BoardConfig.mk

# Copyright (C) 2012 The CyanogenMod Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

#
# This file sets variables that control the way modules are built
# thorughout the system. It should not be used to conditionally
# disable makefiles (the proper mechanism to control what gets
# included in a build is to use PRODUCT_PACKAGES in a product
# definition file).
#

# WARNING: This line must come *before* including the proprietary
# variant, so that it gets overwritten by the parent (which goes
# against the traditional rules of inheritance).
USE_CAMERA_STUB := true

# inherit from the proprietary version
-include vendor/samsung/ariesve/BoardConfigVendor.mk

TARGET_SPECIFIC_HEADER_PATH := device/samsung/ariesve/include

TARGET_BOARD_PLATFORM := msm7x30
TARGET_ARCH_VARIANT_CPU := cortex-a8
TARGET_BOARD_PLATFORM_GPU := qcom-adreno200


TARGET_CPU_ABI := armeabi-v7a
TARGET_CPU_ABI2 := armeabi

# Enable NEON feature
TARGET_ARCH := arm
TARGET_ARCH_VARIANT := armv7-a-neon
TARGET_USE_SCORPION_BIONIC_OPTIMIZATION := true

COMMON_GLOBAL_CFLAGS += -DQCOM_HARDWARE -DQCOM_NO_SECURE_PLAYBACK
COMMON_GLOBAL_CFLAGS += -DBINDER_COMPAT -DSAMSUNG_CAMERA_QCOM


TARGET_BOOTLOADER_BOARD_NAME := ariesve
TARGET_OTA_ASSERT_DEVICE := ariesve,GT-I9001

TARGET_NO_BOOTLOADER := true
TARGET_NO_RADIOIMAGE := true

TARGET_NO_INITLOGO := true

TARGET_SCREEN_HEIGHT := 800
TARGET_SCREEN_WIDTH := 480

# Wifi related defines
WIFI_BAND := 802_11_ABG
WPA_SUPPLICANT_VERSION := VER_0_8_X
BOARD_WPA_SUPPLICANT_DRIVER := NL80211
BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_bcmdhd
BOARD_HOSTAPD_DRIVER := NL80211
BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_bcmdhd
BOARD_WLAN_DEVICE := bcmdhd

WIFI_DRIVER_MODULE_PATH := "/lib/modules/dhd.ko"
WIFI_DRIVER_MODULE_NAME := "dhd"
WIFI_DRIVER_MODULE_ARG := "firmware_path=/vendor/firmware/fw_bcmdhd.bin nvram_path=/vendor/firmware/nvram_net.txt"
WIFI_DRIVER_FW_PATH_PARAM := "/sys/module/dhd/parameters/firmware_path"
WIFI_DRIVER_FW_PATH_STA := "/vendor/firmware/fw_bcmdhd.bin"
WIFI_DRIVER_FW_PATH_AP := "/vendor/firmware/fw_bcmdhd_apsta.bin"

BOARD_KERNEL_BASE := 0x00400000
BOARD_KERNEL_PAGESIZE := 4096

# Bluetooth
BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := device/samsung/ariesve/bluetooth/
BOARD_BLUEDROID_VENDOR_CONF := device/samsung/ariesve/bluetooth/vnd_msm7x30.txt
BOARD_HAVE_BLUETOOTH := true
BOARD_HAVE_BLUETOOTH_BCM := true
TARGET_NEEDS_BLUETOOTH_INIT_DELAY := true

BOARD_MOBILEDATA_INTERFACE_NAME = "pdp0"

BOARD_USES_LEGACY_RIL := true
BOARD_USES_LIBSECRIL_STUB := true

BOARD_HAVE_SAMSUNG_AUDIO := true
BOARD_USES_QCOM_AUDIO_RESETALL := true
BOARD_USES_QCOM_AUDIO_VOIPMUTE := true

TARGET_QCOM_AUDIO_VARIANT := caf
TARGET_QCOM_DISPLAY_VARIANT := caf

#BOARD_USES_QCOM_AUDIO_LPA := true

BOARD_EGL_CFG := device/samsung/ariesve/config/egl.cfg
TARGET_USES_ION := false
BOARD_EGL_NEEDS_LEGACY_FB := true

USE_OPENGL_RENDERER := true
BOARD_USE_SKIA_LCDTEXT := true


# QCOM webkit
TARGET_FORCE_CPU_UPLOAD := true
 
TARGET_NO_HW_VSYNC := true

TARGET_USES_C2D_COMPOSITION := true

BOARD_NEEDS_MEMORYHEAPPMEM := true

# QCOM webkit
ENABLE_WEBGL := true
TARGET_FORCE_CPU_UPLOAD := true
DYNAMIC_SHARED_LIBV8SO := true

BOARD_USES_QCOM_HARDWARE := true
BOARD_USES_QCOM_GPS := true

BOARD_USE_LEGACY_TOUCHSCREEN := true

# Camera stuff
TARGET_PROVIDES_CAMERA_HAL := true
BOARD_USES_LEGACY_OVERLAY := true
BOARD_CAMERA_USE_MM_HEAP := true
TARGET_DISABLE_ARM_PIE := true

TARGET_PROVIDES_LIBLIGHT := true

BOARD_VENDOR_QCOM_AMSS_VERSION := 6225
BOARD_VENDOR_QCOM_GPS_LOC_API_HARDWARE := msm7x30
BOARD_VENDOR_QCOM_GPS_LOC_API_AMSS_VERSION := 50000

TARGET_USERIMAGES_USE_EXT4 := true

BOARD_VOLD_EMMC_SHARES_DEV_MAJOR := true
BOARD_VOLD_MAX_PARTITIONS := 28

TARGET_USE_CUSTOM_LUN_FILE_PATH := /sys/devices/platform/msm_hsusb/gadget/lun%d/file

# Begin recovery stuff
#
# Partition sizes must match your phone.
# For the Galaxy S Plus, these are calculated from /proc/partitions
BOARD_BOOTIMAGE_PARTITION_SIZE := 5242880
BOARD_RECOVERYIMAGE_PARTITION_SIZE := 7864320
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 545259520
BOARD_USERDATAIMAGE_PARTITION_SIZE := 1447034880
BOARD_CACHEIMAGE_PARTITION_SIZE := 104857600
BOARD_FLASH_BLOCK_SIZE := 4096

BOARD_USES_MMCUTILS := true
BOARD_HAS_NO_MISC_PARTITION := true
BOARD_HAS_SDCARD_INTERNAL := true
TARGET_RECOVERY_PIXEL_FORMAT := "RGBX_8888"
BOARD_CUSTOM_RECOVERY_KEYMAPPING := ../../device/samsung/ariesve/recovery/recovery_keys.c
BOARD_CUSTOM_GRAPHICS := ../../../device/samsung/ariesve/recovery/graphics.c
TARGET_RECOVERY_INITRC := device/samsung/ariesve/config/init.recovery.rc
TARGET_RECOVERY_FSTAB := device/samsung/ariesve/recovery.fstab
# Enable below line if compiling for a recovery version before 6.0.1.2
#BOARD_UMS_LUNFILE := /sys/devices/platform/msm_hsusb/gadget/lun%d/file
# End recovery stuff

TARGET_PREBUILT_KERNEL := device/samsung/ariesve/prebuilt/zImage

BOARD_RIL_CLASS := ../../../device/samsung/ariesve/ril/