This chapter describes user utilities.
The lfs utility can be used for user configuration routines and monitoring.
lfs
lfs changelog [--follow] mdt_name [startrec [endrec]]
lfs changelog_clear mdt_name id endrec
lfs check mds|osts|servers
lfs data_version [-nrw] filename
lfs df [-i] [-h] [--pool]-p fsname[.pool] [path] [--lazy]
lfs find [[!] --atime|-A [-+]N] [[!] --mtime|-M [-+]N]
[[!] --ctime|-C [-+]N] [--maxdepth|-D N] [--name|-n pattern]
[--print|-p] [--print0|-P] [[!] --obd|-O ost_name[,ost_name...]]
[[!] --size|-S [+-]N[kMGTPE]] --type |-t {bcdflpsD}]
[[!] --gid|-g|--group|-G gname|gid]
[[!] --uid|-u|--user|-U uname|uid]
dirname|filename
lfs getname [-h]|[path...]
lfs getstripe [--obd|-O ost_name] [--quiet|-q] [--verbose|-v]
[--stripe-count|-c] [--stripe-index|-i]
[--stripe-size|-s] [--pool|-p] [--directory|-d]
[--mdt-index|-M] [--recursive|-r] [--raw|-R]
[--layout|-L]
dirname|filename ...
lfs setstripe [--size|-s stripe_size] [--stripe-count|-c stripe_count]
[--overstripe-count|-C stripe_count]
[--stripe-index|-i start_ost_index]
[--ost-list|-o ost_indicies]
[--pool|-p pool]
dirname|filename
lfs setstripe -d dir
lfs osts [path]
lfs pool_list filesystem[.pool]| pathname
lfs quota [-q] [-v] [-h] [-o obd_uuid|-I ost_idx|-i mdt_idx]
[-u username|uid|-g group|gid|-p projid] /mount_point
lfs quota -t -u|-g|-p /mount_point
lfs quotacheck [-ug] /mount_point
lfs quotachown [-i] /mount_point
lfs quotainv [-ug] [-f] /mount_point
lfs quotaon [-ugf] /mount_point
lfs quotaoff [-ug] /mount_point
lfs setquota {-u|--user|-g|--group|-p|--project} uname|uid|gname|gid|projid
[--block-softlimit block_softlimit]
[--block-hardlimit block_hardlimit]
[--inode-softlimit inode_softlimit]
[--inode-hardlimit inode_hardlimit]
/mount_point
lfs setquota -u|--user|-g|--group|-p|--project uname|uid|gname|gid|projid
[-b block_softlimit] [-B block_hardlimit]
[-i inode-softlimit] [-I inode_hardlimit]
/mount_point
lfs setquota -t -u|-g|-p [--block-grace block_grace]
[--inode-grace inode_grace]
/mount_point
lfs setquota -t -u|-g|-p [-b block_grace] [-i inode_grace]
/mount_point
lfs help
Note
In the above example, the /mount_point parameter refers to the mount point of the Lustre file system.
Note
The old lfs quota output was very detailed and contained cluster-wide quota statistics (including cluster-wide limits for a user/group and cluster-wide usage for a user/group), as well as statistics for each MDS/OST. Now, lfs quota has been updated to provide only cluster-wide statistics, by default. To obtain the full report of cluster-wide limits, usage and statistics, use the -v option with lfs quota.
The quotacheck, quotaon and quotaoff sub-commands were deprecated in the Lustre 2.4 release, and removed completely in the Lustre 2.8 release. See Section “ Enabling Disk Quotas” for details on configuring and checking quotas.
The lfs utility is used to create a new file with a specific striping pattern, determine the default striping pattern, gather the extended attributes (object numbers and location) for a specific file, find files with specific attributes, list OST information or set quota limits. It can be invoked interactively without any arguments or in a non-interactive mode with one of the supported arguments.
