intellectual property rights (other than patent or trademark) + Licensable by such Contributor to use, reproduce, make available, + modify, display, perform, distribute, and otherwise exploit its + Contributions, either on an unmodified basis, with Modifications, or + as part of a Larger Work; and + + b. under Patent Claims of such Contributor to make, use, sell, offer for + sale, have made, import, and otherwise transfer either its + Contributions or its Contributor Version. + +2.2. Effective Date + + The licenses granted in Section 2.1 with respect to any Contribution + become effective for each Contribution on the date the Contributor first + distributes such Contribution. + +2.3. Limitations on Grant Scope + + The licenses granted in this Section 2 are the only rights granted under + this License. No additional rights or licenses will be implied from the + distribution or licensing of Covered Software under this License. + Notwithstanding Section 2.1(b) above, no patent license is granted by a + Contributor: + + a. for any code that a Contributor has removed from Covered Software; or + + b. for infringements caused by: (i) Your and any other third party's + modifications of Covered Software, or (ii) the combination of its + Contributions with other software (except as part of its Contributor + Version); or + + c. under Patent Claims infringed by Covered Software in the absence of + its Contributions. + + This License does not grant any rights in the trademarks, service marks, + or logos of any Contributor (except as may be necessary to comply with + the notice requirements in Section 3.4). + +2.4. Subsequent Licenses + + No Contributor makes additional grants as a result of Your choice to + distribute the Covered Software under a subsequent version of this + License (see Section 10.2) or under the terms of a Secondary License (if + permitted under the terms of Section 3.3). + +2.5. Representation + + Each Contributor represents that the Contributor believes its + Contributions are its original creation(s) or it has sufficient rights to + grant the rights to its Contributions conveyed by this License. + +2.6. Fair Use + + This License is not intended to limit any rights You have under + applicable copyright doctrines of fair use, fair dealing, or other + equivalents. + +2.7. Conditions + + Sections 3.1, 3.2, 3.3, and 3.4 are conditions of the licenses granted in + Section 2.1. + + +3. Responsibilities + +3.1. Distribution of Source Form + + All distribution of Covered Software in Source Code Form, including any + Modifications that You create or to which You contribute, must be under + the terms of this License. You must inform recipients that the Source + Code Form of the Covered Software is governed by the terms of this + License, and how they can obtain a copy of this License. You may not + attempt to alter or restrict the recipients' rights in the Source Code + Form. + +3.2. Distribution of Executable Form + + If You distribute Covered Software in Executable Form then: + + a. such Covered Software must also be made available in Source Code Form, + as described in Section 3.1, and You must inform recipients of the + Executable Form how they can obtain a copy of such Source Code Form by + reasonable means in a timely manner, at a charge no more than the cost + of distribution to the recipient; and + + b. You may distribute such Executable Form under the terms of this + License, or sublicense it under different terms, provided that the + license for the Executable Form does not attempt to limit or alter the + recipients' rights in the Source Code Form under this License. + +3.3. Distribution of a Larger Work + + You may create and distribute a Larger Work under terms of Your choice, + provided that You also comply with the requirements of this License for + the Covered Software. If the Larger Work is a combination of Covered + Software with a work governed by one or more Secondary Licenses, and the + Covered Software is not Incompatible With Secondary Licenses, this + License permits You to additionally distribute such Covered Software + under the terms of such Secondary License(s), so that the recipient of + the Larger Work may, at their option, further distribute the Covered + Software under the terms of either this License or such Secondary + License(s). + +3.4. Notices + + You may not remove or alter the substance of any license notices + (including copyright notices, patent notices, disclaimers of warranty, or + limitations of liability) contained within the Source Code Form of the + Covered Software, except that You may alter any license notices to the + extent required to remedy known factual inaccuracies. + +3.5. Application of Additional Terms + + You may choose to offer, and to charge a fee for, warranty, support, + indemnity or liability obligations to one or more recipients of Covered + Software. However, You may do so only on Your own behalf, and not on + behalf of any Contributor. You must make it absolutely clear that any + such warranty, support, indemnity, or liability obligation is offered by + You alone, and You hereby agree to indemnify every Contributor for any + liability incurred by such Contributor as a result of warranty, support, + indemnity or liability terms You offer. You may include additional + disclaimers of warranty and limitations of liability specific to any + jurisdiction. + +4. Inability to Comply Due to Statute or Regulation + + If it is impossible for You to comply with any of the terms of this License + with respect to some or all of the Covered Software due to statute, + judicial order, or regulation then You must: (a) comply with the terms of + this License to the maximum extent possible; and (b) describe the + limitations and the code they affect. Such description must be placed in a + text file included with all distributions of the Covered Software under + this License. Except to the extent prohibited by statute or regulation, + such description must be sufficiently detailed for a recipient of ordinary + skill to be able to understand it. + +5. Termination + +5.1. The rights granted under this License will terminate automatically if You + fail to comply with any of its terms. However, if You become compliant, + then the rights granted under this License from a particular Contributor + are reinstated (a) provisionally, unless and until such Contributor + explicitly and finally terminates Your grants, and (b) on an ongoing + basis, if such Contributor fails to notify You of the non-compliance by + some reasonable means prior to 60 days after You have come back into + compliance. Moreover, Your grants from a particular Contributor are + reinstated on an ongoing basis if such Contributor notifies You of the + non-compliance by some reasonable means, this is the first time You have + received notice of non-compliance with this License from such + Contributor, and You become compliant prior to 30 days after Your receipt + of the notice. + +5.2. If You initiate litigation against any entity by asserting a patent + infringement claim (excluding declaratory judgment actions, + counter-claims, and cross-claims) alleging that a Contributor Version + directly or indirectly infringes any patent, then the rights granted to + You by any and all Contributors for the Covered Software under Section + 2.1 of this License shall terminate. + +5.3. In the event of termination under Sections 5.1 or 5.2 above, all end user + license agreements (excluding distributors and resellers) which have been + validly granted by You or Your distributors under this License prior to + termination shall survive termination. + +6. Disclaimer of Warranty + + Covered Software is provided under this License on an "as is" basis, + without warranty of any kind, either expressed, implied, or statutory, + including, without limitation, warranties that the Covered Software is free + of defects, merchantable, fit for a particular purpose or non-infringing. + The entire risk as to the quality and performance of the Covered Software + is with You. Should any Covered Software prove defective in any respect, + You (not any Contributor) assume the cost of any necessary servicing, + repair, or correction. This disclaimer of warranty constitutes an essential + part of this License. No use of any Covered Software is authorized under + this License except under this disclaimer. + +7. Limitation of Liability + + Under no circumstances and under no legal theory, whether tort (including + negligence), contract, or otherwise, shall any Contributor, or anyone who + distributes Covered Software