From 35d8a907bceca92c8e5927da4dfe195c9cf6ac62 Mon Sep 17 00:00:00 2001 From: ophub Date: Fri, 31 Mar 2023 02:10:57 +0000 Subject: [PATCH] Update Document --- build-armbian/documents/README.cn.md | 2 +- build-armbian/documents/README.md | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/build-armbian/documents/README.cn.md b/build-armbian/documents/README.cn.md index 1627e6da7a..649d9144ff 100644 --- a/build-armbian/documents/README.cn.md +++ b/build-armbian/documents/README.cn.md @@ -372,7 +372,7 @@ armbian-software ### 12.1 每个盒子的 dtb 和 u-boot 对应关系表 -支持的电视盒子列表在 `Armbian` 系统中配置文件的位置为 [/etc/model_database.conf](../armbian-files/common-files/etc/model_database.conf)，在 `OpenWrt` 系统中配置文件的位置为 [/etc/model_database.conf](https://github.com/ophub/amlogic-s9xxx-openwrt/blob/main/make-openwrt/openwrt-files/common-files/etc/model_database.conf)。 +支持的电视盒子列表在 `Armbian` 系统中配置文件的位置为 [/etc/model_database.conf](../armbian-files/common-files/etc/model_database.conf)。 其中 `BUILD` 的值是 `yes` 的是默认打包的部分盒子的系统，这些盒子可以直接使用。默认值是 `no` 的没有打包，这些没有打包的盒子使用时需要下载相同 `FAMILY` 的打包好的系统（推荐下载 `5.15/5.4` 内核的系统），在写入 `USB` 后，可以在电脑上打开 `USB 中的 boot 分区`，修改 `/boot/uEnv.txt` 文件中 `FDT 的 dtb 名称`，适配列表中的其他盒子。 diff --git a/build-armbian/documents/README.md b/build-armbian/documents/README.md index 8c6dfc9a3b..1ade0eedb0 100644 --- a/build-armbian/documents/README.md +++ b/build-armbian/documents/README.md @@ -362,7 +362,7 @@ In the use of Armbian, some common problems that may be encountered are summariz ### 12.1 dtb and u-boot correspondence table for each box -The list of supported TV boxes is located in the configuration file of the `Armbian` system is [/etc/model_database.conf](../armbian-files/common-files/etc/model_database.conf), and the configuration file in the `OpenWrt` system is [/etc/model_database.conf](https://github.com/ophub/amlogic-s9xxx-openwrt/blob/main/make-openwrt/openwrt-files/common-files/etc/model_database.conf). +The list of supported TV boxes is located in the configuration file of the `Armbian` system is [/etc/model_database.conf](../armbian-files/common-files/etc/model_database.conf). Where the value of `BUILD` is `yes`, it is the system of some boxes packed by default, and these boxes can be used directly. The default value is `no`, and these unpacked boxes need to download the same `FAMILY` packaged system (it is recommended to download the `5.15/5.4` kernel system). After writing to `USB`, you can open the `boot partition on USB` on the computer, modify the `dtb name of FDT` in the `/boot/uEnv.txt` file, and other boxes in the adaptation list.