The various lfs options are listed and described below. For a complete list of available options, type help at the lfsprompt.
| Option | Description | |
|---|---|---|
changelog |
Shows the metadata changes on an MDT. Start and end points are optional. The --follow option blocks on new changes; this option is only valid when run directly on the MDT node. |
|
changelog_clear |
Indicates that changelog records previous to *endrec* are no longer of interest to a particular consumer *id* , potentially allowing the MDT to free up disk space. An *endrec* of 0 indicates the current last record. Changelog consumers must be registered on the MDT node using lctl. |
|
check |
Displays the status of MDS or OSTs (as specified in the command) or all servers (MDS and OSTs). | |
data_version [-nrw] *filename* |
Displays the current version of file data. If -n is specified, the data version is read without taking a lock. As a consequence, the data version could be outdated if there are dirty caches on filesystem clients, but this option will not force data flushes and has less of an impact on the filesystem. If -r is specified, the data version is read after dirty pages on clients are flushed. If -w is specified, the data version is read after all caching pages on clients are flushed.Even with -r or -w, race conditions are possible and the data version should be checked before and after an operation to be confident the data did not change during it.The data version is the sum of the last committed transaction numbers of all data objects of a file. It is used by HSM policy engines for verifying that file data has not been changed during an archive operation or before a release operation, and by OST migration, primarily for verifying that file data has not been changed during a data copy, when done in non-blocking mode. |
|
| `df [-i] [-h] [--pool | -pfsname[. pool] [ path] [--lazy]` | Use -i to report file system disk space usage or inode usage of each MDT or OST or, if a pool is specified with the -p option, a subset of OSTs.By default, the usage of all mounted Lustre file systems is reported. If thepath option is included, only the usage for the specified file system is reported. If the -h option is included, the output is printed in human-readable format, using SI base-2 suffixes for Mega-, Giga-, Tera-, Peta-, orExabytes.If the --lazy option is specified, any OST that is currently disconnected from the client will be skipped. Using the --lazy option prevents the df output from being blocked when an OST is offline. Only the space on the OSTs that can currently be accessed are returned. The llite.*.lazystatfs tunable can be enabled to make this the default behaviour for all statfs()operations. |
find |
Searches the directory tree rooted at the given directory/filename for files that match the given parameters.Using ! before an option negates its meaning (files NOT matching the parameter). Using + before a numeric value means files with the parameter OR MORE. Using - before a numeric value means files with the parameter OR LESS. |
|
--atime |
File was last accessed N*24 hours ago. (There is no guarantee that atime is kept coherent across the cluster.) OSTs by default only hold a transient atime that is updated when clients do read requests. Permanent atime is written to the MDT when the file is closed. However, on-disk atime is only updated if it is more than 60 seconds old (mdd.*.atime_diff). In Lustre 2.14, it is possible to set the OSTs to persistently store atime with each object, in order to get more accurate persistent atime updates for files that are open for a long time via the similarly-named obdfilter.*.atime_diff parameter.The client considers the latest atime from all OSTs and MDTs. If a setattr is set by user, then it is updated on both the MDT and OST, allowing the atime to go backward. |
|
--ctime |
File status was last changed N*24 hours ago. | |
--mtime |
File data was last modified N*24 hours ago. | |
--obd |
File has an object on a specific OST(s). | |
--size |
File has a size in bytes, or kilo-, Mega-, Giga-, Tera-, Peta- or Exabytes if a suffix is given. | |
--type |
File has the type - block, character, directory, pipe, file, symlink, socket or door (used in Solaris operating system). | |
--uid |
File has a specific numeric user ID. | |
--user |
File owned by a specific user (numeric user ID allowed). | |
--gid |
File has a specific group ID. | |
--group |
File belongs to a specific group (numeric group ID allowed). | |
- -maxdepth |
Limits find to descend at most N levels of the directory tree. | |
--print/ --print0 |
Prints the full filename, followed by a new line or NULL character correspondingly. | |
osts [path] |
Lists all OSTs for the file system. If a path located on a mounted Lustre file system is specified, then only OSTs belonging to this file system are displayed. | |