as permitted above, be liable to You for any + direct, indirect, special, incidental, or consequential damages of any + character including, without limitation, damages for lost profits, loss of + goodwill, work stoppage, computer failure or malfunction, or any and all + other commercial damages or losses, even if such party shall have been + informed of the possibility of such damages. This limitation of liability + shall not apply to liability for death or personal injury resulting from + such party's negligence to the extent applicable law prohibits such + limitation. Some jurisdictions do not allow the exclusion or limitation of + incidental or consequential damages, so this exclusion and limitation may + not apply to You. + +8. Litigation + + Any litigation relating to this License may be brought only in the courts + of a jurisdiction where the defendant maintains its principal place of + business and such litigation shall be governed by laws of that + jurisdiction, without reference to its conflict-of-law provisions. Nothing + in this Section shall prevent a party's ability to bring cross-claims or + counter-claims. + +9. Miscellaneous + + This License represents the complete agreement concerning the subject + matter hereof. If any provision of this License is held to be + unenforceable, such provision shall be reformed only to the extent + necessary to make it enforceable. Any law or regulation which provides that + the language of a contract shall be construed against the drafter shall not + be used to construe this License against a Contributor. + + +10. Versions of the License + +10.1. New Versions + + Mozilla Foundation is the license steward. Except as provided in Section + 10.3, no one other than the license steward has the right to modify or + publish new versions of this License. Each version will be given a + distinguishing version number. + +10.2. Effect of New Versions + + You may distribute the Covered Software under the terms of the version + of the License under which You originally received the Covered Software, + or under the terms of any subsequent version published by the license + steward. + +10.3. Modified Versions + + If you create software not governed by this License, and you want to + create a new license for such software, you may create and use a + modified version of this License if you rename the license and remove + any references to the name of the license steward (except to note that + such modified license differs from this License). + +10.4. Distributing Source Code Form that is Incompatible With Secondary + Licenses If You choose to distribute Source Code Form that is + Incompatible With Secondary Licenses under the terms of this version of + the License, the notice described in Exhibit B of this License must be + attached. + +Exhibit A - Source Code Form License Notice + + This Source Code Form is subject to the + terms of the Mozilla Public License, v. + 2.0. If a copy of the MPL was not + distributed with this file, You can + obtain one at + http://mozilla.org/MPL/2.0/. + +If it is not possible or desirable to put the notice in a particular file, +then You may include the notice in a location (such as a LICENSE file in a +relevant directory) where a recipient would be likely to look for such a +notice. + +You may add additional accurate notices of copyright ownership. + +Exhibit B - "Incompatible With Secondary Licenses" Notice + + This Source Code Form is "Incompatible + With Secondary Licenses", as defined by + the Mozilla Public License, v. 2.0. + diff --git a/vendor/github.com/hashicorp/go-cleanhttp/README.md b/vendor/github.com/hashicorp/go-cleanhttp/README.md new file mode 100644 index 00000000..036e5313 --- /dev/null +++ b/vendor/github.com/hashicorp/go-cleanhttp/README.md @@ -0,0 +1,30 @@ +# cleanhttp + +Functions for accessing "clean" Go http.Client values + +------------- + +The Go standard library contains a default `http.Client` called +`http.DefaultClient`. It is a common idiom in Go code to start with +`http.DefaultClient` and tweak it as necessary, and in fact, this is +encouraged; from the `http` package documentation: + +> The Client's Transport typically has internal state (cached TCP connections), +so Clients should be reused instead of created as needed. Clients are safe for +concurrent use by multiple goroutines. + +Unfortunately, this is a shared value, and it is not uncommon for libraries to +assume that they are free to modify it at will. With enough dependencies, it +can be very easy to encounter strange problems and race conditions due to +manipulation of this shared value across libraries and goroutines (clients are +safe for concurrent use, but writing values to the client struct itself is not +protected). + +Making things worse is the fact that a bare `http.Client` will use a default +`http.Transport` called `http.DefaultTransport`, which is another global value +that behaves the same way. So it is not simply enough to replace +`http.DefaultClient` with `&http.Client{}`. + +This repository provides some simple functions to get a "clean" `http.Client` +-- one that uses the same default values as the Go standard library, but +returns a client that does not share any state with other clients. diff --git a/vendor/github.com/hashicorp/go-cleanhttp/cleanhttp.go b/vendor/github.com/hashicorp/go-cleanhttp/cleanhttp.go new file mode 100644 index 00000000..fe28d15b --- /dev/null +++ b/vendor/github.com/hashicorp/go-cleanhttp/cleanhttp.go @@ -0,0 +1,58 @@ +package cleanhttp + +import ( + "net" + "net/http" + "runtime" + "time" +) + +// DefaultTransport returns a new http.Transport with similar default values to +// http.DefaultTransport, but with idle connections and keepalives disabled. +func DefaultTransport() *http.Transport { + transport := DefaultPooledTransport() + transport.DisableKeepAlives = true + transport.MaxIdleConnsPerHost = -1 + return transport +} + +// DefaultPooledTransport returns a new http.Transport with similar default +// values to http.DefaultTransport. Do not use this for transient transports as +// it can leak file descriptors over time. Only use this for transports that +// will be re-used for the same host(s). +func DefaultPooledTransport() *http.Transport { + transport := &http.Transport{ + Proxy: http.ProxyFromEnvironment, + DialContext: (&net.Dialer{ + Timeout: 30 * time.Second, + KeepAlive: 30 * time.Second, + DualStack: true, + }).DialContext, + MaxIdleConns: 100, + IdleConnTimeout: 90 * time.Second, + TLSHandshakeTimeout: 10 * time.Second, + ExpectContinueTimeout: 1 * time.Second, + ForceAttemptHTTP2: true, + MaxIdleConnsPerHost: runtime.GOMAXPROCS(0) + 1, + } + return transport +} + +// DefaultClient returns a new http.Client with similar default values to +// http.Client, but with a non-shared Transport, idle connections disabled, and +// keepalives disabled. +func DefaultClient() *http.Client { + return &http.Client{ + Transport: DefaultTransport(), + } +} + +// DefaultPooledClient returns a new http.Client with similar default values to +// http.Client, but with a shared Transport. Do not use this function for +// transient clients as it can leak file descriptors over time. Only use this +// for clients that will be re-used for the same host(s). +func DefaultPooledClient() *http.Client { + return &http.Client{ + Transport: DefaultPooledTransport(), + } +} diff --git a/vendor/github.com/hashicorp/go-cleanhttp/doc.go b/vendor/github.com/hashicorp/go-cleanhttp/doc.go new file mode 100644 index 00000000..05841092 --- /dev/null +++ b/vendor/github.com/hashicorp/go-cleanhttp/doc.go @@ -0,0 +1,20 @@ +// Package cleanhttp offers convenience utilities for acquiring "clean" +// http.Transport and http.Client structs. +// +// Values set on http.DefaultClient and http.DefaultTransport affect all +// callers. This can have detrimental effects, esepcially in TLS contexts, +// where client or root certificates set to talk to multiple endpoints can end +// up displacing each other, leading to hard-to-debug issues. This package +// provides non-shared http.Client and http.Transport structs to ensure that +// the configuration will not be overwritten by other parts of the application +// or dependencies. +// +// The DefaultClient and DefaultTransport functions disable idle connections +// and keepalives. Without ensuring that idle connections are closed before +// garbage collection, short-term clients/transports can leak file descriptors, +// eventually leading to "too many open files" errors. If you will be +// connecting to the same hosts repeatedly from the same client, you can use +// DefaultPooledClient to receive a client that has connection pooling +// semantics similar to http.DefaultClient. +// +package cleanhttp diff --git a/vendor/github.com/hashicorp/go-cleanhttp/handlers.go b/vendor/github.com/hashicorp/go-cleanhttp/handlers.go new file mode 100644 index 00000000..3c845dc0 --- /dev/null +++ b/vendor/github.com/hashicorp/go-cleanhttp/handlers.go @@ -0,0 +1,48 @@ +package cleanhttp + +import ( + "net/http" + "strings" + "unicode" +) + +// HandlerInput provides input options to cleanhttp's handlers +type HandlerInput struct { + ErrStatus int +} + +// PrintablePathCheckHandler is a middleware that ensures the request path +// contains only printable runes. +func PrintablePathCheckHandler(next http.Handler, input *HandlerInput) http.Handler { + // Nil-check on input to make it optional + if input == nil { + input = &HandlerInput{ + ErrStatus: http.StatusBadRequest, + } + } + + // Default to http.StatusBadRequest on error + if input.ErrStatus == 0 { + input.ErrStatus = http.StatusBadRequest + } + + return http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) { + if r != nil { + // Check URL path for non-printable characters + idx := strings.IndexFunc(r.URL.Path, func(c rune) bool { + return !unicode.IsPrint(c) + }) + + if idx != -1 { + w.WriteHeader(input.ErrStatus) + return + } + + if next != nil { + next.ServeHTTP(w, r) + } + } + + return + }) +} diff --git a/vendor/github.com/hashicorp/go-retryablehttp/.gitignore b/vendor/github.com/hashicorp/go-retryablehttp/.gitignore new file mode 100644 index 00000000..4e309e0b --- /dev/null +++ b/vendor/github.com/hashicorp/go-retryablehttp/.gitignore @@ -0,0 +1,4 @@ +.idea/ +*.iml +*.test +.vscode/ \ No newline at end of file diff --git a/vendor/github.com/hashicorp/go-retryablehttp/CHANGELOG.md b/vendor/github.com/hashicorp/go-retryablehttp/CHANGELOG.md new file mode 100644 index 00000000..33686e4d --- /dev/null +++ b/vendor/github.com/hashicorp/go-retryablehttp/CHANGELOG.md @@ -0,0 +1,9 @@ +## 0.7.4 (Jun 6, 2023) + +BUG FIXES + +- client: fixing an issue where the Content-Type header wouldn't be sent with an empty payload when using HTTP/2 [GH-194] + +## 0.7.3 (May 15, 2023) + +Initial release diff --git a/vendor/github.com/hashicorp/go-retryablehttp/CODEOWNERS b/vendor/github.com/hashicorp/go-retryablehttp/CODEOWNERS new file mode 100644 index 00000000..f8389c99 --- /dev/null +++ b/vendor/github.com/hashicorp/go-retryablehttp/CODEOWNERS @@ -0,0 +1 @@ +* @hashicorp/release-engineering \ No newline at end of file diff --git a/vendor/github.com/hashicorp/go-retryablehttp/LICENSE b/vendor/github.com/hashicorp/go-retryablehttp/LICENSE new file mode 100644 index 00000000..f4f97ee5 --- /dev/null +++ b/vendor/github.com/hashicorp/go-retryablehttp/LICENSE @@ -0,0 +1,365 @@ +Copyright (c) 2015 HashiCorp, Inc. + +Mozilla Public License, version 2.0 + +1. Definitions + +1.1. "Contributor" + + means each individual or legal entity that creates, contributes to the + creation of, or owns Covered Software. + +1.2. "Contributor Version" + + means the combination of the Contributions of others (if any) used by a + Contributor and that particular Contributor's Contribution. + +1.3. "Contribution" + + means Covered Software of a particular Contributor. + +1.4. "Covered Software" + + means Source Code Form to which the initial Contributor has attached the + notice in Exhibit A, the Executable Form of such Source Code Form, and + Modifications of such Source Code Form, in each case including portions + thereof. + +1.5. "Incompatible With Secondary Licenses" + means + + a. that the initial Contributor has attached the notice described in + Exhibit B to the Covered Software; or + + b. that the Covered Software was made available under the terms of + version 1.1 or earlier of the License, but not also under the terms of + a Secondary License. + +1.6. "Executable Form" + + means any form of the work other than Source Code Form. + +1.7. "Larger Work" + + means a work that combines Covered Software with other material, in a + separate file or files, that is not Covered Software. + +1.8. "License" + + means this document. + +1.9. "Licensable" + + means having the right to grant, to the maximum extent possible, whether + at the time of the initial grant or subsequently, any and all of the + rights conveyed by this License. + +1.10. "Modifications" + + means any of the following: + + a. any file in Source Code Form that results from an addition to, + deletion from, or modification of the contents of Covered Software; or + + b. any new file in Source Code Form that contains any Covered Software. + +1.11. "Patent Claims" of a Contributor + + means any patent claim(s), including without limitation, method, + process, and apparatus claims, in any patent Licensable by such + Contributor that would be infringed, but for the grant of the License, + by the making, using, selling, offering for sale, having made, import, + or transfer of either its Contributions or its Contributor Version. + +1.12. "Secondary License" + + means either the GNU General Public License, Version 2.0, the GNU Lesser + General Public License, Version 2.1, the GNU Affero General Public + License, Version 3.0, or any later versions of those licenses. + +1.13. "Source Code Form" + + means the form of the work preferred for making modifications. + +1.14. "You" (or "Your") + + means an individual or a legal entity exercising rights under this + License. For legal entities, "You" includes any entity that controls, is + controlled by, or is under common control with You. For purposes of this + definition, "control" means (a) the power, direct or indirect, to cause + the direction or management of such entity, whether by contract or + otherwise, or (b) ownership of more than fifty percent (50%) of the + outstanding shares or beneficial ownership of such entity. + + +2. License Grants and Conditions + +2.1. Grants + + Each Contributor hereby grants You a world-wide, royalty-free, + non-exclusive license: + + a. under intellectual property rights (other than patent or trademark) + Licensable by such Contributor to use, reproduce, make available, + modify, display, perform, distribute, and otherwise exploit its + Contributions, either on an unmodified basis, with Modifications, or + as part of a Larger Work; and + + b. under Patent Claims of such Contributor to make, use, sell, offer for + sale, have made, import, and otherwise transfer either its + Contributions or its Contributor Version. + +2.2. Effective Date + + The licenses granted in Section 2.1 with respect to any Contribution + become effective for each Contribution on the date the Contributor first + distributes such Contribution. + +2.3. Limitations on Grant Scope + + The licenses granted in this Section 2 are the only rights granted under + this License. No additional rights or licenses will be implied from the + distribution or licensing of Covered Software under this License. + Notwithstanding Section 2.1(b) above, no patent license is granted by a + Contributor: + + a. for any code that a Contributor has removed from Covered Software; or + + b. for infringements caused by: (i) Your and any other third party's + modifications of Covered Software, or (ii) the combination of its + Contributions with other software (except as part of its Contributor + Version); or + + c. under Patent Claims infringed by Covered Software in the absence of + its Contributions. + + This License does not grant any rights in the trademarks, service marks, + or logos of any Contributor (except as may be necessary to comply with + the notice requirements in Section 3.4). + +2.4. Subsequent Licenses + + No Contributor makes additional grants as a result of Your choice to + distribute the Covered Software under a subsequent version of this + License (see Section 10.2) or under the terms of a Secondary License (if + permitted under the terms of Section 3.3). + +2.5. Representation + + Each Contributor represents that the Contributor believes its + Contributions are its original creation(s) or it has sufficient rights to + grant the rights to its Contributions conveyed by this License. + +2.6. Fair Use + + This License is not intended to limit any rights You have under + applicable copyright doctrines of fair use, fair dealing, or other + equivalents. + +2.7. Conditions + + Sections 3.1, 3.2, 3.3, and 3.4 are conditions of the licenses granted in + Section 2.1. + + +3. Responsibilities + +3.1. Distribution of Source Form + + All distribution of Covered Software in Source Code Form, including any + Modifications that You create or to which You contribute, must be