getname [path...] |
List each Lustre file system instance associated with each Lustre mount point. If no path is specified, all Lustre mount points are interrogated. If a list of paths is provided, the instance of each path is provided. If the path is not a Lustre instance 'No such device' is returned. | |
getstripe |
Lists striping information for a given filename or directory. By default, the stripe count, stripe size and offset are returned.If you only want specific striping information, then the options of --stripe-count, --stripe-size, --stripe-index, --layout, or --pool plus various combinations of these options can be used to retrieve specific information.If the --raw option is specified, the stripe information is printed without substituting the file system default values for unspecified fields. If the striping EA is not set, 0, 0, and -1 will be printed for the stripe count, size, and offset respectively.Introduced in Lustre 2.4The --mdt-index prints the index of the MDT for a given directory. See the section called “Removing an MDT from the File System”). |
|
--obd *ost_name* |
Lists files that have an object on a specific OST. | |
--quiet |
Lists details about the file's object ID information. | |
--stripe-count |
Prints additional striping information. | |
--count |
Lists the stripe count (how many OSTs to use). | |
--index |
Lists the index for each OST in the file system. | |
--offset |
Lists the OST index on which file striping starts. | |
--pool |
Lists the pools to which a file belongs. | |
--size |
Lists the stripe size (how much data to write to one OST before moving to the next OST). | |
--directory |
Lists entries about a specified directory instead of its contents (in the same manner as ls -d). |
|
--recursive |
Recurses into all sub-directories. | |
setstripe |
Create new files with a specific file layout (stripe pattern) configuration[a]. | |
--stripe-count stripe_cnt |
Number of OSTs over which to stripe a file. A stripe_cnt of 0 uses the file system-wide default stripe count (default is 1). A stripe_cnt of -1 stripes over all available OSTs. |
|
--overstripe-count stripe_cnt |
The same as --stripe-count, but allows overstriping, which will place more than one stripe per OST if stripe_cnt is greater than the number of OSTs. Overstriping is useful for matching the number of stripes to the number of processes, or with very fast OSTs, where one stripe per OST is not enough to get full performance. |
|
--size stripe_size[b] |
Number of bytes to store on an OST before moving to the next OST. A stripe_size of 0 uses the file system's default stripe size, (default is 1 MB). Can be specified with k(KB), m(MB), or g(GB), respectively. | |
--stripe-index start_ost_index |
The OST index (base 10, starting at 0) on which to start striping for this file. A start_ost_index value of -1 allows the MDS to choose the starting index. This is the default value, and it means that the MDS selects the starting OST as it wants. We strongly recommend selecting this default, as it allows space and load balancing to be done by the MDS as needed. The start_ost_indexvalue has no relevance on whether the MDS will use round-robin or QoS weighted allocation for the remaining stripes in the file. |
|
--ost-index ost_indices |
This option is used to specify the exact stripe layout on the the file system. ost_indices is a list of OSTs referenced by their indices and index ranges separated by commas, e.g. 1,2-4,7. |
|
--pool pool |
Name of the pre-defined pool of OSTs (see the section called “ lctl”) that will be used for striping. The stripe_cnt, stripe_size and start_ost values are used as well. The start-ost value must be part of the pool or an error is returned. |
|
setstripe -d |
Deletes default striping on the specified directory. | |
| `pool_list {filesystem}[.poolname] | {pathname}` | Lists pools in the file system or pathname, or OSTs in the file system's pool. |
| `quota [-q] [-v] [-oobd_uuid | -i mdt_idx | -Iost_idx] [-u |
| `quota -t *-u | -g | -p**/mount_point*` |
| `setquota {-u | -g | -p uname |
| `setquota -t -u | -g | -p [--block-grace block_grace] [--inode-grace inode_grace]/mount_point` |
help |
Provides brief help on various lfs arguments. |
|
exit/quit |
Quits the interactive lfs session. |
|
[a]The file cannot exist prior to using setstripe. A directory must exist prior to using setstripe.[b]The default stripe-size is 0. The default start-ost is -1. Do NOT confuse them! If you set start-ost to 0, all new file creations occur on OST 0 (seldom a good idea). [c]The old setquota interface is supported, but it may be removed in a future Lustre software release. |
Creates a file striped on two OSTs with 128 KB on each stripe.