under + the terms of this License. You must inform recipients that the Source + Code Form of the Covered Software is governed by the terms of this + License, and how they can obtain a copy of this License. You may not + attempt to alter or restrict the recipients' rights in the Source Code + Form. + +3.2. Distribution of Executable Form + + If You distribute Covered Software in Executable Form then: + + a. such Covered Software must also be made available in Source Code Form, + as described in Section 3.1, and You must inform recipients of the + Executable Form how they can obtain a copy of such Source Code Form by + reasonable means in a timely manner, at a charge no more than the cost + of distribution to the recipient; and + + b. You may distribute such Executable Form under the terms of this + License, or sublicense it under different terms, provided that the + license for the Executable Form does not attempt to limit or alter the + recipients' rights in the Source Code Form under this License. + +3.3. Distribution of a Larger Work + + You may create and distribute a Larger Work under terms of Your choice, + provided that You also comply with the requirements of this License for + the Covered Software. If the Larger Work is a combination of Covered + Software with a work governed by one or more Secondary Licenses, and the + Covered Software is not Incompatible With Secondary Licenses, this + License permits You to additionally distribute such Covered Software + under the terms of such Secondary License(s), so that the recipient of + the Larger Work may, at their option, further distribute the Covered + Software under the terms of either this License or such Secondary + License(s). + +3.4. Notices + + You may not remove or alter the substance of any license notices + (including copyright notices, patent notices, disclaimers of warranty, or + limitations of liability) contained within the Source Code Form of the + Covered Software, except that You may alter any license notices to the + extent required to remedy known factual inaccuracies. + +3.5. Application of Additional Terms + + You may choose to offer, and to charge a fee for, warranty, support, + indemnity or liability obligations to one or more recipients of Covered + Software. However, You may do so only on Your own behalf, and not on + behalf of any Contributor. You must make it absolutely clear that any + such warranty, support, indemnity, or liability obligation is offered by + You alone, and You hereby agree to indemnify every Contributor for any + liability incurred by such Contributor as a result of warranty, support, + indemnity or liability terms You offer. You may include additional + disclaimers of warranty and limitations of liability specific to any + jurisdiction. + +4. Inability to Comply Due to Statute or Regulation + + If it is impossible for You to comply with any of the terms of this License + with respect to some or all of the Covered Software due to statute, + judicial order, or regulation then You must: (a) comply with the terms of + this License to the maximum extent possible; and (b) describe the + limitations and the code they affect. Such description must be placed in a + text file included with all distributions of the Covered Software under + this License. Except to the extent prohibited by statute or regulation, + such description must be sufficiently detailed for a recipient of ordinary + skill to be able to understand it. + +5. Termination + +5.1. The rights granted under this License will terminate automatically if You + fail to comply with any of its terms. However, if You become compliant, + then the rights granted under this License from a particular Contributor + are reinstated (a) provisionally, unless and until such Contributor + explicitly and finally terminates Your grants, and (b) on an ongoing + basis, if such Contributor fails to notify You of the non-compliance by + some reasonable means prior to 60 days after You have come back into + compliance. Moreover, Your grants from a particular Contributor are + reinstated on an ongoing basis if such Contributor notifies You of the + non-compliance by some reasonable means, this is the first time You have + received notice of non-compliance with this License from such + Contributor, and You become compliant prior to 30 days after Your receipt + of the notice. + +5.2. If You initiate litigation against any entity by asserting a patent + infringement claim (excluding declaratory judgment actions, + counter-claims, and cross-claims) alleging that a Contributor Version + directly or indirectly infringes any patent, then the rights granted to + You by any and all Contributors for the Covered Software under Section + 2.1 of this License shall terminate. + +5.3. In the event of termination under Sections 5.1 or 5.2 above, all end user + license agreements (excluding distributors and resellers) which have been + validly granted by You or Your distributors under this License prior to + termination shall survive termination. + +6. Disclaimer of Warranty + + Covered Software is provided under this License on an "as is" basis, + without warranty of any kind, either expressed, implied, or statutory, + including, without limitation, warranties that the Covered Software is free + of defects, merchantable, fit for a particular purpose or non-infringing. + The entire risk as to the quality and performance of the Covered Software + is with You. Should any Covered Software prove defective in any respect, + You (not any Contributor) assume the cost of any necessary servicing, + repair, or correction. This disclaimer of warranty constitutes an essential + part of this License. No use of any Covered Software is authorized under + this License except under this disclaimer. + +7. Limitation of Liability + + Under no circumstances and under no legal theory, whether tort (including + negligence), contract, or otherwise, shall any Contributor, or anyone who + distributes Covered Software as permitted above, be liable to You for any + direct, indirect, special, incidental, or consequential damages of any + character including, without limitation, damages for lost profits, loss of + goodwill, work stoppage, computer failure or malfunction, or any and all + other commercial damages or losses, even if such party shall have been + informed of the possibility of such damages. This limitation of liability + shall not apply to liability for death or personal injury resulting from + such party's negligence to the extent applicable law prohibits such + limitation. Some jurisdictions do not allow the exclusion or limitation of + incidental or consequential damages, so this exclusion and limitation may + not apply to You. + +8. Litigation + + Any litigation relating to this License may be brought only in the courts + of a jurisdiction where the defendant maintains its principal place of + business and such litigation shall be governed by laws of that + jurisdiction, without reference to its conflict-of-law provisions. Nothing + in this Section shall prevent a party's ability to bring cross-claims or + counter-claims. + +9. Miscellaneous + + This License represents the complete agreement concerning the subject + matter hereof. If any provision of this License is held to be + unenforceable, such provision shall be reformed only to the extent + necessary to make it enforceable. Any law or regulation which provides that + the language of a contract shall be construed against the drafter shall not + be used to construe this License against a Contributor. + + +10. Versions of the License + +10.1. New Versions + + Mozilla Foundation is the license steward. Except as provided in Section + 10.3, no one other than the license steward has the right to modify or + publish new versions of this License. Each version will be given a + distinguishing version number. + +10.2. Effect of New Versions + + You may distribute the Covered Software under the terms of the version + of the License under which You originally received the Covered Software, + or under the terms of any subsequent version published by the license + steward. + +10.3. Modified Versions + + If you create software not governed by this License, and you want to + create a new license for such software, you may create and use a + modified version of this License if you rename the license and remove + any references to the name of the license steward (except to note that + such modified license differs from this License). + +10.4. Distributing Source Code Form that is Incompatible With Secondary + Licenses If You choose to distribute