$ lfs setstripe -s 128k -c 2 /mnt/lustre/file1
Deletes a default stripe pattern on a given directory. New files use the default striping pattern.
$ lfs setstripe -d /mnt/lustre/dir
Lists the detailed object allocation of a given file.
$ lfs getstripe -v /mnt/lustre/file1
List all the mounted Lustre file systems and corresponding Lustre instances.
$ lfs getname
Efficiently lists all files in a given directory and its subdirectories.
$ lfs find /mnt/lustre
Recursively lists all regular files in a given directory more than 30 days old.
$ lfs find /mnt/lustre -mtime +30 -type f -print
Recursively lists all files in a given directory that have objects on OST2-UUID. The lfs check servers command checks the status of all servers (MDT and OSTs).
$ lfs find --obd OST2-UUID /mnt/lustre/
Lists all OSTs in the file system.
$ lfs osts
Lists space usage per OST and MDT in human-readable format.
$ lfs df -h
Lists inode usage per OST and MDT.
$ lfs df -i
List space or inode usage for a specific OST pool.
$ lfs df --pool
filesystem[.
pool] |
pathname
List quotas of user 'bob'.
$ lfs quota -u bob /mnt/lustre
List quotas of project ID '1'.
$ lfs quota -p 1 /mnt/lustre
Show grace times for user quotas on /mnt/lustre.
$ lfs quota -t -u /mnt/lustre
Sets quotas of user 'bob', with a 1 GB block quota hardlimit and a 2 GB block quota softlimit.
$ lfs setquota -u bob --block-softlimit 2000000 --block-hardlimit 1000000
/mnt/lustre
Sets grace times for user quotas: 1000 seconds for block quotas, 1 week and 4 days for inode quotas.
$ lfs setquota -t -u --block-grace 1000 --inode-grace 1w4d /mnt/lustre
Checks the status of all servers (MDT, OST)
$ lfs check servers
Creates a file striped on two OSTs from the pool my_pool
$ lfs setstripe --pool my_pool -c 2 /mnt/lustre/file
Lists the pools defined for the mounted Lustre file system /mnt/lustre
$ lfs pool_list /mnt/lustre/
Lists the OSTs which are members of the pool my_pool in file system my_fs
$ lfs pool_list my_fs.my_pool
Finds all directories/files associated with poolA.
$ lfs find /mnt/lustre --pool poolA
Finds all directories/files not associated with a pool.
$ lfs find /mnt//lustre --pool ""
Finds all directories/files associated with pool.
$ lfs find /mnt/lustre ! --pool ""
Associates a directory with the pool my_pool, so all new files and directories are created in the pool.
$ lfs setstripe --pool my_pool /mnt/lustre/dir
The lfs_migrate utility is a simple to migrate file data between OSTs.
lfs_migrate [lfs_setstripe_options]
[-h] [-n] [-q] [-R] [-s] [-y] [-0] [file|directory ...]
The lfs_migrate utility is a tool to assist migration of file data between Lustre OSTs. The utility copies each specified file to a temporary file using supplied lfs setstripe options, if any, optionally verifies the file contents have not changed, and then swaps the layout (OST objects) from the temporary file and the original file (for Lustre 2.5 and later), or renames the temporary file to the original filename. This allows the user/administrator to balance space usage between OSTs, or move files off OSTs that are starting to show hardware problems (though are still functional) or will be removed.
Warning
For versions of Lustre before 2.5, lfs_migrate was not integrated with the MDS at all. That made it UNSAFE for use on files that were being modified by other applications, since the file was migrated through a copy and rename of the file. With Lustre 2.5 and later, the new file layout is swapped with the existing file layout, which ensures that the user-visible inode number is kept, and open file handles and locks on the file are kept.
Files to be migrated can be specified as command-line arguments. If a directory is specified on the command-line then all files within the directory are migrated. If no files are specified on the command-line, then a list of files is read from the standard input, making lfs_migrate suitable for use with lfs find to locate files on specific OSTs and/or matching other file attributes, and other tools that generate a list of files on standard output.
Unless otherwise specified through command-line options, the file allocation policies on the MDS dictate where the new files are placed, taking into account whether specific OSTs have been disabled on the MDS via lctl (preventing new files from being allocated there), whether some OSTs are overly full (reducing the number of files placed on those OSTs), or if there is a specific default file striping for the parent directory (potentially changing the stripe count, stripe size, OST pool, or OST index of a new file).
Note
The lfs_migrate utility can also be used in some cases to reduce file fragmentation. File fragmentation will typically reduce Lustre file system performance. File fragmentation may be observed on an aged file system and will commonly occur if the file was written by many threads. Provided there is sufficient free space (or if it was written when the file system was nearly full) that is less fragmented than the file being copied, re-writing a file with lfs_migrate will result in a migrated file with reduced fragmentation. The tool filefrag can be used to report file fragmentation. See the section called “ filefrag ”
Note
As long as a file has extent lengths of tens of megabytes ( read_bandwidth * seek_time) or more, the read performance for the file will not be significantly impacted by fragmentation, since the read pipeline can be filled by large reads from disk even with an occasional disk seek.
Options supporting lfs_migrate are described below.
| Option | Description |
|---|---|
-c*stripecount* |
Restripe file using the specified stripe count. This option may not be specified at the same time as the -R option. |
-h |
Display help information. |
-l |
Migrate files with hard links (skips, by default). Files with multiple hard links are split into multiple separate files by lfs_migrate, so they are skipped, by default, to avoid breaking the hard links. |
-n |
Only print the names of files to be migrated. |
-q |
Run quietly (does not print filenames or status). |
-R |
Restripe file using default directory striping instead of keeping striping. This option may not be specified at the same time as the -c option. |
-s |
Skip file data comparison after migrate. Default is to compare migrated file against original to verify correctness. |
-y |
Answer ' y' to usage warning without prompting (for scripts, use with caution). |
-0 |
Expect NUL-terminated filenames on standard input, as generated by lfs find -print0 or find -print0. This allows filenames with embedded newlines to be handled correctly. |
Rebalance all files in /mnt/lustre/dir:
$ lfs_migrate /mnt/lustre/dir
Migrate files in /test filesystem on OST0004 larger than 4 GB in size and older than a day old:
$ lfs find /test -obd test-OST0004 -size +4G -mtime +1 | lfs_migrate -y
the section called “ lfs ”
The e2fsprogs package contains the filefrag tool which reports the extent of file fragmentation.
filefrag [ -belsv ] [ files... ]
The filefrag utility reports the extent of fragmentation in a given file. The filefrag utility obtains the extent information from Lustre files using the FIEMAP ioctl, which is efficient and fast, even for very large files.
In default mode [5], filefrag prints the number of physically discontiguous extents in the file. In extent or verbose mode, each extent is printed with details such as the blocks allocated on each OST. For a Lustre file system, the extents are printed in device offset order (i.e. all of the extents for one OST first, then the next OST, etc.), not file logical offset order. If the file logical offset order was used, the Lustre striping would make the output very verbose and difficult to see if there was file fragmentation or not.
Note
Note that as long as a file has extent lengths of tens of megabytes or more (i.e. read_bandwidth * seek_time > extent_length), the read performance for the file will not be significantly impacted by fragmentation, since file readahead can fully utilize the disk disk bandwidth even with occasional seeks.