Source Code Form that is + Incompatible With Secondary Licenses under the terms of this version of + the License, the notice described in Exhibit B of this License must be + attached. + +Exhibit A - Source Code Form License Notice + + This Source Code Form is subject to the + terms of the Mozilla Public License, v. + 2.0. If a copy of the MPL was not + distributed with this file, You can + obtain one at + http://mozilla.org/MPL/2.0/. + +If it is not possible or desirable to put the notice in a particular file, +then You may include the notice in a location (such as a LICENSE file in a +relevant directory) where a recipient would be likely to look for such a +notice. + +You may add additional accurate notices of copyright ownership. + +Exhibit B - "Incompatible With Secondary Licenses" Notice + + This Source Code Form is "Incompatible + With Secondary Licenses", as defined by + the Mozilla Public License, v. 2.0. + diff --git a/vendor/github.com/hashicorp/go-retryablehttp/Makefile b/vendor/github.com/hashicorp/go-retryablehttp/Makefile new file mode 100644 index 00000000..da17640e --- /dev/null +++ b/vendor/github.com/hashicorp/go-retryablehttp/Makefile @@ -0,0 +1,11 @@ +default: test + +test: + go vet ./... + go test -race ./... + +updatedeps: + go get -f -t -u ./... + go get -f -u ./... + +.PHONY: default test updatedeps diff --git a/vendor/github.com/hashicorp/go-retryablehttp/README.md b/vendor/github.com/hashicorp/go-retryablehttp/README.md new file mode 100644 index 00000000..8943becf --- /dev/null +++ b/vendor/github.com/hashicorp/go-retryablehttp/README.md @@ -0,0 +1,62 @@ +go-retryablehttp +================ + +[![Build Status](http://img.shields.io/travis/hashicorp/go-retryablehttp.svg?style=flat-square)][travis] +[![Go Documentation](http://img.shields.io/badge/go-documentation-blue.svg?style=flat-square)][godocs] + +[travis]: http://travis-ci.org/hashicorp/go-retryablehttp +[godocs]: http://godoc.org/github.com/hashicorp/go-retryablehttp + +The `retryablehttp` package provides a familiar HTTP client interface with +automatic retries and exponential backoff. It is a thin wrapper over the +standard `net/http` client library and exposes nearly the same public API. This +makes `retryablehttp` very easy to drop into existing programs. + +`retryablehttp` performs automatic retries under certain conditions. Mainly, if +an error is returned by the client (connection errors, etc.), or if a 500-range +response code is received (except 501), then a retry is invoked after a wait +period. Otherwise, the response is returned and left to the caller to +interpret. + +The main difference from `net/http` is that requests which take a request body +(POST/PUT et. al) can have the body provided in a number of ways (some more or +less efficient) that allow "rewinding" the request body if the initial request +fails so that the full request can be attempted again. See the +[godoc](http://godoc.org/github.com/hashicorp/go-retryablehttp) for more +details. + +Version 0.6.0 and before are compatible with Go prior to 1.12. From 0.6.1 onward, Go 1.12+ is required. +From 0.6.7 onward, Go 1.13+ is required. + +Example Use +=========== + +Using this library should look almost identical to what you would do with +`net/http`. The most simple example of a GET request is shown below: + +```go +resp, err := retryablehttp.Get("/foo") +if err != nil { + panic(err) +} +``` + +The returned response object is an `*http.Response`, the same thing you would +usually get from `net/http`. Had the request failed one or more times, the above +call would block and retry with exponential backoff. + +## Getting a stdlib `*http.Client` with retries + +It's possible to convert a `*retryablehttp.Client` directly to a `*http.Client`. +This makes use of retryablehttp broadly applicable with minimal effort. Simply +configure a `*retryablehttp.Client` as you wish, and then call `StandardClient()`: + +```go +retryClient := retryablehttp.NewClient() +retryClient.RetryMax = 10 + +standardClient := retryClient.StandardClient() // *http.Client +``` + +For more usage and examples see the +[godoc](http://godoc.org/github.com/hashicorp/go-retryablehttp). diff --git a/vendor/github.com/hashicorp/go-retryablehttp/client.go b/vendor/github.com/hashicorp/go-retryablehttp/client.go new file mode 100644 index 00000000..cad96bd9 --- /dev/null +++ b/vendor/github.com/hashicorp/go-retryablehttp/client.go @@ -0,0 +1,832 @@ +// Copyright (c) HashiCorp, Inc. +// SPDX-License-Identifier: MPL-2.0 + +// Package retryablehttp provides a familiar HTTP client interface with +// automatic retries and exponential backoff. It is a thin wrapper over the +// standard net/http client library and exposes nearly the same public API. +// This makes retryablehttp very easy to drop into existing programs. +// +// retryablehttp performs automatic retries under certain conditions. Mainly, if +// an error is returned by the client (connection errors etc), or if a 500-range +// response is received, then a retry is invoked. Otherwise, the response is +// returned and left to the caller to interpret. +// +// Requests which take a request body should provide a non-nil function +// parameter. The best choice is to provide either a function satisfying +// ReaderFunc which provides multiple io.Readers in an efficient manner, a +// *bytes.Buffer (the underlying raw byte slice will be used) or a raw byte +// slice. As it is a reference type, and we will wrap it as needed by readers, +// we can efficiently re-use the request body without needing to copy it. If an +// io.Reader (such as a *bytes.Reader) is provided, the full body will be read +// prior to the first request, and will be efficiently re-used for any retries. +// ReadSeeker can be used, but some users have observed occasional data races +// between the net/http library and the Seek functionality of some +// implementations of ReadSeeker, so should be avoided if possible. +package retryablehttp + +import ( + "bytes" + "context" + "crypto/x509" + "fmt" + "io" + "io/ioutil" + "log" + "math" + "math/rand" + "net/http" + "net/url" + "os" + "regexp" + "strconv" + "strings" + "sync" + "time" + + cleanhttp "github.com/hashicorp/go-cleanhttp" +) + +var ( + // Default retry configuration + defaultRetryWaitMin = 1 * time.Second + defaultRetryWaitMax = 30 * time.Second + defaultRetryMax = 4 + + // defaultLogger is the logger provided with defaultClient + defaultLogger = log.New(os.Stderr, "", log.LstdFlags) + + // defaultClient is used for performing requests without explicitly making + // a new client. It is purposely private to avoid modifications. + defaultClient = NewClient() + + // We need to consume response bodies to maintain http connections, but + // limit the size we consume to respReadLimit. + respReadLimit = int64(4096) + + // A regular expression to match the error returned by net/http when the + // configured number of redirects is exhausted. This error isn't typed + // specifically so we resort to matching on the error string. + redirectsErrorRe = regexp.MustCompile(`stopped after \d+ redirects\z`) + + // A regular expression to match the error returned by net/http when the + // scheme specified in the URL is invalid. This error isn't typed + // specifically so we resort to matching on the error string. + schemeErrorRe = regexp.MustCompile(`unsupported protocol scheme`) + + // A regular expression to match the error returned by net/http when the + // TLS certificate is not trusted. This error isn't typed + // specifically so we resort to matching on the error string. + notTrustedErrorRe = regexp.MustCompile(`certificate is not trusted`) +) + +// ReaderFunc is the type of function that can be given natively to NewRequest +type ReaderFunc func() (io.Reader, error) + +// ResponseHandlerFunc is a type of function that takes in a Response, and does something with it. +// The ResponseHandlerFunc is called when the HTTP client successfully receives a response and the +// CheckRetry function indicates that a retry of the base request is not necessary. +// If an error is returned from this function, the CheckRetry policy will be used to determine +// whether to retry the whole request (including this handler). +// +// Make sure to check status codes! Even if the request was completed it may have a non-2xx status code. +// +// The response body is not automatically closed. It must be closed either by the ResponseHandlerFunc or +// by the caller out-of-band. Failure to do so will result in a memory leak. +type ResponseHandlerFunc func(*http.Response) error + +// LenReader is an interface implemented by many in-memory io.Reader's. Used +// for automatically sending the right Content-Length header when possible. +type LenReader interface { + Len() int +} + +// Request wraps the metadata needed to create HTTP requests. +type Request struct { + // body is a seekable reader over the request body payload. This is + // used to rewind the request data in between retries. + body ReaderFunc + + responseHandler ResponseHandlerFunc + + // Embed an HTTP request directly. This makes a *Request act exactly + // like an *http.Request so that all meta methods are supported. + *http.Request +} + +// WithContext returns wrapped Request with a shallow copy of underlying *http.Request +// with its context changed to ctx. The provided ctx must be non-nil. +func (r *Request) WithContext(ctx context.Context) *Request { + return &Request{ + body: r.body, + responseHandler: r.responseHandler, + Request: r.Request.WithContext(ctx), + } +} + +// SetResponseHandler allows setting the response handler. +func (r *Request) SetResponseHandler(fn ResponseHandlerFunc) { + r.responseHandler = fn +} + +// BodyBytes allows accessing the request body. It is an analogue to +// http.Request's Body variable, but it returns a copy of the underlying data +// rather than consuming it. +// +// This function is not thread-safe; do not call it at the same time as another +// call, or at the same time this request is being used with Client.Do. +func (r *Request) BodyBytes() ([]byte, error) { + if r.body == nil { + return nil, nil + } + body, err := r.body() + if err != nil { + return nil, err + } + buf := new(bytes.Buffer) + _, err = buf.ReadFrom(body) + if err != nil { + return nil, err + } + return buf.Bytes(), nil +} + +// SetBody allows setting the request body. +// +// It is useful if a new body needs to be set without constructing a new Request. +func (r *Request) SetBody(rawBody interface{}) error { + bodyReader, contentLength, err := getBodyReaderAndContentLength(rawBody) + if err != nil { + return err + } + r.body = bodyReader + r.ContentLength = contentLength + return nil +} + +// WriteTo allows copying the request body into a writer. +// +// It writes data to w until there's no more data to write or +// when an error occurs. The return int64 value is the number of bytes +// written. Any error encountered during the write is also returned. +// The signature matches io.WriterTo interface. +func (r *Request) WriteTo(w io.Writer) (int64, error) { + body, err := r.body() + if err != nil { + return 0, err + } + if c, ok := body.(io.Closer); ok { + defer c.Close() + } + return io.Copy(w, body) +} + +func getBodyReaderAndContentLength(rawBody interface{}) (ReaderFunc, int64, error) { + var bodyReader ReaderFunc + var contentLength int64 + + switch body := rawBody.(type) { + // If they gave us a function already, great! Use it. + case ReaderFunc: + bodyReader = body + tmp, err := body() + if err != nil { + return nil, 0, err + } + if lr, ok := tmp.(LenReader); ok { + contentLength = int64(lr.Len()) + } + if c, ok := tmp.(io.Closer); ok { + c.Close() + } + + case func() (io.Reader, error): + bodyReader = body + tmp, err := body() + if err != nil { + return nil, 0, err + } + if lr, ok := tmp.(LenReader); ok { + contentLength = int64(lr.Len()) + } + if c, ok := tmp.(io.Closer); ok { + c.Close() + } + + // If a regular byte slice, we can read it over and over via new + // readers + case []byte: + buf := body + bodyReader = func() (io.Reader, error) { + return bytes.NewReader(buf), nil + } + contentLength = int64(len(buf)) + + // If a bytes.Buffer we can read the underlying byte slice over and + // over + case *bytes.Buffer: + buf := body + bodyReader = func() (io.Reader, error) { + return bytes.NewReader(buf.Bytes()), nil + } + contentLength = int64(buf.Len()) + + // We prioritize *bytes.Reader here because we don't really want to + // deal with it seeking so want it to match here instead of the + // io.ReadSeeker case. + case *bytes.Reader: + buf, err := ioutil.ReadAll(body) + if err != nil { + return nil, 0, err + } + bodyReader = func() (io.Reader, error) { + return bytes.NewReader(buf), nil + } + contentLength = int64(len(buf)) + + // Compat case + case io.ReadSeeker: + raw := body + bodyReader = func() (io.Reader, error) { + _, err := raw.Seek(0, 0) + return ioutil.NopCloser(raw), err + } + if lr, ok := raw.(LenReader); ok { + contentLength = int64(lr.Len()) + } + + // Read all in so we can reset + case io.Reader: + buf, err := ioutil.ReadAll(body) + if err != nil { + return nil, 0, err + } + if len(buf) == 0 { + bodyReader = func() (io.Reader, error) { + return http.NoBody, nil + } + contentLength = 0 + } else { + bodyReader = func() (io.Reader, error) { + return bytes.NewReader(buf), nil + } + contentLength = int64(len(buf)) + } + + // No body provided, nothing to do + case nil: + + // Unrecognized type + default: + return nil, 0, fmt.Errorf("cannot handle type %T", rawBody) + } + return bodyReader, contentLength, nil +} + +// FromRequest wraps an http.Request in a retryablehttp.Request +func FromRequest(r *http.Request) (*Request, error) { + bodyReader, _, err := getBodyReaderAndContentLength(r.Body) + if err != nil { + return nil, err + } + // Could assert contentLength == r.ContentLength + return &Request{body: bodyReader, Request: r}, nil +} + +// NewRequest creates a new wrapped request. +func NewRequest(method, url string, rawBody interface{}) (*Request, error) { + return NewRequestWithContext(context.Background(), method, url, rawBody) +} + +// NewRequestWithContext creates a new wrapped request with the provided context. +// +// The context controls the entire lifetime of a request and its response: +// obtaining a connection, sending the request, and reading the response headers and body. +func NewRequestWithContext(ctx context.Context, method, url string, rawBody interface{}) (*Request, error) { + bodyReader, contentLength, err := getBodyReaderAndContentLength(rawBody) + if err != nil { + return nil, err + } + + httpReq, err := http.NewRequestWithContext(ctx, method, url, nil) + if err != nil { + return nil, err + } + httpReq.ContentLength = contentLength + + return &Request{body: bodyReader, Request: httpReq}, nil +} + +// Logger interface allows to use other loggers than +// standard log.Logger. +type Logger interface { + Printf(string, ...interface{}) +} + +// LeveledLogger is an interface that can be implemented by any logger or a +// logger wrapper to provide leveled logging. The methods accept a message +// string and a variadic number of key-value pairs. For log.Printf style +// formatting where message string contains a format specifier, use Logger +// interface. +type LeveledLogger interface { + Error(msg string, keysAndValues ...interface{}) + Info(msg string, keysAndValues ...interface{}) + Debug(msg string, keysAndValues ...interface{}) + Warn(msg string, keysAndValues ...interface{}) +} + +// hookLogger adapts an LeveledLogger to Logger for use by the existing hook functions +// without changing the API. +type hookLogger struct { + LeveledLogger +} + +func (h hookLogger) Printf(s string, args ...interface{}) { + h.Info(fmt.Sprintf(s, args...)) +} + +// RequestLogHook allows a function to run before each retry. The HTTP +// request which will be made, and the retry number (0 for the initial +// request) are available to users. The internal logger is exposed to +// consumers. +type RequestLogHook func(Logger, *http.Request, int) + +// ResponseLogHook is like RequestLogHook, but allows running a function +// on each HTTP response. This function will be invoked at the end of +// every HTTP request executed, regardless of whether a subsequent retry +// needs to be performed or not. If the response body is read or closed +// from this method, this will affect the response returned from Do(). +type ResponseLogHook func(Logger, *http.Response) + +// CheckRetry specifies a policy for handling retries. It is called +// following each request with the response and error values returned by +// the http.Client. If CheckRetry returns false, the Client stops retrying +// and returns the response to the caller. If CheckRetry returns an error, +// that error value is returned in lieu of the error from the request. The +// Client will close any response body when retrying, but if the retry is +// aborted it is up to the CheckRetry callback to properly close any +// response body before returning. +type CheckRetry func(ctx context.Context, resp *http.Response, err error) (bool, error) + +// Backoff specifies a policy for how long to wait between retries. +// It is called after a failing request to determine the amount of time +// that should