In default mode [6], filefrag returns the number of physically discontiguous extents in the file. In extent or verbose mode, each extent is printed with details. For a Lustre file system, the extents are printed in device offset order, not logical offset order.
[5]The default mode is faster than the verbose/extent mode since it only counts the number of extents.
[6]The default mode is faster than the verbose/extent mode
The options and descriptions for the filefrag utility are listed below.
| Option | Description |
|---|---|
-b |
Uses the 1024-byte blocksize for the output. By default, this blocksize is used by the Lustre file system, since OSTs may use different block sizes. |
-e |
Uses the extent mode when printing the output. This is the default for Lustre files in verbose mode. |
-l |
Displays extents in LUN offset order. This is the only available mode for Lustre. |
-s |
Synchronizes any unwritten file data to disk before requesting the mapping. |
-v |
Prints the file's layout in verbose mode when checking file fragmentation, including the logical to physical mapping for each extent in the file and the OST index. |
Lists default output.
$ filefrag /mnt/lustre/foo
/mnt/lustre/foo: 13 extents found
Lists verbose output in extent format.
$ filefrag -v /mnt/lustre/foo
Filesystem type is: bd00bd0
File size of /mnt/lustre/foo is 1468297786 (1433888 blocks of 1024 bytes)
ext: device_logical: physical_offset: length: dev: flags:
0: 0.. 122879: 2804679680..2804802559: 122880: 0002: network
1: 122880.. 245759: 2804817920..2804940799: 122880: 0002: network
2: 245760.. 278527: 2804948992..2804981759: 32768: 0002: network
3: 278528.. 360447: 2804982784..2805064703: 81920: 0002: network
4: 360448.. 483327: 2805080064..2805202943: 122880: 0002: network
5: 483328.. 606207: 2805211136..2805334015: 122880: 0002: network
6: 606208.. 729087: 2805342208..2805465087: 122880: 0002: network
7: 729088.. 851967: 2805473280..2805596159: 122880: 0002: network
8: 851968.. 974847: 2805604352..2805727231: 122880: 0002: network
9: 974848.. 1097727: 2805735424..2805858303: 122880: 0002: network
10: 1097728.. 1220607: 2805866496..2805989375: 122880: 0002: network
11: 1220608.. 1343487: 2805997568..2806120447: 122880: 0002: network
12: 1343488.. 1433599: 2806128640..2806218751: 90112: 0002: network
/mnt/lustre/foo: 13 extents found
The standard mount(8) Linux command is used to mount a Lustre file system. When mounting a Lustre file system, mount(8) executes the /sbin/mount.lustre command to complete the mount. The mount command supports these options specific to a Lustre file system:
| Server options | Description |
|---|---|
abort_recov |
Aborts recovery when starting a target |
nosvc |
Starts only MGS/MGC servers |
nomgs |
Start a MDT with a co-located MGS without starting the MGS |
exclude |
Starts with a dead OST |
md_stripe_cache_size |
Sets the stripe cache size for server side disk with a striped raid configuration |
| Client options | Description |
|---|---|
flock/noflock/localflock |
Enables/disables global flock or local flock support |
user_xattr/nouser_xattr |
Enables/disables user-extended attributes |
user_fid2path/nouser_fid2path |
Enables/disables FID to path translation by regular users |
retry= |
Number of times a client will retry to mount the file system |
Timeouts are the most common cause of hung applications. After a timeout involving an MDS or failover OST, applications attempting to access the disconnected resource wait until the connection gets established.
When a client performs any remote operation, it gives the server a reasonable amount of time to respond. If a server does not reply either due to a down network, hung server, or any other reason, a timeout occurs which requires a recovery.
If a timeout occurs, a message (similar to this one), appears on the console of the client, and in/var/log/messages:
LustreError: 26597:(client.c:810:ptlrpc_expire_one_request()) @@@ timeout
req@a2d45200 x5886/t0 o38->mds_svc_UUID@NID_mds_UUID:12 lens 168/64 ref 1 fl
RPC:/0/0 rc 0