pass before trying again. +type Backoff func(min, max time.Duration, attemptNum int, resp *http.Response) time.Duration + +// ErrorHandler is called if retries are expired, containing the last status +// from the http library. If not specified, default behavior for the library is +// to close the body and return an error indicating how many tries were +// attempted. If overriding this, be sure to close the body if needed. +type ErrorHandler func(resp *http.Response, err error, numTries int) (*http.Response, error) + +// Client is used to make HTTP requests. It adds additional functionality +// like automatic retries to tolerate minor outages. +type Client struct { + HTTPClient *http.Client // Internal HTTP client. + Logger interface{} // Customer logger instance. Can be either Logger or LeveledLogger + + RetryWaitMin time.Duration // Minimum time to wait + RetryWaitMax time.Duration // Maximum time to wait + RetryMax int // Maximum number of retries + + // RequestLogHook allows a user-supplied function to be called + // before each retry. + RequestLogHook RequestLogHook + + // ResponseLogHook allows a user-supplied function to be called + // with the response from each HTTP request executed. + ResponseLogHook ResponseLogHook + + // CheckRetry specifies the policy for handling retries, and is called + // after each request. The default policy is DefaultRetryPolicy. + CheckRetry CheckRetry + + // Backoff specifies the policy for how long to wait between retries + Backoff Backoff + + // ErrorHandler specifies the custom error handler to use, if any + ErrorHandler ErrorHandler + + loggerInit sync.Once + clientInit sync.Once +} + +// NewClient creates a new Client with default settings. +func NewClient() *Client { + return &Client{ + HTTPClient: cleanhttp.DefaultPooledClient(), + Logger: defaultLogger, + RetryWaitMin: defaultRetryWaitMin, + RetryWaitMax: defaultRetryWaitMax, + RetryMax: defaultRetryMax, + CheckRetry: DefaultRetryPolicy, + Backoff: DefaultBackoff, + } +} + +func (c *Client) logger() interface{} { + c.loggerInit.Do(func() { + if c.Logger == nil { + return + } + + switch c.Logger.(type) { + case Logger, LeveledLogger: + // ok + default: + // This should happen in dev when they are setting Logger and work on code, not in prod. + panic(fmt.Sprintf("invalid logger type passed, must be Logger or LeveledLogger, was %T", c.Logger)) + } + }) + + return c.Logger +} + +// DefaultRetryPolicy provides a default callback for Client.CheckRetry, which +// will retry on connection errors and server errors. +func DefaultRetryPolicy(ctx context.Context, resp *http.Response, err error) (bool, error) { + // do not retry on context.Canceled or context.DeadlineExceeded + if ctx.Err() != nil { + return false, ctx.Err() + } + + // don't propagate other errors + shouldRetry, _ := baseRetryPolicy(resp, err) + return shouldRetry, nil +} + +// ErrorPropagatedRetryPolicy is the same as DefaultRetryPolicy, except it +// propagates errors back instead of returning nil. This allows you to inspect +// why it decided to retry or not. +func ErrorPropagatedRetryPolicy(ctx context.Context, resp *http.Response, err error) (bool, error) { + // do not retry on context.Canceled or context.DeadlineExceeded + if ctx.Err() != nil { + return false, ctx.Err() + } + + return baseRetryPolicy(resp, err) +} + +func baseRetryPolicy(resp *http.Response, err error) (bool, error) { + if err != nil { + if v, ok := err.(*url.Error); ok { + // Don't retry if the error was due to too many redirects. + if redirectsErrorRe.MatchString(v.Error()) { + return false, v + } + + // Don't retry if the error was due to an invalid protocol scheme. + if schemeErrorRe.MatchString(v.Error()) { + return false, v + } + + // Don't retry if the error was due to TLS cert verification failure. + if notTrustedErrorRe.MatchString(v.Error()) { + return false, v + } + if _, ok := v.Err.(x509.UnknownAuthorityError); ok { + return false, v + } + } + + // The error is likely recoverable so retry. + return true, nil + } + + // 429 Too Many Requests is recoverable. Sometimes the server puts + // a Retry-After response header to indicate when the server is + // available to start processing request from client. + if resp.StatusCode == http.StatusTooManyRequests { + return true, nil + } + + // Check the response code. We retry on 500-range responses to allow + // the server time to recover, as 500's are typically not permanent + // errors and may relate to outages on the server side. This will catch + // invalid response codes as well, like 0 and 999. + if resp.StatusCode == 0 || (resp.StatusCode >= 500 && resp.StatusCode != http.StatusNotImplemented) { + return true, fmt.Errorf("unexpected HTTP status %s", resp.Status) + } + + return false, nil +} + +// DefaultBackoff provides a default callback for Client.Backoff which +// will perform exponential backoff based on the attempt number and limited +// by the provided minimum and maximum durations. +// +// It also tries to parse Retry-After response header when a http.StatusTooManyRequests +// (HTTP Code 429) is found in the resp parameter. Hence it will return the number of +// seconds the server states it may be ready to process more requests from this client. +func DefaultBackoff(min, max time.Duration, attemptNum int, resp *http.Response) time.Duration { + if resp != nil { + if resp.StatusCode == http.StatusTooManyRequests || resp.StatusCode == http.StatusServiceUnavailable { + if s, ok := resp.Header["Retry-After"]; ok { + if sleep, err := strconv.ParseInt(s[0], 10, 64); err == nil { + return time.Second * time.Duration(sleep) + } + } + } + } + + mult := math.Pow(2, float64(attemptNum)) * float64(min) + sleep := time.Duration(mult) + if float64(sleep) != mult || sleep > max { + sleep = max + } + return sleep +} + +// LinearJitterBackoff provides a callback for Client.Backoff which will +// perform linear backoff based on the attempt number and with jitter to +// prevent a thundering herd. +// +// min and max here are *not* absolute values. The number to be multiplied by +// the attempt number will be chosen at random from between them, thus they are +// bounding the jitter. +// +// For instance: +// * To get strictly linear backoff of one second increasing each retry, set +// both to one second (1s, 2s, 3s, 4s, ...) +// * To get a small amount of jitter centered around one second increasing each +// retry, set to around one second, such as a min of 800ms and max of 1200ms +// (892ms, 2102ms, 2945ms, 4312ms, ...) +// * To get extreme jitter, set to a very wide spread, such as a min of 100ms +// and a max of 20s (15382ms, 292ms, 51321ms, 35234ms, ...) +func LinearJitterBackoff(min, max time.Duration, attemptNum int, resp *http.Response) time.Duration { + // attemptNum always starts at zero but we want to start at 1 for multiplication + attemptNum++ + + if max <= min { + // Unclear what to do here, or they are the same, so return min * + // attemptNum + return min * time.Duration(attemptNum) + } + + // Seed rand; doing this every time is fine + rand := rand.New(rand.NewSource(int64(time.Now().Nanosecond()))) + + // Pick a random number that lies somewhere between the min and max and + // multiply by the attemptNum. attemptNum starts at zero so we always + // increment here. We first get a random percentage, then apply that to the + // difference between min and max, and add to min. + jitter := rand.Float64() * float64(max-min) + jitterMin := int64(jitter) + int64(min) + return time.Duration(jitterMin * int64(attemptNum)) +} + +// PassthroughErrorHandler is an ErrorHandler that directly passes through the +// values from the net/http library for the final request. The body is not +// closed. +func PassthroughErrorHandler(resp *http.Response, err error, _ int) (*http.Response, error) { + return resp, err +} + +// Do wraps calling an HTTP method with retries. +func (c *Client) Do(req *Request) (*http.Response, error) { + c.clientInit.Do(func() { + if c.HTTPClient == nil { + c.HTTPClient = cleanhttp.DefaultPooledClient() + } + }) + + logger := c.logger() + + if logger != nil { + switch v := logger.(type) { + case LeveledLogger: + v.Debug("performing request", "method", req.Method, "url", req.URL) + case Logger: + v.Printf("[DEBUG] %s %s", req.Method, req.URL) + } + } + + var resp *http.Response + var attempt int + var shouldRetry bool + var doErr, respErr, checkErr error + + for i := 0; ; i++ { + doErr, respErr = nil, nil + attempt++ + + // Always rewind the request body when non-nil. + if req.body != nil { + body, err := req.body() + if err != nil { + c.HTTPClient.CloseIdleConnections() + return resp, err + } + if c, ok := body.(io.ReadCloser); ok { + req.Body = c + } else { + req.Body = ioutil.NopCloser(body) + } + } + + if c.RequestLogHook != nil { + switch v := logger.(type) { + case LeveledLogger: + c.RequestLogHook(hookLogger{v}, req.Request, i) + case Logger: + c.RequestLogHook(v, req.Request, i) + default: + c.RequestLogHook(nil, req.Request, i) + } + } + + // Attempt the request + resp, doErr = c.HTTPClient.Do(req.Request) + + // Check if we should continue with retries. + shouldRetry, checkErr = c.CheckRetry(req.Context(), resp, doErr) + if !shouldRetry && doErr == nil && req.responseHandler != nil { + respErr = req.responseHandler(resp) + shouldRetry, checkErr = c.CheckRetry(req.Context(), resp, respErr) + } + + err := doErr + if respErr != nil { + err = respErr + } + if err != nil { + switch v := logger.(type) { + case LeveledLogger: + v.Error("request failed", "error", err, "method", req.Method, "url", req.URL) + case Logger: + v.Printf("[ERR] %s %s request failed: %v", req.Method, req.URL, err) + } + } else { + // Call this here to maintain the behavior of logging all requests, + // even if CheckRetry signals to stop. + if c.ResponseLogHook != nil { + // Call the response logger function if provided. + switch v := logger.(type) { + case LeveledLogger: + c.ResponseLogHook(hookLogger{v}, resp) + case Logger: + c.ResponseLogHook(v, resp) + default: + c.ResponseLogHook(nil, resp) + } + } + } + + if !shouldRetry { + break + } + + // We do this before drainBody because there's no need for the I/O if + // we're breaking out + remain := c.RetryMax - i + if remain <= 0 { + break + } + + // We're going to retry, consume any response to reuse the connection. + if doErr == nil { + c.drainBody(resp.Body) + } + + wait := c.Backoff(c.RetryWaitMin, c.RetryWaitMax, i, resp) + if logger != nil { + desc := fmt.Sprintf("%s %s", req.Method, req.URL) + if resp != nil { + desc = fmt.Sprintf("%s (status: %d)", desc, resp.StatusCode) + } + switch v := logger.(type) { + case LeveledLogger: + v.Debug("retrying request", "request", desc, "timeout", wait, "remaining", remain) + case Logger: + v.Printf("[DEBUG] %s: retrying in %s (%d left)", desc, wait, remain) + } + } + timer := time.NewTimer(wait) + select { + case <-req.Context().Done(): + timer.Stop() + c.HTTPClient.CloseIdleConnections() + return nil, req.Context().Err() + case <-timer.C: + } + + // Make shallow copy of http Request so that we can modify its body + // without racing against the closeBody call in persistConn.writeLoop. + httpreq := *req.Request + req.Request = &httpreq + } + + // this is the closest we have to success criteria + if doErr == nil && respErr == nil && checkErr == nil && !shouldRetry { + return resp, nil + } + + defer c.HTTPClient.CloseIdleConnections() + + var err error + if checkErr != nil { + err = checkErr + } else if respErr != nil { + err = respErr + } else { + err = doErr + } + + if c.ErrorHandler != nil { + return c.ErrorHandler(resp, err, attempt) + } + + // By default, we close the response body and return an error without + // returning the response + if resp != nil { + c.drainBody(resp.Body) + } + + // this means CheckRetry thought the request was a failure, but didn't + // communicate why + if err == nil { + return nil, fmt.Errorf("%s %s giving up after %d attempt(s)", + req.Method, req.URL, attempt) + } + + return nil, fmt.Errorf("%s %s giving up after %d attempt(s): %w", + req.Method, req.URL, attempt, err) +} + +// Try to read the response body so we can reuse this connection. +func (c *Client) drainBody(body io.ReadCloser) { + defer body.Close() + _, err := io.Copy(ioutil.Discard, io.LimitReader(body, respReadLimit)) + if err != nil { + if c.logger() != nil { + switch v := c.logger().(type) { + case LeveledLogger: + v.Error("error reading response body", "error", err) + case Logger: + v.Printf("[ERR] error reading response body: %v", err) + } + } + } +} + +// Get is a shortcut for doing a GET request without making a new client. +func Get(url string) (*http.Response, error) { + return defaultClient.Get(url) +} + +// Get is a convenience helper for doing simple GET requests. +func (c *Client) Get(url string) (*http.Response, error) { + req, err := NewRequest("GET", url, nil) + if err != nil { + return nil, err + } + return c.Do(req) +} + +// Head is a shortcut for doing a HEAD request without making a new client. +func Head(url string) (*http.Response, error) { + return defaultClient.Head(url) +} + +// Head is a convenience method for doing simple HEAD requests. +func (c *Client) Head(url string) (*http.Response, error) { + req, err := NewRequest("HEAD", url, nil) + if err != nil { + return nil, err + } + return c.Do(req) +} + +// Post is a shortcut for doing a POST request without making a new client. +func Post(url, bodyType string, body interface{}) (*http.Response, error) { + return defaultClient.Post(url, bodyType, body) +} + +// Post is a convenience method for doing simple POST requests. +func (c *Client) Post(url, bodyType string, body interface{}) (*http.Response, error) { + req, err := NewRequest("POST", url, body) + if err != nil { + return nil, err + } + req.Header.Set("Content-Type", bodyType) + return c.Do(req) +} + +// PostForm is a shortcut to perform a POST with form data without creating +// a new client. +func PostForm(url string, data url.Values) (*http.Response, error) { + return defaultClient.PostForm(url, data) +} + +// PostForm is a convenience method for doing simple POST operations using +// pre-filled url.Values form data. +func (c *Client) PostForm(url string, data url.Values) (*http.Response, error) { + return c.Post(url, "application/x-www-form-urlencoded", strings.NewReader(data.Encode())) +} + +// StandardClient returns a stdlib *http.Client with a custom Transport, which +// shims in a *retryablehttp.Client for added retries. +func (c *Client) StandardClient() *http.Client { + return &http.Client{ + Transport: &RoundTripper{Client: c}, + } +} diff --git a/vendor/github.com/hashicorp/go-retryablehttp/roundtripper.go b/vendor/github.com/hashicorp/go-retryablehttp/roundtripper.go new file mode 100644 index 00000000..8c407adb --- /dev/null +++ b/vendor/github.com/hashicorp/go-retryablehttp/roundtripper.go @@ -0,0 +1,55 @@ +// Copyright (c) HashiCorp, Inc. +// SPDX-License-Identifier: MPL-2.0 + +package retryablehttp + +import ( + "errors" + "net/http" + "net/url" + "sync" +) + +// RoundTripper implements the http.RoundTripper interface, using a retrying +// HTTP client to execute requests. +// +// It is important to note that retryablehttp doesn't always act exactly as a +// RoundTripper should. This is highly dependent on the retryable client's +// configuration. +type RoundTripper struct { + // The client to use during requests. If nil, the default retryablehttp + // client and settings will be used. + Client *Client + + // once ensures that the logic to initialize the default client runs at + // most once, in a single thread. + once sync.Once +} + +// init initializes the underlying retryable client. +func (rt *RoundTripper) init() { + if rt.Client == nil { + rt.Client = NewClient() + } +} + +// RoundTrip satisfies the http.RoundTripper interface. +func (rt *RoundTripper) RoundTrip(req *http.Request) (*http.Response, error) { + rt.once.Do(rt.init) + + // Convert the request to be retryable. + retryableReq, err := FromRequest(req) + if err != nil { + return nil, err + } + + // Execute the request. + resp, err := rt.Client.Do(retryableReq) + // If we got an error returned by standard library's `Do` method, unwrap it + // otherwise we will wind up erroneously re-nesting the error. + if _, ok := err.(*url.Error); ok { + return resp, errors.Unwrap(err) + } + + return resp, err +} diff --git a/vendor/modules.txt b/vendor/modules.txt index e03807d1..21436c29 100644 --- a/vendor/modules.txt +++ b/vendor/modules.txt @@ -11,7 +11,7 @@ github.com/container-storage-interface/spec/lib/go/csi # github.com/digitalocean/go-metadata v0.0.0-20220602160802-6f1b22e9ba8c ## explicit github.com/digitalocean/go-metadata -# github.com/digitalocean/godo v1.99.0 +# github.com/digitalocean/godo v1.102.1 ## explicit; go 1.18 github.com/digitalocean/godo github.com/digitalocean/godo/metrics @@ -79,6 +79,12 @@ github.com/google/go-querystring/query # github.com/google/uuid v1.3.0 ## explicit github.com/google/uuid +# github.com/hashicorp/go-cleanhttp v0.5.2 +## explicit; go 1.13 +github.com/hashicorp/go-cleanhttp +# github.com/hashicorp/go-retryablehttp v0.7.4 +## explicit; go 1.13 +github.com/hashicorp/go-retryablehttp # github.com/kr/text v0.2.0 ## explicit # github.com/kubernetes-csi/csi-test/v4 v4.4.0